Find professional local plasterers in Inner West Sydney

TCL 65 inch P6LS tv installation on drywall in Rhodes unit VESA 200 x 200 Weight: 12.2 kg Wall bracket: already purchased Click full motion ME20MDW I’m available to assist during wall mounting Vacant unit and installation can be done anytime including late evening

Looking for someone to build and finish Gyprock bulkheads above newly installed cabinetry in our kitchen and laundry. Cabinetry is already installed. There are gaps between the top of the cabinets and the ceiling that need to be framed, sheeted with Gyprock and set/sanded ready for painting. There are a few sections in the kitchen and laundry - see attached photos for the areas highlighted that need to be completed. Looking for a neat finish that ties into the existing walls/ceilings and cabinetry. Please include labour and materials in your quote.

We will need to cut back the opening 200mm on either side of the Air Conditioner and make good there are 2 ac units. Check photos

Hi, we are needing some basic framing and gyprocking in a granny flat. - removing a door and gyprocking - installing a new door into gyprock - pushing through a gyprock wall to make a bigger opening. Not a job for a big building company, just a handyman or carpenter. Thanks.

Gyprock and plaster 4 holes in wall ceilings , have some of the cuts not all. Shop located at Canterbury station. Can start from 9.30 am on Thursday 20th, need to complete on same day. Professional job :)

We require these bulkheads cut back 200mm on each side and them patched and painted again, bulkhead is aproximately 300 x 300

Partition Walls & Doors — Supply, Build & Finish (5 areas). Unsure about price so number is a guide give me your offer Hi, I'm looking for an experienced tradie to build partition walls and install doors to divide up some rooms. There are 5 separate jobs, listed below with measurements. I'll attach a photo for each one so you can see exactly what's needed. Please note — you supply everything. All materials, doors, locks, paint, and hardware are to be provided by the tasker and included in your quote. Every wall must be fully finished: framed, sheeted, plastered, sanded and painted, ready to use. Any new door must be hung and working, with a lockable handle (key lock included). Job details: Wall 1 — Build a new wall approx. 2.06m wide, with a door installed( You can use the door from the top floor . Wall 2 — Build a wall only, no door, approx. 3.44m long.The 2 walls are not compeltely allign, one of them needs like a 10 cm nook so that then you can build the straight wall or if you have a better solution go for it! Wall 3 — Install a door into an existing 70cm opening (door to have a key lock). Wall 4 — 1.2m span: install a door here, or a short section of wall plus a door — whichever works best structurally. Door to have a key lock. Wall 5 — Remove the existing door, then build a wall to close off the opening completely. (You can use this door in the GF wall #1) Good to know: Ceiling height is 3.2m throughout, so please factor this into materials and pricing. No electrical work is required — no power points, switches or lights in any of the walls. All walls to be painted and finished to a clean, ready-to-use standard. Please include the full cost (materials + labour) in your quote. Happy to answer any questions before you quote — feel free to message me.

Filling holes in masonry plastered wall and reinstalling 2 x coat hook boards.

Plaster repair for 3 small holes in a wall, then hang floating shelf

My wife was attempting to hang a picture on the wall and has left one big hole and a series of other holes on the wall. The big hole needs to be filled in and the wall plastered

There is water coming in from the balcony through the wall into the house also a leak in the lounge room coming from upstairs

Our soundbar was previously wall-mounted beneath the TV but came loose after being pulled by our kids, leaving damage and holes in the plasterboard. Looking for someone to patch and repair the damaged area, securely remount the soundbar using appropriate wall anchors or studs, and tidy the cables. Please bring the required tools and mounting hardware.

We’re looking for a plasterer to do some patching and skim coating.

Patch hole on ceiling must be available tomorrow

I need around 3.5 metres of cornice fitted , I have already got the cornice

Need ceiling fan cutout patched sanded and painted with ceiling white. I have the gyprock cutout so no need to supply. Also have a couple small holes that just need patch no paint.

Had to relocate a light switch and power point so need holes patched. Also had to relocate and LED light on ceiling so need hole patched.

3 small drywall patches where paint and paper face have been pulled off, exposing gypsum core. Torn paper edges need trimming, filling, and the wall has a fine stipple texture that needs to be matched before repainting. Rental inspection on Friday the 24th of April - need it done ASAP.

Gyprocker needed to install 1 Wall 3.5m wide 2.8m height No cornice Studs Aquacheck plasterboard Tape joints Plaster Sand Situation: Current wall is brick render. Has rising damp. Want to attach new wall with studs.

I’ve already run all the Cat6 cables through the ceiling to the exact AP locations. I need someone to mount two Ubiquiti access points on a gyprock ceiling (approx 600g each). Proper ceiling-rated anchors or fixing into timber will be required — the included plastic plugs aren’t suitable. I also need one external Ubiquiti access point mounted on a masonry wall. The cable is already in the ceiling above that location and can drop straight down behind the unit. No cabling work required — just mounting and securing the three APs. photos show the two ceilings and one external wall