Find a professional verandah installer in Melbourne

I require a registered draftsperson to draw up existing conditions and overlay plans for a new steel garage and verandah I'm getting built in the MVCC area in Vic. I require these drawings for obtaining a building permit approval from a surveyor. I have scaled site plans and engineering plans for both the garage and verandah. At the moment I'm unaware of what extra level of detail the surveyor may need (neighbors setbacks or elevations etc) so if you have experience in this and can offer advice, that would be advantageous.

My dad has an issue with his verandah. . The gutter has unclipped from the beam , and the beam has rotted in one section. Seeking repair of beam and reinstall gutters

I am looking for a qualified carpenter to replace the four verandah posts on our Victorian house. The posts will need to be replaced with heritage-appropriate decorative timber posts. Some of the horizontal bars may need to be replaced at the same time. We will have the (possible) asbestos eaves removed prior to the job commencing I have listed the price at $10 because the system wouldn't let me put $0 and I'm not sure what this will cost but am obviously willing to pay a fair price.

Wanting a architect or engineer to draw up a decking and verandah project to be able to obtain permit.

I need a building surveyor to provide a building permit for a small deck (porch) and front verandah. We have architectural drawings and are in the process of obtaining structural engineering and fire engineering documentation.

Replace timber verandah floor

The facia board needs painting about 5 to 6 meters the green section

My front verandah is textured concrete, has previously been painted but has flaked. It's been pressure cleaned and needs painting. I have bought the paint.

Steel verandah to be pulled down and recycled. Held up with steel c beams and corrugated iron roof. Pull down and takeaway. All proceeds from recycling steel beams etc kept by you.

Piece of wood on verandah ceiling is loose, needs to be nailed back on, and a paver on front door steps had broken and needs to be cemented back on, both jobs easy.

We are looking for an experienced carpenter or handyman to repair and restore the front verandah at a property we manage in Ascot Vale. The verandah has significant issues that need addressing, including a top rail that has completely detached from one of the posts and several areas showing serious wood rot and water damage. As shown in the attached photos, the timber in some sections is badly deteriorated. The job will involve a full assessment of the damage, recommending and carrying out necessary repairs or timber replacements, securely reattaching or replacing the detached rail, and treating all affected areas to prevent future water damage. We will also need the repaired sections prepped and painted to match the existing finish for a neat and cohesive look. Preferably prior experience with verandah or timber restoration. Timing is flexible, but ideally we would like the work completed within the next one to two weeks. Please provide a rough quote & let us know if you would like to inspect the site. Budget to be determined based on your assessment i.e. fix versus replacement.

I need to cover an exposed verandah, small area (townhouse courtyard). The tarp currently pools water so I need someone with experience who can cover the area so this doesn't happen, or advise a better solution.

1. Repair (e.g. fix nail pops) of verandah deck, which is roughly 8sqm. 2. Preparation and cleaning inc. pressure wash and clean/scrub (product supplied) and tape off to protect any areas. 3. Sand, noting that nails are raised dome head. 4. Apply 2 coats of oil (provided) 5. Sand and stain front door step (pictured). Tasker to provide necessary equipment. 6. Paid separately on site, for rear deck of same size.

Cleaning porch of cobwebs and mopping tiles; cleaning front fence and floor of garage and driveway

Tiling verandah and fireplace

Front porch verandah. Two decorative posts to be replaced. Posts and post supports supplied.

Installation of 6x downlights in new verandah (Solarspan 50mm insulated panels) Requirements are: 1) Installation of downlights while the builder is adding the insulated panels from 10am on 27th Feb - work with the builder to cut holes in the panels and run the low voltage cables 2) Remove the existing spotlight and connect the downlight cables to the main power supply 3) Replace/install new lightswitch with dimmer The downlights will need to be provided (let me know if the price is included in the quote or not) - these are the official lights but alternatives acceptable https://solarspan.com.au/patios-pergolas/products-roofing-options/accessories-led-downlights Images attached: 1) This is the area where the new verandah is being installed (6.7m L x 3.2m W) - the spotlight in the middle can be removed and used as the connection to the main power supply 2) This is the current lightswitch for the exterior spotlight 3) This is an example of what the completed verandah will look like

There is one other post to would need to match or be similar.

Replace or repair timber verandah post

65.2 square metres of wooden deck in three sections. Clean and prepare surfaces for oiling. 2 coats of oil required. Nb Trades person needs to have cover sheets to protect freshly oiled deck in case of rain.