Find a professional tiler in NSW

Need sand cement base for outdoor patios around 140sqm I’ll supply everything, give me your price

Approx measurements 6m porch 2.6m steps including sides 2m buffer Total 11m2 Preferably 600x400 tiles

Floor tile entry landing, 2 risers and treads and one riser at entry landing at street

Apply floor tiles to laundry floor just under 3 square metres

Looking for a tiler to supply grout & glue etc to tile 24sqm of floor tile in Cooks Hill. We will supply the 8mm tiles. Looking at 400-600mm sq tiles

We removed our wardrobes and noticed there were two areas of tiles missing. We will be moving our new wardrobes back over the area but need it to be filled in with self levelling concrete or other material. Please note that the wardrobes will cover it so it doesnt need to look pretty, but should be level.

I have the tiles supplied, I just need the labour completed

Hello, I need a foreign company who deals with vinyl tiles to come and lay the remainder of the missing gaps. It’s approximately 50 m². ASAP. Need to match as close to a existing grey tile.

I’m planning to change my existing tiles and do a tile-on-tile installation. It’s only for the downstairs area.

I’m wanting to tile over my old bathroom floor tiles in the shower only (the small white tiles in the shower and under the toilet). The waterproofing is in tact and there are no concerns about loss of space so I just want to tile over them. I will provide the tiles and drain cover. Size of area is around 1 x 2m. The new tiles match the wall tiles (plain white 30 x 60cm).

10m2 kitchen & small laundry to be tiled. Floor has been levelled already. Tiles will be supplied - As shown in photos

Hi, we require floor tiling to be done in our walk in pantry. Black and white checkerboard style. We have all tile spacers, tiles, leveling wedges, tile adhesive and grout to provide.

Looking to tile our 2 bedrooms in our apartment. Each bedroom is about 12 meters squared. The tiles that will be used is about 20x100cm wood like porcelain tiles.

Alfresco Floor Tiling Dimensions: W: 8630mm x Length 2650mm. Total Area: Approximately 25 square metres. Scope: Installation of outdoor-rated tiles on already available slab. Tiles will be provided by the owner. Installer will bring all other required glue and grout etc. Note: Work area left clean and ready for immediate use. Any wastage to be removed from the site by the installer.

Tiling floor I will supply the tiles myself Please consider installation cost only. Tile size is 150*900 I prefer installing in herrinbone style Please let me know the price for both normal and herrinbone style. Total area 115 sqm Part of it is slate now, partly carpet. Need some carpet removal and leveling as well. Please give me installation cost per sqm

Carpet Removal and Disposal and Bedroom floor tiling - area 10 m2

Remove and install new splash back tiles (likely subway tiles) Lay floor tiles in the kitchen, approx. 7-8sqm. There is a small amount of lino on the floor that requires removing (see image) along with a few staples in the timber floor. Ive injured myself and unable to finalise the removal of the small amount of old lino floor. The flooring is largely timber with a small concrete section around the wet area (see red section of flooring in image) All tiles supplied. You need to supply grout, adhesive, spaces, etc

Need to have outdoor concrete slab tiled 2200 x 1320 on a gentle slope, tile size 60 x 30cm

Screeding and tiling of 8m2 floor. Floor tiles 300mm x 600mm. 2 x drains. Waterproofing will be already complete.

Tiles to be supplied by owners. Metal angles, adhesives, leveller & grout to be supplied by airtasker. - Laundry floor: remove remaining slate tiles, level, supply & install metal angle and tile/grout. - Fire place floor: angle off and level & tile/grout.

I have got 4-5 tiles that are cracked in size of hairline and some are even deep whole as well. Tried fixing with Bunnings easy tile fixed but could not fix the issue and it’s still visible. I do t have same colour tiles in the shop so cannot replace. Your quote should include all materials, labour , airtasker or any other costs including it.

Pick up 7 sheets of porcelain (1600 x 3200) from Alexandria, cut to size and then install on site to cover a concrete pillar with mitred edges, lay on floor and walls of a guest bathroom, and cut two small pieces for finishing a chest of drawers.

Need 40sqm of 600x1200mm floor tiles laid and roughly 5am of 200x200mm splash back tiles installed.

Remove 100 sqm of outdoor loose slate tiles. Install porcelain tiles. Tiles and material supplied.

I need someone to do porcelain steps and risers for 8 steps with mitres. Materials will be provided besides the resin for the mitre joint. Need to get this done tomorrow. Thanks

Remove/grind (if required) stump and remove porcelain tub that is stuck

I am looking for someone to assist with the repair of a Blue Danube China serving platter. It appears to have snapped cleanly into two pieces except for one small bit on the handle. It is sentimental so will be used for display not service.

Porcelain tile. 1200*550(previously coped, with drop face on long side now) Need to cut it to 1200*300 No hand cut

I need someone to replace the two tiles pictured. I have the new tiles. Can supply grout and glue as well. One will need to be trimmed. I will clean the area of the old glue and grout prior to install.

Small chip on our kitchen porcelain benchtop that needs to be fixed

Have a small chip in my bathroom sink that needs to be repaired. I realise it’s not possible to make it look like nothing happened, but hoping to get it repaired so it’s as unnoticeable as possible. Very small, probably about 1.5cm. I also have the chips that can be re-glued.

