Find experienced vinyl flooring contractors in London

Looking for a Professional to put a viny floor down in 3 small bathrooms and a corridor please

I would like to get LVT fitted in my bathroom. The bathroom measurements are 1.8mL 1.8mW I will supply the LVT flooring so please quote for the installation

Hi, I’m looking for vinyl flooring to be laid/fitted in my bathroom. I would like to see some sample pictures of which you can source. The flooring is 1.8m x 1.8m so a 2m roll will suffice. Would ideally like it done either tomorrow or the following day.

We need some vinyl flooring removed from our family bathroom and replaced with a new roll.

I’ve just had a new kitchen installed and would like vinyl flooring laid. I have it ready to go - the space is small measuring approx 2m x 1.40m.

Need someone to board the floor and lay LVT. Already have the ply wood and flooring just need someone to put it down due to a lack of time. Only around 1.2mq2

Lay adhesive slats - small kitchen - 2hr job for an experienced person

I have approximately 100sqm of floor, it is all the ground floor of my house. I would like lay LVT flooring; glue down in herringbone style. I will supply all materials.

To lay LVT Herringbone flooring in front, two bedrooms and a small hallway.

LVT replacement in bathroom- 4m2 (vinyl bought). Job doesn’t include glue/sealant. Must be fitted.

I’m looking for an experienced sheet vinyl installer to finish a parquet‑effect vinyl job I started… and then utterly messed up during the stencil cutting stage. I have managed to save most of it but, rather than make a bigger mess, I’d like a pro to finish. What needs doing: - Lay a 1.3m x 0.5 section of sheet vinyl and double cut with current edge and match pattern. - Fix 3 small areas where pieces need double cutting and matching. Looking for: Someone confident with sheet vinyl, double‑cut seams, and pattern matching — especially parquet designs. I have loads of offcuts that easily cover required area with needed pattern.

I need someone to lay a 2x2m vinyl floor in the bathroom. I’ve got the flooring and adhesive. I had a go myself but don’t have the necessary tools skills or patients for it.

Laying vinyl kitchen flooring

I have an LVT click floor that was installed three months ago. The floor was not properly levelled. One of the floorboards has now cracked, and there are three small areas where the floor is particularly not level and I fear more cracking. I would like to, if I can, level these sections without changing the entire floor.

1. Move wahing machine, fridge and table in order to lay vinyl flooring

I need vinyl to match the grey laminate flooring done in the passage. You can use off cuts I don’t mind as long as it is done neatly. You would need to provide the vinyl flooring. The area will be cleared and prepped of course. Thank you

Small bathroom floor area - 200 cm by 140 cm, need to install vinyl sheet. Adhesive and sheet provided.

Lay bathroom vinyl flooring 2x3 meter roll

Install of 18.5 sq m of vinyl plank flooring - https://www.floorsforpaws.com/pawsafe/pawsafe-domestic-range (Coco style) on 5th March Flooring plywood is already in place and all flooring substrates required (screenshot) are on site, instructions from supplier on method of install: A lot of our fitters use  Ardex feather finish to ensure then don’t ghost through over time. Apply once in plyboard joins, allow to dry and then apply again to ensure the joins are completely level with the plyboard. The planks/tiles can be cut with a Stanley knife (hook or straight blade).  Follow the instructions on the adhesive, you need a A2 Trowel you need the trowel at 60 degrees, apply a thin layer, butt each tile up to the others Use a P131 primer over the plyboard and when dry use FBall F48 adhesive to adhere the planks. The PawSafe domestic flooring needs to be laid into wet acrylic adhesive.  Do not let the adhesive go tacky.

Hi, I need a floor fitter/ vinyl layer to lay some sheet vinyl flooring in my bathroom. (Please only offer woth experience) Im a tradesmen myself, just flooring is not my area! Existing flooring is vinyl, laying straight ontop with 4mm loose lay vinyl. Ideally need done Saturday 25th. I have the flooring. Thanks