Find a professional tiler in NSW

Looking for a quote to tile over existing floor tiles (2.5sqm) and remove and replace 5 wall tiles. More detail shown in the attached images. Looking for an experienced tiler to complete two jobs in my bathroom: Wall tile repair – Remove and replace a few damaged wall tiles without disturbing the waterproof membrane underneath Floor tile overlay – Tile over the existing floor tiles with new tiles (https://tilecloud.com.au/products/seaforth-travertine-look-beige-matt-1) Scope of work - Carefully remove tiles for towel rail, roll holder, soap holder. - Inspect area to ensure waterproofing is intact - Clean and prep the substrate - Install replacement tiles to match existing layout - Grout and finish Floor tiles (tiling over existing tiles) - Prep existing floor tiles for bonding (clean, degrease, lightly sand/scuff glazed surface) - Apply suitable primer/bonding agent for tile-on-tile adhesion - Lay new floor tiles using flexible tile adhesive rated for tile-over-tile - Grout and seal as needed - Ensure transitions to door threshold and fixtures are neat All tiles provided but if you are able to source an exact colour match for the wall tiles that is a bonus!

I have 4 bathroom floors to tile but starting with a small toilet first. Each room needs all trades to complete before we can start on the next. In this toilet room the new tiles will be laid over the old ones. We will have a cement or wood ramp fashioned outsite the door under the carpet to overcome the new height step up. This room is 1.5 x 1 metre. We are not taking up the tiles because its a 70's house with asbestos walls and floor substrate.The floor tiles in this room are in good condition, no loose tiles. So the suggested budget is just for this small space.

Floor tiling in house as attached - areas highlighted - the property is currently being renovated. Approx 91 square metres for the main floor area + toilet, Bathroom & Laundry. We will supply the tiles, either a timber look tile, or a 600x600 porcelain tile. Depending on the cost we may consider some wall tiles in the bathroom area as well. Thanks

27sqm of floor tiling to be done. I have tiles and glue already. Must be tiler

The need more space on bathroom. So uproot the bathtub and complete the by fixing floor tiles and wall tiles. You buy tiles and whatever is required

It's a three-level house with 5 bedrooms and 7 bathrooms. We need to do the sand levelling, tiles and marble installation for all the bathrooms, corridors and living room areas. The project needs to start in July or August.

Tiling laundry and toilet floor over existing floor, skirt tiles to be done also I will supply tiles and pull off existing skirting tiles

Floor Tiling work. Replace nine 60x60cm tiles after some plumbing work. Great if you can get the tiles. Examples of tiles in photo attached. These tiles will be ripped out for plumbing work. The floor will be concreted again for the new tiles.

Floor tiles in shop front

Pull up carpet and tile area Approx 10sqm Already have tiles 900 x 450

Needing floor tiling installation done for small 11 sqm area see images.

Need a 3.2m2 floor + 1 row of wall area tiled. Today preferably can also be tomorrow. It’s been waterproofed and glue will be provided you will just need to cut and lay.

Tiling required for laundry area. Dimensions are approximately 1800*2500mm. Should be sloped towards the door so water can run outside. Tiles will be supplied.

Ceramic tile over existing tiles. 7m2 total area. Waterproof to shower tile floor only prior to laying new tiles.

We need an experienced tiler to lay tiles over existing tiles for our bathroom floor. We have had a tiler our previously who has confirmed this is doable. (Note: No full bathroom waterproofing required beyond localised drain integration unless otherwise agreed. We will remove the toilet.) Location: Bathroom Area: Approx. 3 m² floor area Existing condition: Existing tiled floor to remain; new tiles to be laid over 1. Preparation     •    Inspect existing tiled floor for soundness and suitability for tile-over-tile installation     •    Clean, degrease and mechanically prepare surface as required (grind/scarify if necessary)     •    Apply appropriate bonding primer suitable for tile-over-tile applications 2. Drain Modification & Installation     •    Remove existing floor waste grates     •    Modify existing PVC floor waste pipe(s) as required to suit new finished floor level     •    Supply and install new compatible floor waste body / puddle flange and adjustable riser (or equivalent compliant system)     •    Install new Elson 80 mm square brass grates, set flush with finished tile level     •    Ensure falls are maintained toward drains 3. Tiling Works     •    Supply and install suitable flexible tile adhesive     •    Lay new heritage-style mesh-mounted tiles over existing tiles (approx. 3 m²) - we will supply tiles     •    Cut tiles neatly around floor wastes and perimeter     •    Ensure correct alignment, spacing, and falls to drains 4. Grouting & Finishing     •    Grout floor tiles with suitable grout (colour to be confirmed)     •    Silicone seal perimeter junctions where floor meets walls / fixtures     •    Clean down and remove all debris from site 5. General     •    Builder/tiler to supply all labour and standard consumables     •    Owner to supply tiles and grates (unless otherwise agreed)     •    Work to be completed to a professional standard with tidy workmanship