- repair cracked toilet cistern lid, lid has cracked in half so needs to be glued and repaired.

I need to have three porcelain tiles cut. I already have the tiles themselves, but I need them cut into the following shapes: 1. One long rectangular piece: 100 cm x 10 cm 2. One L-shaped piece: • Long side: approximately 45 cm x 7 cm • Short side: approximately 13 cm x 12 cm 3. One small rectangular piece: 3.5 cm x 2 cm After cutting, I will need these pieces to be laid/installed as well. Could you please provide a quote for this service?

We need to have the old, cracked sink removed and the new, identical, replacement sink installed, in our upstairs bathroom.

Need a chip fixed on the porcelain sink

I dropped a glass jar on my porcelain sink causing a few cracks. Hoping to make it near invisible 😱

Porcelain tile for external skirting, require cutting for height and to allow for paving slope on return walls. Tiler to supply cement based fixing materials as required. All weather access, close to street. Less than 6 metres in length, two internal corners two external corners

46 M2 porcelain tiles outside living area

I need 2x200mm holes cut into porcelain tiles and melamine + underneath. Possible second job: Another 40cmx25cm shelf with porcelain and plasterboard cut. Then the melamine board cut in a square to reattach with a hinge-like a 'little gas access door. See pic. Prefer someone based in the Lower north Shore or Norhern Beaches area.

Replace an old porcelain wall mounted basin, 600x400x120mm with the same model, same size. Want removal and installation cost. I will supply the basin.

Kitchen splashback refresh - remove glass - patch/prep wall - install built in range hood with frame and plaster etc (range hood supplied) - install floating shelves next to range hood - tile lower section (tiles supplied) Alternative - remove glad and existing range hood - instal cabinetry and built in range good Tile lower section (tiles supplied) Open to both options depending on price etc.

Replace damaged glass splash back. Approximately 1metre square

Need someone reliable to come out and quote on a job tilling kitchen splash back. wall sizes 400x600-700x600-800x600-1050x600-800x700-1000x600-1400x600 in herrringbone style

Hi, I would like to install the stainless steel splashback wall into the commercial kitchen. Around 2400mm X 2000mm Please quote the price with the splashback since I don't have it. Shop in Glebe 2037

Looking for someone to cut a off cut of 20mm marble we have for a bathroom vanity. Two pieces to be cut as follows no installation required: 1. 900x450mm benchtop - square front edge, single tap hole and cut out for undermount sink. 2. 900x200mm splashback

I need mirror splash back done in my kitchen. Clear mirror. Dimensions are on the photos. Just at the back wall

I want my splash back done for my kitchen.

We have removed tiles from wall. Need a tiler to complete new splashback. STRIP ONLY 2 X 200mm TILES HIGH X 3000mm LONG. VERY LITTLE CUTTING. Approximately 400 H X 3000 L Tiles to be supplied by contractor. We are not fussed about tile style (left overs are fine) but would prefer some colour. Easy. Quick Job. Half a days work

I need someone to remove the existing tiles from my kitchen splashback and prepare the wall for a new glass splashback. Work includes: - Removing tiles from roughly 2 square meters - Smoothing the surface - Any filler or gyprock patching needed to get it flat and ready for glass installation - No rubbish disposal needed Exact measurements are in the attached photo

Tiler or experienced handyman who is good at tiling to tile a small kitchen splash back area with white subway tiles over the top of a glass splash back. Ideally tomorrow. Only a small area. One long strip 100mm height x 2000mm length and 1 other panel roughly 570mm height x 600mm roughly. All materials supplied. Looking for someone to do this task any time tomorrow ideally or Friday at the very latest. Thank you for considering.

Remove the existing grey tiles behind my laundry sink and on the right-side vertical wall, then install new waterproof tiles that match the white benchtop and cabinet. Small laundry area (see attached photo) Remove current grey tiles (back wall + right wall) Supply and install new waterproof tiles (preferably white or off-white to match the benchtop) Apply proper waterproof sealant around all edges Clean up after the job is done

Hi, ive just had a new kitchen installed, I just need the splashback done. Estimated area 4m sq. I have already purchased the subway tiles. The job would need to be done on a Wednesday, friday or saturday. Please send me a rough quote if youre interested in the job. Thanks!

Tile kitchen splashback with 300x600 tiles. Already purchased necessary amount. You would need to provide all other materials and white trim. Cooktop splashback area is approx 2450x60. Sink splashback area approx 2550x15.

Subway tiles + grout + silicone kitchen splashback. Tiles supplied.

