Find a local heated floor installer near you

I suspect there is something wrong with my underfloor heating as it doesn’t get warm enough. If someone knows about the control valves I think they’re showing an error.

Downstairs heating is only underfloor. Seems like a technical issue as upstairs heating is working

Install 6 sq m electrical underfloor heating mesh on 2 rooms. Carpet install and removal to be done by owner.

Hot water from the Ecodan works for water (shower, taps) but for some reason, no heating coming out of the underfloor heating. The pump flow looks like it is working. Room thermostats are working. But- pipes not hot, control system seems stuck on standby for calling heat from the boiler. Could be a need to replace or rewire the motorised valve actuator. Maybe be something to do with the boiler. Maybe something simpler and I’m being slow. Need a heat-pump heating engineer or plumber-electrician. Suggested price for call-out, first 1.5 hrs, diagnostic and simple fixes. Let me know if you can bring spares, and what additional costs may be. We will reconcile after.

Quote for prep floor, lay insulation boards, lay electric under floor heating, cover with self leveling compound, lay LVT click system In Hall and Kitchen approximately 15.5 square meters of LVT and about 13.5 square meters of underfloor heating .

I’m considering underfloor heating. The room is 25m2. I’m looking for who can lay it and install, connect it in the most cost effecting way.

Not all the manifolds seem to be working. So some rooms are cold.

Underfloor heating is not working in certain rooms

Floor heating in one of the rooms doesn't work while the others are fine.

Our boiler is working fine. But the underfloor heating is a little patchy in some of the rooms. We would like someone with experience of such systems to help us bleed it and make it more effective.

​I need an experienced heating engineer to install and commission a Heatmiser control system for my underfloor heating in Pinner. The new boiler and UFH pipes are already in place. ​The job involves: ​Installing and wiring 2x Heatmiser RF controllers. ​Connecting them to a combi boiler and two manifolds (a 7-port and a 2-port). ​Setting up 6 thermostats for 6 zones. ​Linking everything to the Heatmiser Hub for mobile app control. ​You MUST have proven, direct experience with Heatmiser RF systems.

I’m looking for a skilled electrician to install underfloor heating in my property. The job includes: Priming the concrete floor Installing XPS insulation boards Laying down the underfloor heating mat Making all necessary electrical connections This is a complete underfloor heating setup from prep to connections, and no screeding will be required. The job needs to be done today or tomorrow. Please get in touch ASAP if you're available or can recommend someone who is.

Looking for someone to connect under flow heating to power outlet

We currently have two Heatmiser Neostat v2 thermostats installed in our home, along with an RF Switch v2 and a UH8-RF v2. One of the thermostats is used to control our radiators, while the other manages the underfloor heating system. We’ve been having ongoing difficulties getting either thermostat to consistently switch the heating systems on or off. We’ve tried resetting and re-pairing both systems several times. While they may initially appear to function correctly for a short period, the thermostats inevitably stop communicating with the RF Switch and UH8-RF devices. At first, we suspected that the issue might be linked to our old boiler (which was over 20 years old), but having replaced the boiler, the issue remains unresolved. We also attempted to relocate the thermostats closer to the RF units to improve signal strength, but this has made no difference. To date, two separate boiler engineers have tried to diagnose the issue, but neither has been able to identify the root cause or offer a solution.

I need experienced professionals to install electric under floor heating to the passage (approx.15m2), kitchen (15m2) and shower (2m2) room floors. The sub-base is 18mm ply. The build up is 6mm Jackoboard, DCM-Pro mat (peel and stick), warm-up DCM-pro cable on 100mm self-smoothing compound. 3 thermostats

I need an electrician to connect my underfloor heating. The wall has already been chased so need someone to get the connections going before the laminate fitter fits the laminate.

To remove old laminate flooring and put under floor heating followed by new LVT herringbone laminate floor in living room 21 square metre.

We need the underfloor heating zones to be tested with each room thermostat. There are 2-3 zones which seem to be mapped to the wrong thermostat so zones have to be tested one by one and mapped correctly.

I need someone to install underfloor heating and laminate flooring. The room size is 9sqm. Im happy to pay £350

Require floor screed for underfloor heating to level floor before laying vinyl tiles