Tiling 2 bedroom areas app 3 x 4 metres and 2 x 2 metres. other jobs TBA. Looking for quotes for hourly, daily or per metre squared rates for tilers.

We need 44 sum metre of floor tiles laid. They are 1200x600 tiles. Also need a splash back done. It’s roughly 7mx 60cm high 20x20 square tiles

I need a wall 13 square metres and floor 4 square metres retiled.

Need sand cement base for outdoor patios around 140sqm I’ll supply everything, give me your price

Approx measurements 6m porch 2.6m steps including sides 2m buffer Total 11m2 Preferably 600x400 tiles

Need a quote to hang a mirror (900 x 600mm) in a bathroom that has a porcelain tiled wall please. Here is the link to the mirror: https://www.poseidonbk.com.au/products/poseidon/mirror-2/aura-mirror-2/aura-framed-mirror/oliva-arch-yellow-gold-frame-mirror-kar6090f-bg/

I need a single straight cut on a 20mm thick porcelain paver. The Details: Material: 20mm Italian/Outdoor Porcelain (Damia brand). Task: One straight cut across a 600mm paver. Context: This is for a pedestal system next to a door, so the edge needs to be clean and chip-free. Requirement: You must have a wet saw or an angle grinder with a specific porcelain diamond blade. Location: Erskineville. Easy access in the front yard/driveway. I only have one spare paver, so I need someone confident they can make the cut without shattering it. Flexible on timing—happy for you to swing by if you're working nearby.

Need 4 Mirrors Mounted on Tiled Bathroom Walls Looking for an experienced handyman to mount 4 mirrors securely onto tiled bathroom walls. Details: - 4x mirrors to be installed in bathroom - Walls are fully tiled - Drilling into tiles required (must avoid cracking tiles) - Need clean, level alignment and professional finish Requirements: - Must have experience drilling into tiles - Must bring correct drill bits (tile/glass bits) and fixings - Prefer someone who has done similar bathroom installs Looking for a neat job with no tile damage.

New Bathroom mirror needs installing on porcelain tiles

I've tried Lithofin Intensive cleaner and Stain stop sealer, some places it's worked, others not so. Did not use mechanical scrubber. Tiles are Lappato semi polished ONLY tile professionals need apply, not a DIY or handyman - please dont waste my time or yours. thank you

! I’m looking for an experienced tiler to tile a small bathroom wall section. Wall size: approx. 73cm wide x 227cm high (Photos attached) Tiles: Supplied (same style as shown in reference photo) Grout: Supplied I’d like the tiles laid in the same staggered / random pattern as the sample. ⸻ What needs doing • Prepare wall surface (ensure clean, level, ready for tiling) • Tile the wall section neatly • Cut tiles as needed around edges/fixtures • Grout and finish cleanly • Silicone/seal edges where required • Leave area tidy afterwards ⸻ Notes • This is a small wall, but I want a high-quality finish (straight lines, even spacing, clean cuts). • Please bring your own tools. • I supply tiles + grout

