Find professional lock installation in West Melbourne

Hi We need few locks installed including deadbolts, sliding door locks etc. We will provide the brand new locks. Just need installation. Does the installation fees depend usually on number of locks or spent time at job? Thanks Amit

Install a privacy lock suitable for a cavity sliding door. I need quote for lock supply & install and also how much for installation only if I supply lock. The door currently does not have a lock, so the door may need to be cut or routed to fit the new lock. Ensure the lock operates smoothly and the door closes and locks properly. I have attached one shower door lock photo, similar we want for another bathroom.

I need a keypad entry system installed on the front door of my warehouse unit. Details: - Existing door: aluminium glass shopfront door with a dormakaba narrow-stile mortice lock. I want to KEEP the existing lock and key working as they do now. - I'd like a fail-secure electric strike fitted into the frame (e.g. Trimec ES2000 or similar), and a slim keypad mounted on the frame just above the strike. - The keypad/controller needs a TIMER/SCHEDULE so codes only work during business hours and are locked out after hours. - A small controller can be hidden in the ceiling above the door. There's a power point nearby (on a UPS), so no mains wiring should be needed. - Important: this is a marked emergency exit, so the inside handle must always open the door freely (no code or key to get out).

I need a keypad entry system installed on the front door of my warehouse unit. Details: - Existing door: aluminium glass shopfront door with a dormakaba narrow-stile mortice lock. I want to KEEP the existing lock and key working as they do now. - I'd like a fail-secure electric strike fitted into the frame (e.g. Trimec ES2000 or similar), and a slim keypad mounted on the frame just above the strike. - The keypad/controller needs a TIMER/SCHEDULE so codes only work during business hours and are locked out after hours. - A small controller can be hidden in the ceiling above the door. There's a power point nearby (on a UPS), so no mains wiring should be needed. - Important: this is a marked emergency exit, so the inside handle must always open the door freely (no code or key to get out).

I need a keypad entry system installed on the front door of my warehouse unit. Details: - Existing door: aluminium glass shopfront door with a dormakaba narrow-stile mortice lock. I want to KEEP the existing lock and key working as they do now. - I'd like a fail-secure electric strike fitted into the frame (e.g. Trimec ES2000 or similar), and a slim keypad mounted on the frame just above the strike. - The keypad/controller needs a TIMER/SCHEDULE so codes only work during business hours and are locked out after hours. - A small controller can be hidden in the ceiling above the door. There's a power point nearby (on a UPS), so no mains wiring should be needed. - Important: this is a marked emergency exit, so the inside handle must always open the door freely (no code or key to get out).

Current Door Handle with Pin Privacy lock need repair as Pin lock doesn’t work

I need two existing round door knob locks replaced with two new smart locks that I have already purchased. The job includes: * Remove the two existing door knob locks. * Install the two supplied smart locks. * Ensure both locks are aligned correctly and operate smoothly. * Test fingerprint, keypad and manual locking/unlocking before finishing. The smart locks and all supplied installation hardware are ready. Please bring your own tools and only make minor adjustments if required for a proper fit. Experience installing smart door locks is preferred. I’ve attached photos of: * the existing lock, * the replacement smart lock, * and the door setup.

I would like to rekey 3 locks and replace a lock for my 4bhk house . I’m up for quote and negotiation

Need to install Smart Digital lock tomorrow possibly. TT lock

I have 3 sliding doors that need new locks installed. I'd like all 3 locks to be keyed alike, so the same key opens all of them. Please supply and install the locks. Budget without materials.

Need to replace the lock

Install front door lock. Lock jams and doesn’t go back in and hole in metal door frame needs to be hollowed

I have a sliding security screen door where the owner has lost the key. The lock mechanism appears to be working normally, so I believe only the lock barrel/cylinder needs replacing rather than the entire lock assembly. Please inspect and replace the barrel if suitable, or advise if the complete lock requires replacement. Please include: * Supply of a compatible replacement barrel/cylinder. Installation. * 2–3 new keys. * Testing to ensure the lock operates correctly. Photos of the existing lock are attached. Please quote your total price including parts and labour.

Guests accidentally locked the door and no spare keys. Need to break the door knob and replace. