Find professional local plasterers in NSW

I have roughly a 70cm x 50cm hole in kitchen ceiling that needs repairing. The Gyprock thickness required is 13mm (not standard 10mm). Please refer to photos for description. More work available if you’re interested.

Hi, I need someone to please install a dryer and 600 x 300mm wide x 600mm high cupboard to a drywall. I also need to fix a bike rack to a brick wall.

Create a doorway between an upstairs bedroom and small adjoining room to create a walk in wardrobe. It's a plasterboard and timber stud wall, not double brick! Need doorframe but no door. We'd also like hanging racks and shelves in the new walk in wardrobe so if you can do that, happy to discuss of course, or we can take care of that separately.

Want to create a room by closing off an area with two gyprock walls with a door frame

I need to move an internal plaster wall to open up my dental surgery. I also need to repaint the surgery and if possible create some curves above doors using light wood ( pls see Ai photo attached)

Needing assistance with fixing and painting a gyprock wall

Quotes to cut out damaged gyprock along the bottom near the floor & replace it. Also replace skirting boards. 2 small walls. Both are under a metre long. Height is probably under 20cm that needs replacing. Plastering also. Shower leak was fixed a number of years ago. We’re just finally getting around to fixing the wall.

90 mm cove cornice to a total length of 2x5.4 • Set, tape and finish approximately 25 lineal metres of joints. • Form and finish 4 internal corners. • Ceiling height: 2.7 metres. • Leave all surfaces sanded and ready for paint.

Plaster 2 walls i have all materials

I need a professional to securely mount an IKEA Stockholm 2025 mirror (90x90cm) on a Gyprock/plasterboard wall. The mirror weighs approximately 13.5kg and has a built-in shelf, so it must be perfectly level and structurally sound. Scope of Work: Assessment: Identify if studs are available at the desired location. Installation: Securely hang the mirror using appropriate heavy-duty fixings. If no studs are available, you must use metal toggle bolts or hollow wall anchors (Molly bolts) rated for at least 20kg. Precision: Ensure the mirror is 100% level (the shelf makes any tilt very obvious). Safety: The installation must be flush and secure enough to handle the weight of the mirror plus items placed on its shelf. Requirements: Experience: Proven experience hanging heavy mirrors or artwork on hollow walls. Insurance: Must have active Public Liability Insurance. Tools: Please bring your own stud finder, spirit level, drill, and heavy-duty hollow wall anchors (unless you specify otherwise).

We’re moving out of a rental after 8 years and are looking for an experienced painter and wall patcher / plasterer to help get the walls back to a good, presentable condition. There are various marks, small holes, dents, and scuffs across the house from general wear and tear, hanging items, and a dog (some scratching on doors). This is very much an end-of-lease tidy-up, not a full repaint. The job is for 8 hours total, focusing on getting as much done as possible in that time rather than aiming for perfection. Property details: • 3-bedroom house • House will be completely empty • Walls + some doors need attention What’s included / not included: • ✅ Paint will be supplied (matched and ready) • ✅ Drop sheets provided • ❌ You’ll need to bring your own tools (brushes, rollers, buckets, sanding tools, etc.) • I will patch what I can the day before so it has time to dry Timing: • Monday 2nd February • Ideally 9:00am – 5:00pm (or as close as possible) Important notes: • This job is based on time, not a fixed outcome • We understand that repairs and painting don’t always go perfectly from A → B • Photos of example damage will be attached to give a clear idea of the work involved Looking for someone reliable, efficient, and experienced with end-of-lease repairs.

I would like an experienced carpenter/builder to rebuild the lower section of a gyprock wall (laundry) where moisture has caused the timber bottom plate and bottom of studs to rot & crumble away. In 2-5 years, I would like to rebuild this entire room (as understand the issue is bigger than this one wall!), but for now, would simply like the wall made structurally sound and rotten material replaced with moisture-resistant alternatives to buy me some time before I plan a bigger renovation. Will need to make the studs structurally sound (add something to support them at the bottom as no longer touching concrete base), add new bottom plate (something moisture-resistant please), and replace the missing gyprock & door framing. I've removed lots of the damaged materials so you can clearly see the issue!

Plasterboard wall repair after TV mount removal – professional finish required. I have a wall with multiple old TV mount holes, metal anchors, and a cable chase opening. I need: • All metal anchors removed • Damaged plasterboard cut back cleanly • New plasterboard patches installed with backing • Joints taped, skim coated, sanded flat • Entire wall repainted to match existing finish This is not a filler-only job — it must be done properly so the wall is perfectly flat and invisible after painting. I also want all cables hidden behind the wall Please quote including materials and paint.

Got two holes in the wall of my house The wall is of gyprock

I’m looking for a licensed and insured gyprocker to carry out ceiling patching, sanding and sagging repair work in my home. The ceiling was a glue only job, so if current gyprock can be screwed to the ceiling battens. Most rooms are currently empty with minimal furniture, so it should make access and clean-up slightly easier :) Rooms Overview Kitchen (The room mostly affected by sagging): Remove and replace approximately 6 square meters of gyprock ceiling. Open to suggestions here…. Living Room: 2x old oyster light holes & 1x speaker hole Dining Room: 1x AC vent, 1x oyster light hole, 1x speaker hole Garage: 2 x AC vent holes, 1x old speaker hole, 1x downlight hole and 6x old screw holes. Laundry: 1x oyster light hole & old fan hole Bedrooms (x4): 1x oyster light hole each room) Hallway: Patch light hole Prop and screw: Garage, 4x bedrooms Requirements - Must be licensed and insured - Quote must include all labour and materials - Clean, professional finish required All areas need to be finished and ready for me to paint. Quote to include all labour and materials.

Gyprock one wall 2400 x 3080mm (around a window) patch a hole 330x330mm and square set all four walls flush with ceiling. Sand ready for paint. Please refer to photos (No painting, architrave or skirting needed)

Damaged wall and need hole in wall repaired. Looking for someone experienced either plaster/gyprock repairs. - Internal wall - Standard plasterboard - needs patching, sanding + painting - must look neat and blended into wall - Ideally paint matching service as I am not sure I still have the original paint specifications (but will investigate)

We have a house which is about to go up for sale. The garage had a damaged dual electrical socket which has since been re-placed to another position but the old socket now needs filling and smoothing off. Completely flexible of time/date just let me know what suits you best.

Hi, I am looking for quotes to plasterboard my sunroom. It’s around 8sq/m. See attached rough diagram and photos. I will be adding timber sills and reveals so you would only be plastering up to the timber. There is one return needed on Wall 1 into the window. There is a ceiling gap that needs to be filled to join new plasterboard.

Hi, need the holes patched in ceiling, sanded and be ready for painting.