Find a professional gate installation in East London

Prepare the wrap around garden railing prior to painting it. Same for two front gates. One gate photo is enclosed but note there are two which need to be painted please. Wire brush followed by sanding followed by degrease/wash then 1 coat primer 2 coats paint applied.

Lock welded to metal gate. See pic

Prepare the wrap around garden railing prior to painting it. Same for two front gates. One gate photo is enclosed but note there are two which need to be painted please. Wire brush followed by sanding followed by degrease/wash then 1 coat primer 2 coats paint applied.

Power to lights and sockets appears to be flickering in our basement bedroom, which is behind the basement kitchen which doesn’t seem to be affected.

Hi, I have a metal garden gate on which the paint is flaking. I’d like it repainted please

Pedestrian access gate set within driveway gates needs to be welded back

Hi, I’m looking for someone to help with some installations in my home. I need 2 blinds and 2 baby gates installed. The baby gates are to help make the home safer and more suitable for my son, who has autism. Could you please let me know if this is something you can help with and how much it would cost? Thank you 😊

Paint my outside stone wall white and my gate black.

Hello, I would need this pedestrian gate installed tomorrow before 3pm - It’s wrought iron and quite heavy - all the hardware has been added by the blacksmith. The tasker would also need to unpack it. Finally, the number 167 would need to face the street. Thank you

I want to add garden fencing with gate only 2 or fencing to add

Build a gate for driveway to match the current fence. Advise the best support and closure method as fence posts aren’t the strongest.

I would like to remove this security gate from my balcony. Ideally the person removing would also dispose of it. I am on the third floor. See photos.

ABOUT 18 ft GATE - WOODEN

External paint job - painting balcony railing and front gates

3x shelves to install on partition wall (see photo for identical ones previously installed) 3x stair gates to install in doorways (see photos), this model: https://www.johnlewis.com/momcozy-retractable-baby-gate/white/p112262209?s_ppc=2dx_mixed_fashion_BAU&tmad=c&tmcampid=2&gclsrc=aw.ds&gad_source=1&gad_campaignid=20155423421&gbraid=0AAAAAD2el1zVkThidcwXgkjtnHAHfI1uz&gclid=CjwKCAjwpqHTBhAcEiwAj2AfuhnhdyMDARIpTuYHtJuE9IIg3TCMuRxhqyE1iG3vgKTC-qV_-sXNjxoCFrwQAvD_BwE

I would want side gate to be done I have the gate and everything needed for installation

I’m looking for someone to improve the rear gate entrance to my property so it can be used for vehicle access. The area outside the gates is currently overgrown and uneven, and I’d like it cleared, prepared and finished with a durable concrete base. I have attached a generated image of what it will end up looking like. Budget is a placeholder, please quote in your offer The existing wooden double gates also need adjusting so they open and close smoothly and are easy to use when driving a car through. The hinges, latches or alignment may need repair too

I have a pet gate that needs to be installed on an exterior wall. The walls are on either side and this may need small wood panel added then the gate fitted on to the wood panel.

I need to have a gate built out of composite panelling and posts that I have already bought .. it needs to be reinforced with rods for support wheels suitable for composite fittings , and to slide across the opening on the slabs for space saving .. I have uploaded pictures. The size is around 140 wide can be built either at a height of 4ft or 6ft in height depending on which level it can be mounted . There are two post 3 /5 panels and a trellis top to build gate like in picture To match the remaining screen / fence in rear entrance of property.. it’s will need someone who has a vision like in the 1- 5 pictures below .. that’s what I want it to look like ..

Looking for someone experienced with fence/gate repairs to fix a damaged wooden side gate/fence panel. The gate/fence has collapsed and is leaning heavily. Likely needs: * Re-securing or replacing support posts/brackets * Straightening and securing the fence panels * Fixing the gate alignment so it opens/closes properly * Bringing your own tools/materials if needed Would prefer someone who: Has experience with fencing/gate repairs Can assess whether repair or partial replacement is best Can complete the job properly and securely, not just a temporary fix Please include: Your quote Availability Whether materials are included