Find a professional tiler in QLD

I have 18.9M2 of Alfresco floor to be tiled at my house. I have 600 X 600 tiles in place. Just the labour

Four bedrooms need to be titled, can you provide samples of the tiles and colours so we can choose, and also will you be able to take away the old carpets. Can you come out and meet us to discuss further?

Ensuite floor is bare cement and needs tiles laid, have the new tiles

Ensuite is empty and needs new tiles installed

Some floor tiles have lifted

Tiling entry and two steps. 600x600 tiles and L shaped trim angle supplied. Old paint might need a light grind. Approx 3.5 Sq M

Waterproofing where needed plus Tiling to kitchen, laundry and bathroom, hallway plus part dining and to the front door. Floors — Johnson 400×400 Cemento white matt · Kitchen approx. 16m² (under review, may reduce) · Bathroom approx. 13m² · Laundry approx. 10m² · Hallway & Dining approx. 30m² Walls — Johnson 300×200 Ultra white ripple · Bathroom approx. 26m² including shower recess · Kitchen splashback approx. 4m² · Laundry approx. 1.5m² All tiles supplied by owner and already on site. Please confirm whether adhesive, grout and silicone are included in your price or supplied by us. Waterproofing to bathroom and laundry, if possible (if not it will need to be done by a separate licensed contractor), with certificate and flood test completed (if possible - not critical for flood test) before you start those rooms. The kitchen needs no membrane, just laundry and bathroom. Property is vacant from 17 September — full access, no occupants, no restricted hours. Work runs as three legs in sequence, approx. 12 working days: · Kitchen, Hallway & Dining — from Fri 18 September · Laundry — from Wed 23 September · Bathroom — from Mon 28 September · Silicone and seal — Wed 7 October Only break in the run is the King's Birthday public holiday, Monday 5 October. Let me know what suits.

I’m looking for an experienced tiler to lay new porcelain floor tiles directly over the existing mosaic bathroom floor tiles. The bathroom floor area is less than 10 m². The existing floor tiles are sound and reasonably flat. I would like to avoid removing the existing tiles if possible, so I’m specifically looking for someone experienced in tiling over existing tiles. Work required: * Inspect existing tiles and confirm they are suitable for tiling over * Prepare and clean the existing tiled surface * Apply appropriate primer/adhesive for tiling over existing tiles * Supply and install new porcelain floor tiles * Grout the new tiles * Silicone/seal around appropriate edges and fixtures * Leave the bathroom clean and tidy Tiles: I can supply the new tiles? Area: Less than 10 m² Location: Clayfield I have attached photos showing: 1. The existing bathroom floor 2. The preferred light-grey porcelain tile look 3. A visual example of the proposed result I am looking for a neat, professional finish and someone with demonstrated experience laying tiles over existing tiles. Please provide your labour price and advise whether your quote includes primer, adhesive, grout and silicone. I’m happy to discuss the job and arrange an inspection

removal of carpets and tiling of bedrooms downstairs and living room

Tiles damaged need replacing

Laying tiles throughout the house except bedrooms, laundry and bathrooms.

I need 40 sq metres of floor tiles but not in 1 large space but in 4 small spaces - kitchen, bathroom, laundry , and entryway. I am disabled and the current tiles are very slippery i am replacing them with matt tiles I have already bought the tiles they are 600 by 600

Looking to get this job done in the next 2 weeks - replacing the carpet in a small room measuring approx. 3.20 m × 4.00 m with 600 mm × 600 mm floor tiles. Please provide your quote including removal and disposal of the existing carpet, supply glue and grout, and laying. Floor Grout Colour: 110 Keracolor Manhatten 2000 (grey) Laying Pattern: Straight Lay Thank you

Floor tiling of salon floor. I have tiles from Bunnings that I would like to use. The space is about 70m2

Looking for tiler to overlaying tiles on top of existing one , current tile in very good condition, no cracks, I have bought the tiles 600 by 600 porcelain from national tiles. Area is 66sqm, living Rooms, entry, kitchen and bathroom. No need for waterproofing. Please quote of you laber plus material , grout...per square metre Area varsity lakes.