I want to replace the glass splash back I currently have in my kitchen with tiles I need someone to remove the existing glass and install handmade zellige tiles The length is 4.5m and height is 0.6m, so 2.7sqm of tiling, the zellige tiles are 10cmx10cm squares, so can fit 6 exactly vertically stacked without cutting Tiles and grout provided, not the tile glue Experience with zellige tiles preferred

Hi! I’m looking for an experienced tiler to tile over an existing glass splashback in my kitchen. Details: • Area to be tiled is just under 4m² (photos attached) • I have already purchased the tiles (ceramic subway tiles) • Job will include surface prep, adhesive, cutting tiles to fit, grouting and clean-up • You’ll need to bring all other materials/tools (adhesive, grout, spacers, etc.) Important: • The tiles need to go directly over the existing glass splashback • I’ll need to rely on you to know the right adhesive and prep method to ensure a proper bond over glass Location: campsie Flexible with date but ideally in the next few weeks. Please let me know: • Your experience tiling over glass (or similar) • Your availability • What materials you’ll provide and need

Need someone to remove a splash back from Kitchen in apartment and dispose it, today at 4 pm it's L shap 2000×600m each side

Require a basic splashback for bathroom vanity 900mm. Supply & install.

Details: Looking for a qualified tiler to: • Tile our newly built-out kitchen splashback area (see photos for reference). • Use 100x300mm white wall tiles (tiles supplied). • Cut and lay tiles neatly around windows, power points and corners. • Grout and seal the splashback area properly for a clean finish. Additional info: • Plywood backing is already in place and ready for tiling. • Bunnings is around the corner if any extra materials are needed — we can reimburse you for anything extra. Must have: • Your own tiling tools and experience with kitchen splashbacks. • Availability to complete the job ASAP.

Add 12 tiles (for design purposes only) above existing tiles in kitchen splash back. Photos of splash back area and new tiles attached

We want to get some quotes to re-grout the bathroom tiles. Would need all tools and equipment for job.

Have two corner shelves, they come with screws and plus, but need someone with proper drill bits experienced (ie won’t crack tiles) in putting them into shower tiles. after drilling, needs silicon put in holes before plug and screws.

I may need replace the 2-3 tiles with cracks or just use water proof grout to seal the tiles. And just re grout all the tiles where you can see the grout is missing. Most importantly the lower area will need grout in it. Also double water proof.

Need a licensed tradesperson to overlay tiles in 2 bathrooms, remove and reinstall the existing toilet, shower screen, vanity and mirror cabinets.

Builder looking for 3 new bathrooms tiling. Need to have own tools to complete the tiling work. Attention to detail is required. Size: average 4 sqm floor size Ceiling: 2.5m height Wall tile: 1200x600 All floor tiles already laid All angle finish. All tile, adhesive, angle are onsite. Can do day rate or total job price. Put your offer in. Thanks

Need a experienced Tiler to replace one of the broken tile in the bathroom. I have the spare tile.

New tiles and shower screen Remove and dispose existing tiles and bathtub.

My bathroom tiles are broken and I need someone to replace probably around 2–3 of them

One of the bathroom tiles on the wall has fallen and also chipped the floor tile. Please could you quote for fixing both. I don't have spare tiles.

Plumber had to break through two tiles and the wall behind it in order to fix a leak. Now I need that fixed. I have the tiles you need, but you would need to bring everything else. See images for before and after.

Hi, this is David Chapman. I’m looking for a licensed and insured tiler/waterproofer for a small bathroom retile in Sydney. Job includes: – Remove old tiles (walls + floor) – Keep existing shower base – Re-waterproof (AS 3740) – Retile with 300×300 tiles (bathroom + shower floors & walls) – Install a 300×300 niche – Ensure correct fall to drain – Refit vanity + shower screen Bathroom size: Floor 1200×2400 mm, shower 730×780 mm. I can send photos + full scope. Thanks, David

We have approx. 8 large bathroom wall tiles that have developed cracks. We would like a quote to either replace and or repair the cracked tiles or if that is not possible a quote to replace the whole bathroom wall tiles. Three attached photos: One photo showing the worse crack. One showing the length of a hairline crack between the two red crosses which is unfortunately hard to see in a photo. One showing a vertical crack between two red crosses which is also hard to see in a photo.

Bathroom tiling is getting a little dark and stained. Grout is also grimy and needs a detailing.

Tiles are loosing grip in the shower area of the bathroom. And they need to be fixed. Happy to have a chat on the available options for the solution

Re grouting bathroom floor tiles

Looking for an experienced tiler or handyman to remove old grout and re-grout floor tiles in two small bathrooms and laundry. (About 7 sqm in total), im in Chiswick 2046

I need a handyman or tile specialist to help with replacing this broken bathroom tile (pictured) tile size is approximately 8cm x 30cm. Tile looks to be white glossy subway tile. I do not have the tile

Need painting of floor tiles in master ensuite and a bathroom cabinet in guest bathroom.

One section of our bathroom shower wall tiles are needing replacing. The job includes: Removal of tiles from section shown in photo Surface preparation Waterproofing of section with membrane Tiling of section with new tiles We have already purchased the replacement tiles. You will also need to provide waterproofing membrane system, tape, primer, adhesive, silicon and grout. Grout will need to be exact colour matched. Refer to the photo with the purple arrows, the section to be removed is from the top shelf all the way to the floor and includes the corner tiles to the black framed doors. The height is 1.65m x 60cm. Only experienced timers please. This job requires a perfectionist who takes pride in their work.

Need this crack fixed to prevent water leak underneath the tiles … unsure if it’s chipped grout or silicone…