Slate tile removal (optional): please quote separately Supply tiles (Optional): please quote separately Scope of Works 1️⃣ Optional – Existing Slate Tile Removal (separate price) Remove existing slate tiles from pool surrounds Dispose of all waste off-site Grind/clean slab after removal Inspect and advise on slab condition 2️⃣ Surface Preparation Grind/clean concrete substrate Remove contaminants and adhesive residue Prepare slab suitable for external waterproofing and tiling Form correct falls away from pool 3️⃣ Waterproofing Supply & apply external-grade waterproofing membrane suitable for: Outdoor use Pool surrounds Salt pool exposure Waterproof entire tiled area Turn the membrane up at walls, steps, edges, and penetrations Install in accordance with AS 3958 and manufacturer specifications Provide: Waterproofing certificate Product data sheet Installer warranty 4️⃣ Tiling Lay outdoor-rated porcelain tiles Slip rating P4 or P5 Use external-grade flexible adhesive Install movement joints and flexible sealant Neat cuts around pool edge, drains, steps, and penetrations 5️⃣ Grouting & Finishing External UV-stable grout Silicone to movement joints (colour-matched) Final clean and haze removal Seal tiles only if required by tile manufacturer Tiles Porcelain tiles only Outdoor / pool rated Size 300x300 to be confirmed (open to tiler advice for budget efficiency) Option for Tiles supplied by owner, quote saparately Requirements Proven experience with external pool surrounds Compliance with AS 3958 Waterproofing certificate required Public liability insurance Photos or references of similar work Pricing Please provide: Lump sum quote Separate line items for: Slate removal Waterproofing Supply Tiles Tiling labour Clearly state exclusions (major slab repairs, screeding, coping replacement, drainage works) Site Notes Good access Outdoor work – weather dependent Owner builder on site Looking for reliable, professional workmanship, not rushed or shortcut jobs

have replaced old toilet but need it removed. It is sitting in our apartment courtyard. Ground floor, No stairs.

install floor tiles for the whole house except toilets and laundry. we already ordered 600x600 porcelain tiles, just need installers, need a quote please

4m x 10m and 3.5m x 4.5 m ourdoor areas need to install dry lay porcelain pavers.

have recently laid porcelain glossy tiles and they've got some minor light surface scratches. Need someone to clean and remove scratches if possible.

I am seeking quotes to remove and replace failed sealant in the expansion/movement joints on my alfresco tiled area and steps. The tiles are stone/porcelain, and the existing joint sealant has deteriorated and separated between tiles and along the step edge.

Need 40sqm of 600x1200mm floor tiles laid and roughly 5am of 200x200mm splash back tiles installed.

Remove 100 sqm of outdoor loose slate tiles. Install porcelain tiles. Tiles and material supplied.

I need someone to do porcelain steps and risers for 8 steps with mitres. Materials will be provided besides the resin for the mitre joint. Need to get this done tomorrow. Thanks

Remove/grind (if required) stump and remove porcelain tub that is stuck

I am looking for someone to assist with the repair of a Blue Danube China serving platter. It appears to have snapped cleanly into two pieces except for one small bit on the handle. It is sentimental so will be used for display not service.

Porcelain tile. 1200*550(previously coped, with drop face on long side now) Need to cut it to 1200*300 No hand cut

I need someone to replace the two tiles pictured. I have the new tiles. Can supply grout and glue as well. One will need to be trimmed. I will clean the area of the old glue and grout prior to install.

Small chip on our kitchen porcelain benchtop that needs to be fixed

I’m looking for an experienced tiler to install large format tiles for a kitchen splashback. Material details • Tile size: 600 x 1200 mm • Tiles will be supplied by me • Splashback area for kitchen wall and window (sill and side wall) • I’m happy to purchase grout and adhesive if you let me know what is required. Requirements • Experience installing large format tiles • Ability to cut tiles neatly for powerpoints/switch openings • Professional finish for kitchen splashback work Timing My schedule is a little flexible as I’m currently waiting for the stone mason to complete the benchtop measurement and installation - expect to be done in the next week. Hence the work will likely be late next week or early the following week. Measurement / site check I’ve already done a rough measurement for tile quantity. A site visit is welcome which I assume it would mainly be to confirm layout and check details before installation. Please provide a quote for labour and let me know your experience with large format tiles

Description: Looking for an experienced tiler to remove existing kitchen splashback tiles and install new tiles. Scope of works: • Remove existing tiles (as per photo – behind cooktop and along bench) • Prep surface for new tiling • Install new splashback tiles (we will supply tiles) • Cut around power points, window, and rangehood area • Grout and silicone finish • Clean, straight alignment required Area: • Small kitchen splashback (approx. 3–5m² total) Materials: • We will supply tiles • You to supply adhesive, grout, and tools What I’m looking for: • Experienced tiler with clean finishes • Attention to detail (straight lines, even spacing) • Must leave site clean Access: • Easy access Timing: • Flexible – next 1–2 weeks Location: Glenwood, NSW Please include: • Quote or price range • What’s included • Photos of similar work Happy to answer any questions.

