Find a professional balustrading contractor in VIC

Rotted wood on part of balustrade needs to be repaired (rotted timber replaced)

Would like a quote on restoring the balustrade Also, how long will it take.

The safety wall on my balcony needs to be extended. I need a carpenter to frame and extend the height on the existing wall, making it ready for renderer to complete the remaining work. Total length of wall 19 metres Current height : 50cm Once completed : 1.3m

Remove and replace timber balustrades on front porch, then paint. 5m x 2m. Also replace two front timber steps.

I need two balustrades and one handrail fabricated in 10mm x 40mm steel. Please see photos attached. Can be completed in your own space and picked up.

Hi, we have two 40ft containers that need full external preparation and painting. These will be regularly transported and used at outdoor events, so we need a durable, professional finish that can withstand weather, transport and handling. For both containers, we require: * Full clean and preparation of all external surfaces * Removal of loose/flaking paint, rust and corrosion * Sanding/keying as required for proper adhesion * Rust treatment/inhibitor to all affected areas * Appropriate primer for galvanised/steel surfaces and exposed metal * Two finish coats of a durable exterior metal paint * Touch-ups/additional preparation as required for a consistent finish We also have external stairs with steel and timber balustrades that we would ideally like included. These are older/weathered and will need proper preparation rather than simply painting over the existing finish. For the stairs: * Steel cleaned back with rust/corrosion removed and treated * Appropriate galvanised/metal primer and durable exterior topcoat * Timber cleaned/sanded, damaged areas addressed, primed and painted with an exterior-grade system * Stair treads prepared and finished with a hard-wearing, non-slip coating suitable for high foot traffic and outdoor exposure The priority is durability. We want the correct preparation, rust treatment and primer system to minimise chipping, peeling and rust returning, particularly on the stairs, edges and high-contact areas. Could you please confirm: * Whether you can complete both the containers and stairs * What paint/preparation system and products you recommend * How many days you would need to complete the works * Drying/curing time before the containers can be transported and stairs handled/used Importantly, we need all works completed by 1 September, with enough curing time for the containers to be transported shortly after.

Polish glazing scratch for kitchen window and Void glass Balustrade. Open to offers.

Need balustrade where I have marked red and need handrails where marked blue. See pics Yes , to give you an idea. There are 16 steps in total and the landing 300 mm. So handrail length required = approx 10 m Balustrade length = 8 m I will supply all parts. I just need someone to install for me

I have installed my floating stair case steel frame I need wooden treads with led strip at the bottom of the tread and glass balustrade.

Glass balustrade Around 9 meters to be installed on void and balcony

Need someone to repair the stainless-steel wire balustrade around our deck. One of the horizontal stainless-steel cables has come loose/disconnected from the post, as shown in the photo. Job includes: Reconnect and correctly tension the loose cable Check the fittings/anchors and replace any damaged parts if required

I need a light switch secured to a bedroom wall as well as a balustrade that needs securing to a wall. Please see pictures attached

Balustrade repairs, reinstate upright wooden pieces

Front veranda approx 1 and 1/2 meteres across, then another same to break for steps then approx 75mm to wall. 5 steps about 1 metre from edge and about 75mm height. Rear - continuous approx 2 metres leading to top of steps. 3 small steps approx 75mm in length and height about 50-60 mm. In hospital at the moment for 2 weeks so no photos available at the moment. Will resubmit when home.

I have 1.8M high balcony Louvres that I would like to replace with 1M high aluminum balusters. The area size is 3.70M X 4.87M

Hi, I would like to get a quote for replacing an indoor short wall (2400 mm in total length and standadr height) Galss and timber balustrade. the image below shows the existing condition of the wall, and following image shows the artistic view of the intended product. the length of the balustrade is indicated on the existing images.

I’m looking for an experienced tradesperson to install a stainless steel wire (cable) balustrade on my internal staircase. Holes are already drilled and aligned

We need glass created and installed by an experienced glazier to the top window above our front door and to the balustrade next to the set of stairs that takes you to the rooftop of our house. Window measurements 880mm by 345mm Balustrade measurements 1750mm by 1750mm triangle