Hire trusted experts for dishwasher repairs in South London

Integrated dishwasher installation with some woodwork needed

Dishwasher outlet is connected to sink outlet. Somehow, water drained from sink is going into DW. Urgent plumber required

Connect the water pipe to the inlet valve and the waste pipe.

Dishwasher isn’t draining, filters have been cleaned, it’s an F12 error. It might be the pump so a I’d obviously pay separately for any parts needed

Integrated dishwasher not working. Plug appears to be behind it. Need to get behind it to see if it can be fixed without replacing. If it can be fixed, would need it putting back in.

Washing machine hose at the back I cannot take off. Cooker hood needs to be drilled to wall. I have a table top dishwasher a hole needs to be drilled through work surface and plumb in

my dishwasher is blocked, i suspect it's the salt we've put in it to clean it

To replace dishwasher seal the new seal shall arrive on Wednesday

It needs a 2 way value under the sink because I have a washing machine connected already. I need a hole drilled through the cupboard to get the hose through to the sink connection and another one drilled to get the plug out the other side. It also needs to connect to the waste water

Pull washing machine out slightly to get to hoses, unplug old dishwasher, and put new dishwasher back in place.

Dishwasher with water at the bottom, we removed the water and try to use again and the same happened. Not draining properly . We checked the pipes and they are ok, not blocked. AEG dishwasher

Fix a shower hot tap that won’t fully tighten (I think the seal has gone inside?) when I tighten it fully it slips to be loose again. Attach the waste pipe from the dishwasher to the waste pipe under the sink. It just needs some sort of connector but unsure what that is. The main waste pipe from the sink is a littler narrower I think than normal. (The existing nozzle for a waste pipe in the sink trap is used by the waste / overflow from the boiler.) Photos provided.

We had a new dishwasher installed in the winter. The man who installed said he needed to cut the door as when opened, it was hitting the plinth at the bottom and not opening fully. It seems like on our old model that we had a ‘sliding hinge’ fitted to the panel so that it fully opened. This was an Ikea fully fitted kitchen. He cut the panel from the front of the door but it now has a large gap on the base. We’d like a new panel fitting to dishwasher with a sliding hinge please.

Looking for a kitchen fitter to fix the loose screw of my integrated dishwasher door. The dishwasher itself works perfectly, the cabinet door attached to it has loose screws that need securing

Uninstalling my integrated dishwasher

To uninstall a dishwasher

Fit door of cabinet back in- original screw hole is now too big New dishwasher means that kickboard needs to be cut and resized slightly to fit flush

The oven (smeg) is only working on full heat and the fan is very noisy The dishwasher deal needs replacing

Dishwasher repair - not sure what is wrong with it. Making a weird grinding sound

Rebooking task between Garfield and Michael