Looking for an experienced flooring installer to install new flooring over an existing timber floor. Details: * Existing timber floor is already exposed (see photos). * I do not want the floor removed. * Looking to install hybrid flooring or vinyl planks directly over the existing surface if suitable. * Small room area. * Installer to advise if any floor preparation or levelling is required. Please provide: * Labour-only quote. * Supply-and-install quote (optional). * Estimated completion time. Requirements: * Flooring installation experience. * Own tools. * Previous flooring photos preferred. Location: Boggabilla, NSW.

Bathroom vanity replaced and need make good works around the vanity and titling over existing floor tiles in the bathroom floor. Both wall and floor tiles are outdated and can't find replacements. With the wall and floor area around the vanity, looking for workable solutions.

Lay approx 30.0 m2 (approx 117 pieces) Porcelain Tiles 600mm x 400mm x 20mm Tiles to concrete screed for Patio and Garden area. The Job includes a 16.0 LM of 600mm x 200mm x 20mm Border Tile (approx. 24 pieces cut in half)

I need 12 square metre of tiles laid on concrete 600 x 600, floor already primed. Tiles, clips, spacers and glue supplied. Would really like to get the job done Tuesday afternoon 4 pm if possible. Just need a good tiler, other work in futere in the pipe line. Thank you

The shower wall and bathroom floor have been waterproofed and prepped. Need tiling in shower and basin splash back. Install shower screen, replace toilet, install bench, basin and all tap wear. I am supplying materials.

Looking for someone to repair and rewire two large porcelain lamps, including supplying and fitting all required lamp holders, wiring and electrical components.

Tiling job - I have a kitchen splashback area (never tiled before) 145.6 x 60 cm approx. I have 2x 120 x 60 x0.8 porcelain tiles and 1× 60 x 30 cm tile. I would like to place one large tile centrally in splashback with 13cm approx pieces on either side. No power points.

Tiling of shower floor, 900*1000, over existing tiles, excluding hob, maybe using 600*600 porcelain tiles in Carrara

.We are laying the tiles around our pool. The fence spigots are in place. We are needing 9 x holes to be cut into 9 tiles and then glued in place over the spigots. 5 x tiles to be cut on an angle. Tiles are porceline 600 x 400 x 20. Happy for an hourly rate or fixed price. The tiler who had done the coping tiles advised us it took him 3 hours to drill 15 glued tiles including the concrete core holes. No core drilling, it is loose tiles that require cutting and holes.

20sqm outdoor porcelain tiles. Concrete slab in good condition. Need complete installation including: - surface preparation - adhesive - laying - cuts - grout - silicone joints - clean up Tiles supplied by owner. Please quote labour including all consumables except tiles.

Thank you all for taking the time to quote. We have now engaged another contractor for this job with Hipages ######### Need remaining floor tiles removed from one room approximately 3.6m x 3.8m (13.7m²). * 600 x 600 porcelain tiles * Approximately 4 tiles already removed * Around 30-35 tiles remaining * Remove and dispose of all tiles and debris * Scrape/remove tile adhesive from concrete slab * Floor is being prepared for carpet installation * Easy access to room * Husband started the job but is unable to finish due to injury Please provide your own tools and include disposal costs in your quote.

Need approx 47m² of porcelain tiles laid around pool.

Shower has a porcelain shelf which has smashed but still attached to one of the tiles. Looking for someone to fix the tiles and attach another shelf

I need someone to help me remove the fine scratches from the glossy tiles. I have the required products just need someone to apply correctly. Approximately 50m2 area to be covered. It’s mainly in the hallway.

Need 12 porcelain tiles cut to fit to fill in gaps in our partly completed kitchen splashback, as we don’t have a tile cutter ( and would prefer not to buy one for this small job). Tiles are of course, supplied, and just need cutting to specific dimensions.

i have a family porcelain horse that has been in the family forever. its not worth anything but i would like it put back together and then painted gold

I'm having a bidet toilet seat installed. The water supply is inside the cistern and I need a hole in the side which will allow for a hose to pass through.

Hello! I need 1 porcelain tile cut and then replaced for an existing damaged tile and then installed in kitchen. We have the replacement tile but they are the larger square size, so will need to be cut. Please see photos for size of complete tiles and how it needs to be cut Job is in Runaway Bay in apartment (underground parking, however up 2 flights of stairs). Can come collect tile and cut offsite if you need

42 x 20mm 600x600 porcelain tiles cut (appx) in half using wet saw. Around the Tweed Heads/Colangatta area.