Resealing needed between the bottom of my range hood and the tiled splash back in my kitchen (wear and tear). Remove old silicone. Clean and Prep. Apply new, appropriate heat resistant silicone. finish needs to look neat and tidy. Pls quote Inc. materials.

Need tiling done for kitchen splash. Old tiles have already been removed, and standard square wall tiles will be provided. Space is roughly 2.8 square metres.

We are looking for a tiler to help tile and grout a kitchen splashback with kitkat tiles. All grout and tiles are provided. Our tiler has a scheduling delay and we need our kitchen finished over the weekend Spashback area is small. Circa 3sqm.

Small kitchen's splashback sealant needs replacing

At bottom edge of splashback the white sealant between splashback and kitchen surface needs replacing

Looking for someone to tile about 8m~ of splashback. Timing are flexible over the next month or so. There will be 4 powerpoints, as well as tap and handles to manoeuvre around. Tiles will be provided on site and will either be subway or small square. Tweed Heads. Open for negotiation, price set is to engage conversation.

Wanting to have our kitchen slash back retiled appprox 3.8m x 75cm

Removal 4 mirrored splashback Removal wallpaper Patching and painting where patched

I will supply the tiles - see photos for details. Tile kitchen splash back approx 1m2 area in total. Also tile bathroom inset strip drain. Located 45 mins north of Sydney harbour bridge

This is a tiling work for a laundry splash back. The tiling area is about 3.40 sqm. Tiles photo is attached, 6-sided (hexagon) tile, and tiles and grout are provided. We will need to cut the tiles Thanks

Tiler needed - kitchen flashback tiling. 3.2 m squared across 3 walls. Tiles provided, 10 x 10 mm, 8 x boxes of 50 tiles. No grout provided, grey grout required. Kitchen will be ready for tiling by Wednesday 14.

Hi there, I need an experienced tiler to install a kitchen splashback at my home in Hillsdale. Details: • Location: Hillsdale • Splashback area: standard kitchen (U-shape) • Tiles supplied: Newport Matte White Subway 75×300 • Grout: white (or happy to take your recommendation) • Benchtop already installed • Please supply adhesive, grout, trims and tools Please include in your quote: • Labour • Cutting around power points • Clean up and silicone finish Ideal install time: asap Site visit for measurement welcome.

Hi, need help with finishing the removal of a small cupboard utility sink splash back and sanding/grinding down the screeding (ready to paint). Other jobs in this utility room also to be discussed if interested and within capabilities, job required asap!

New kitchen has recently been installed. Now require splashback tiles. I'm seeking for help to finish this before Christmas. I will supply tiles. Can you supply white grout, white aluminium Square-Edge Trim, and labour? Area: 600x4100 { 1900 (window wall) + 2200 (oven wall)} Note: There are tight areas, see photos.

I need someone to remove the existing tiles from my kitchen splashback and prepare the wall for a new glass splashback. Work includes: - Removing tiles from roughly 2 square meters - Smoothing the surface - Any filler or gyprock patching needed to get it flat and ready for glass installation - No rubbish disposal needed Exact measurements are in the attached photo

Tiler or experienced handyman who is good at tiling to tile a small kitchen splash back area with white subway tiles over the top of a glass splash back. Ideally tomorrow. Only a small area. One long strip 100mm height x 2000mm length and 1 other panel roughly 570mm height x 600mm roughly. All materials supplied. Looking for someone to do this task any time tomorrow ideally or Friday at the very latest. Thank you for considering.

