Hire a trusted wall mounting service in London

I have the following materials for a post rack (with nails) that need to be assembled on the wall in our communal flat building hallway. I do not have a drill to do this myself. These are the products purchased: post rack 1 - https://www.amazon.co.uk/dp/B08616PML1?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1 post rack 2 - https://www.amazon.co.uk/dp/B08MT4RX9Y?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

I need my tv mounted to my plasterboard wall, also a heavy duty mirror, another small mirror and 3 small lightweight shelf things. I have the plasterboard fittings and tv wall mount but dont have any drill or the tools needed to do it

Mount a staircase railing onto the wall on stairs

I need a handy man to change 3 spotlight mechanisms and adjust sliding doors of fitted wardrobe as they cannot fully close

I need help mounting a 77 inch tv, curtain tracks in the bedrooms, roller blinds in the living room and assembly of ikea furniture.

I’m looking for someone to take my tv from inside off the wall and move it to the other side

Internal FD30 fire door replacement & damaged frame repair I’m looking for an experienced door fitter/carpenter to remove and replace an internal fire-rated door and repair the existing damaged door frame. The existing door/frame has been damaged when I had to force the door open. There is broken/chipped timber around the latch/strike area of the frame, and I need this repaired and made good before/while fitting the new door. Work required: * Remove existing door * Assess and repair the damaged door frame, particularly around the latch/strike area * Make sure the frame is solid and suitable for the new door * Fit new 1981 × 838 × 44mm FD30 fire-rated door * Fit 3 × 102mm fire-rated hinges * Fit 76mm ERA nickel tubular latch * Fit the new strike/keep plate supplied with the latch * Refit my existing door handles, if suitable * Ensure the door is correctly aligned and closes/latches securely * Fit the supplied intumescent seals as required I have already purchased the door and all of the above hardware, so I’m primarily looking for labour and any additional materials required to repair/make good the frame. Important: The frame repair is an important part of this job. I’m looking for someone experienced with door-frame repairs/making good as well as fitting FD30 fire doors, rather than someone who only hangs doors.

I am needing 5 pictures hung up, a mirror and a TV. Some may be on brick work and others on plasterboard.

I need to hang a mirror. It must be mounted to the wall with proper fixings. I got a mirror but you must bring tools required. Such as power drill, drill heads, etc

mount tv and soundbar on wall

I need this Coat Hanger installed properly and for good. It needs to hold some heavy coats. As you can see from the pictures I am a novice and after many failed attempts I hope someone with the right tools and experience can help.

Install toilet seat, hang wall picture frame, and fix a shelve

I need my TV to be remounted on my bedroom wall. I have the bracket

I need my 65-inch TCL TV wall mounted above my existing TV bench. The wall is solid masonry. I already have the One For All WM4411 fixed wall bracket and a D-Line 60 × 15 mm TV cable cover, so all mounting/cable-management parts will be supplied. I need the TV mounted centrally above the bench at a comfortable viewing height, perfectly level and straight/parallel to the wall. It should be mounted as close to the wall as reasonably possible while leaving enough clearance behind the TV for its protruding rear housing and cables. There are 3 HDMI cables and the TV power cable. These should be routed neatly behind the TV and down through the D-Line cable cover to behind the TV bench. Please bring the appropriate drill, tools and fixings for a solid masonry wall. Driveway parking is available.

We have 2 TVs that need mounting to the wall and 2 lamps we need to assemble and hang

hanging drop top desk. instructions are here: https://acrobat.adobe.com/id/urn:aaid:sc:EU:4ce02f9f-4bf9-486e-9ddd-6d4166ed884a. youtube video on what the asembling process looks like: https://youtube.com/shorts/z-xIXYQKBd8?is=T-Pc-bxl9-ndHVPB

Hang the floating shelf. Don’t have screws/self-props/dubels

Need to connect 3x IKEA Eket Cupboards to each other and suspend to the wall in our hallway

Im replacing the worktops in my van. So will need to have a drill and jigsaw. I also would like a bit of lino laid.

To change over 5 existing light sockets to new 5 light sockets.