Installation of 2 x Daytona Round 6 Bar Heated Towel Rail on Porcelain Tiles in main bathroom and ensuite bathroom.

600x600mm whitish floor tiles. 3mm joints. We have 6 spare tiles. Kitchen area.

I have a crack on a porcelain wall that I would like to obscure by airbrushing a natural vein similar to other veins located on the same panel refer to your mage attached. The porcelain has a shiny gloss finish which I would like to maintain.

I need 14 stainless flanged spigot holes drilled into tiled balcony for me to fix off. I can’t have cracked tiles, there is 4 holes per baseplate and they will all be marked out ready

Install Billi tap and cut whole through porcelain top

The porcelain soap holder broke inside the shower box, and I need to have it removed.

Hoping to get this splashback tiled. Don’t mind if you tile over the tiles. Just want them laid vertically.

Tiler Needed – Kitchen Splashback – Paddington Looking for an experienced tiler to install a new kitchen splashback in Paddington. We have already purchased the grey tiles and grey grout. Job includes: * Installation of kitchen splashback tiles * Cutting around power points and fittings * Grouting * Silicone/seal edges as required * Neat, professional finish and clean-up Wall is ready for tiling. Please supply suitable adhesive and any other standard installation materials required. Please include your experience, photos of similar splashback work, availability and quote. Thanks!

Kitchen splashback. Repeat as per last task request but having trouble updating. Materials exist but 600x300mm and will need cutting. Up to 10m2 of splashback tiling. Kitchen and laundry. Clear wall. Experienced tiler needed

Kitchen Splashback Tiling – Large Format Tiles & Wall Prep Required (in Clayfield, Brisbane) Looking for a licensed, experienced tiler to prepare and tile a kitchen splashback. • Corner w/ Two walls. Wall A is 2m x 61cm (butts to pantry). Wall B is 3.1m x 61cm (ends at fridge gap). Total area ~3.1m². • Large format stone-look tiles (1.2m x 60cm), laid horizontally. I have laid out a few of the tiles in the final photos to show the tiles you'll be working with.  • The kitchen is double-brick. The internal corner is out of square; Wall A tapers from 0mm at the pantry to an 17mm gap in the corner. The walls need to be rendered flat/square and feathered along the 3.1m wall before tiling. • 2 power points on the 3.1m wall (7cm up from bench) requiring internal window cuts. Wires will be safely isolated/disconnected prior to your start. • Square-edge brushed metal trim at the fridge end, light grey grout, and colour-matched silicone. Please quote for labour, render materials, glues, grout, and trim (I will supply the tiles). Please show photos of previous large-format tile work.

We need someone to tile our splashback of approx 0.9m2 with 125x125 mm tiles. We have already removed the previous laminate splashback. The new tiles will go onto the VJ board wall. Tiles seen in the photo are just propped up to get an idea of what they will look like

Tile kitchen splashback, materials supplied

Grout splashback - 2 areas - appx 3m2. And silicon seal around benchtop.

Office lunch room kitchenette sink area need tiling. Installation only. Will provide the tiles. Flexible on dates. Area is about 1.5 x 1 max.

Area of approximately 5.1 m2 Kitchen and laundry current splashbacks to be removed and new tiles purchased to be laid.

Tile benchtop with Abi tiles (already purchased) and splash back. Don’t yet have grout or glue.

300x600 tiled splash back. About 3mtrs

The current splashback is 292cm X 300cm X 86cm. The height of the tile splashback is 30cm. What I need it a tiler to come in, rip out the old tiles and replace with new ones. Obviously would have to also temporarily work around and cut holes in the tiles for the electrical outlets. Would need them drilled back into the wall at the end of the job so it all looks nice and functional. I can supply tiles, just 30x60cm white gloss ceramic tiles from Bunnings.

75x300mm subway tiles to be install on two walls one of approx 1800mmx 570 and the other 3000mm x 570mm. plus a small one of approx 600x 570mm. please submit quotes

Looking for a tiler to tile my kitchen splashback. Tiles to go to rangehood/overhead cupboards on one side of the kitchen and 3x rows over the sink on the other. Tiles are 100x100 and will be provided. Availability for Thursday or Friday this week.