Remove the existing grey tiles behind my laundry sink and on the right-side vertical wall, then install new waterproof tiles that match the white benchtop and cabinet. Small laundry area (see attached photo) Remove current grey tiles (back wall + right wall) Supply and install new waterproof tiles (preferably white or off-white to match the benchtop) Apply proper waterproof sealant around all edges Clean up after the job is done

Hi, ive just had a new kitchen installed, I just need the splashback done. Estimated area 4m sq. I have already purchased the subway tiles. The job would need to be done on a Wednesday, friday or saturday. Please send me a rough quote if youre interested in the job. Thanks!

For a small new bathroom 1.2m w x 4m L, base preparation getting to height required prior to water proofing process, and floor wall tiling to finish. Must be licensed relating to the jobs involved. Job is ready to be commenced asap.

It seems I have a few cracks in the grout on my shower floor plus some silicone erosion on the second floor of my townhouse. Furthermore outside my shower on the bathroom floor several tiles are cracked , probably around 3-6 tiles. What whould it cost to fix these issues? And how much would each job cost seperately?

3 bathrooms and 1 laundry

I need bathroom tiles to be painted white and grout in floor tiles to cleaned the shower screen will be removed for you to do the job

We are doing a new bathroom and need a tiler

Tiles re grouted and caulking fixed up in shower

Looking for a painter experienced with Dulux Renovation paint range for tiles (and proven track records in this specialty - please show your portfolio), to paint bathroom floor and wall tiles (walls tiled up 2m up). The Dulux Renovation Range is a multi-product system. You'd need to use Renovation Range Primer, Tiles & Benchtops topcoat for walls, Floors topcoat for the floor (with non-slip additive), Clear Coat for wet area protection. You provide the paint (as per proposed budget). Alternatively, I could provide the paint. The bathroom floor plan and pictures are attached. Thank you!

Tiles coming away from ceiling and I want them retiled .

Approximately 13 pieces of 600mm x 300mm porcelain tiles need to be individually cut to cover area of roughtly 270mm x 4800mm on top of the shower wall to the ceiling, plus replace 1 piece of 150mm x 600mm broken tile behind the toilet (will remove the toilet pan to make it easy access before you come).

Just 2-3 tiles in my bathroom have came out so I need someone to just replaster it nicely so it doesn’t shake or come out

Paint bathroom with white night paint undercoat primer then epoxy coat over it not a big bathroom or to be pain in the bathtub

Two holes from an old towel rack need to be fixed and blended so that they are unnoticeable. Have had this done before in our spare bathroom, and it was amazing - but our lady has moved overseas. Shouldn’t take longer than an hour. Holes the size of a 5-10 cent piece.

I need the following completed in a bathroom ensuite: 1. Remove 6 screw plugs from tile grouting and fill the holes. 2. Replace one chipped tile (including grouting) 3. Remove towel heat rack and replace associated tiles if required. I have the spare tiles available for the tiles that need to be replaced.

Secure and grout a singular fallen tile from the top of a window frame in the bathroom. Preferably over the weekend, can cross check timings through the week.

My new shower and the rail is larger than the old one and I need new screws and the attachment drilled into tiles. Must have experience with tools and bathroom tiles, really don’t want it cracked!

my upstairs bathroom has a tile that has broken. it is not inside the shower, it is outside it. i suspect there’s an issue with how the tiling was done

We snapped a screw from our towel rail which we can’t get out. Need someone to remove old screw, fill hole and drill a new hole above it.

I may need replace the 2-3 tiles with cracks or just use water proof grout to seal the tiles. And just re grout all the tiles where you can see the grout is missing. Most importantly the lower area will need grout in it. Also double water proof.

Need painting of floor tiles in master ensuite and a bathroom cabinet in guest bathroom.

One section of our bathroom shower wall tiles are needing replacing. The job includes: Removal of tiles from section shown in photo Surface preparation Waterproofing of section with membrane Tiling of section with new tiles We have already purchased the replacement tiles. You will also need to provide waterproofing membrane system, tape, primer, adhesive, silicon and grout. Grout will need to be exact colour matched. Refer to the photo with the purple arrows, the section to be removed is from the top shelf all the way to the floor and includes the corner tiles to the black framed doors. The height is 1.65m x 60cm. Only experienced timers please. This job requires a perfectionist who takes pride in their work.