Is there an [EXPERIENCED] tiler who could give me a quote for a splashback installation ? SPLASHBACK SIZE : HEIGHT : 58 cm WIDTH /LENGTH : 425cm There are three electrical panels that will need to be cut around. (one light switch, one phone line/internet and one power). Tiles are 150 x 150 in dimensions but handmade and have character so they're not all identical. I have used these tiles in the bathroom and understand the spacing may not be all even - and I do not care, so long as they're side by side and not going to drop off the wall. I do not have grout. (used a brown Havana grout in the bathroom so I'd like to stick with brown- but if grouting is not possible, I can look at sourcing such elsewhere) I do not have tools or supplies - only the tiles and tiles will need to be CUT around the electrical panels. The old splashback was pulled off. Again. I only have the tiles. Looking for experienced tilers only with the correct equipment and knowledge to get started. Looking to begin this job in the next week or ASAP /when available. Thank you for your time :) The tiles used are : https://tilelane.com.au/products/havana-emerald-green-150x150-hand-made-gloss-tile

Tiler required for Landry splashback and need to tile a door runner that’s been removed. Splashback is a subway tile 200mm x 50mm and floor tile is using existing tiles which need to be cut to fit. No grouting required We have 2 litres of glue

Kitchen splashback tiling job - tiling over existing tiles (no removal required). Two sections: • 9ft x 2 ft • 8 ft x 2 ft (with window cutout reducing area All tiles supplied. Looking for someone to supply adhesive suitable for tiling over existing glazed tiles, lay and grout. Straightforward job for an experienced tiler. Located in Southport, Gold Coast. Please include adhesive and grout in your quote. Happy to discuss further - photos available.

Install 3–4 IKEA LYSEKIL splashback panels in the kitchen, including cutting around four powerpoints, removing and remounting the faceplates, and applying silicone along the benchtop edge. Must bring all required tools, including adhesive (e.g. liquid nails) and silicone.

*Re-advertising* Looking for an experienced tiler to complete a small job the week starting 04/05 (pending completion of kitchen install). Scope: - 2m² toilet floor (tiles are 200x200mm) - 3m² kitchen splashback (tiles are 100x100mm) Details: - Tiles supplied - Standard straight lay (no complex patterns) - toilet floor is currently hardwood so would need you to provide primer, underlay board, waterproofing etc to ensure it meets building standards. Please include: - Your quote for labour and all required materials - Availability the week starting 04/05 - Examples of similar work. Looking for a neat, professional finish. Thank you!

Requesting for a quotation for tiling of kitchen splash back. Approx total 3.70 - 4.5 SQM. Will be using 600x600 tiles. Will send exact measurements and tiles measurements once completed. Location is in Indooroopilly.

Tile and waterproof bathroom

Small bathroom Roman bath and walls

25mm masonry bit went through bathroom tile

A plumber will be leaving about 2 smallish holes in the walls that are plaster only. He will also be leaving a hole in the bathroom in a small tiled area so we may need a small amount of water proofing and tiling in that area too. He will be doing the work on Tuesday the 6th of October so I don’t have pictures of the holes yet. I have provided a picture of the tiled area that will have to be repaired behind this mixer.

Bathroom tiling including skirt and shower $60 per hour or neg on rate

Tile installation for Bathrooms with 600x600 tiles. Tiles provided. You will provide your glue, grout and tile trims. Dimension: Lenght 2.9m Width 1.9 Height 2.1m Niche required 100mm square Tile insert floor drain

Unit bathroom, Windsor QLD. OCTOBER 2026 after strip-out; dates flexible. QBCC-licensed, insured contractor required for bedding/screed, waterproofing, TILING and certificate. TILES SUPPLIED BY US. Include labour and materials: bedding/screed, tile glue/adhesive, grout, waterproofing system, edge trims, silicone and WATERSTOP separating the shower wet area, integrated with the membrane. Include preparation, cutting/laying and clean-up. TILE HEIGHTS: full-height plain matt white wall tiles to assumed 2.5m ceiling ONLY in wet/shower areas and above vanity. TILE SKIRTING ONLY to remaining walls (skirting height to be agreed). Concrete-look floor tiles throughout. Waterproofing extent must suit the system, not just tile coverage. KNOWN FAILURE: reported near bath drain, leaking to floor below and through retained toilet partition. Inspect substrate/drain and coordinate plumbing checks before covering. Itemise repairs/exclusions. Include substrate preparation/minor making-good (define allowance), new bedding with falls to wastes and compatible waterproofing. Detail junctions/upturns, partition, wall return, penetrations, drain flanges, waterstop and doorway. Specify bedding/membrane sequence, drying/curing and testing; provide stage photos. Include signed waterproofing compliance/installation certificate, licence details, product records/warranty and applicable QLD aspect certification. State certificate for this unit. Dims mm: room 3480 long, 1660 entry width widening via 300 return to 1960; floor approx 6.4m² before partition deductions. Ceiling assumed 2500. Shower approx 1700 x 1050; 750 beside return; 1190 partition to step. Retain slab, masonry, partition and services. Verify on site. 4 images: existing photo, floor plan, shower detail, proposed render (concept only). Offer itemised price, licence/insurance, October availability/duration. Fixtures, plumbing repairs and repairs below separate unless itemised.

Remove architrave around window and tile around window and inside window and grouting and silicon in laundry area

Man these are hard to remove, had a go. Need professionals on the job. About 15m2 left (at the most), some floor and mostly floor tiles. Also some gybrock. Need to clean and put rubbish in a heap at the back which is getting collected on Sat 26th. You can work on a Sat or Sun. No issues. Need to close some old floor holes top and bottom for tiler preparation as well.

Need bathroom tiled. There's only one window reveal and the toilet floor in the neighbouring room

This job is about tiling a rumpus room and its ensuite bathroom. For the rumpus room, the floor should be tiled, while for the bathroom, the floor and wall (full height) are to be tiled. I have the tiles: 600x600x9mm rectified porcelain tiles for the floor and most of the bathroom wall. One wall of the bathroom will have different tile: 600x300x9mm rectified tiles. The bathroom requires waterproofing. Feel free to quote the waterproofing if you can do such activity. The job is to start 12 Oct or later.

We have a tile in bathroom that has come loose and off near bath. We are seeking someone who can glue it back on and grout for sealing - photo is of section tile has come off. I can send a pic of the tile if needed too.

Experienced Bathroom Tiler Required – Ensuite Rectification & Retiling I am looking for an experienced, licensed bathroom tiler to rectify and completely re-tile 2 small ensuites. The existing tiling was completed poorly and needs to be demolished/removed and redone correctly so the bathrooms can meet compliance requirements. I want someone experienced in bathroom rectification work who understands Australian bathroom waterproofing, shower waterstops and falls, and is comfortable working from compliance requirements. Scope of work Waterproofing / compliance We have been advised that the existing bathroom work has compliance issues, so the tiling needs to be treated as a proper rectification job rather than simply covering/replacing the existing tiles. The waterproofing can be provided/arranged by us. Waterstop is specifically required in the shower areas. The tiler must be familiar with the requirements for waterproofing transitions, shower thresholds, floor/wall junctions and waterstops and must coordinate with the waterproofing work so the finished bathrooms can pass compliance. Tiles supplied by us The wall tile we have been looking at is a Bunnings DuraTile-style 300 × 600 mm wall tile. We are allowing approximately: * 20 m² of wall tiling per ensuite * 3 m² of floor tiling per ensuite * Therefore approximately 40 m² total wall tile * Approximately 6 m² total floor tile We will provide the actual tiles to the successful tiler.

Two bathroom floors and walls resurfaced Kitchen splash back resurfaced

Require a handyman with ABN to: Replace kitchen tap Secure loose wall tiles around bath and vanity kickboard Refer pics

Two small sized bathrooms needing tile re-grout

Around 6-7 tiles on the bathroom floor need to replaced. Tasker needs to source matching tiles. Please provide quotes including labour and materials.

Tiled bathroom floor painted white

Bathroom has been painted with new shower installed Just needs the silicone around floor edges of tiles, sink and shower to be done. And a shower head/taps to install.

Looking for a qualified tiler to tile a small bathroom. * Approx. 5m² of floor tiles – 600 x 600mm * Approx. 10m² of wall tiles – 300 x 600mm * Floor will need to be screeded to falls and water proofing membrane applied * Remaining walls are VJ board, so no tiling required * Bathroom will be fully prepped and ready to tile by the end of next week * Tiles will be supplied * Very easy and straightforward job Looking for someone who does a neat, quality job.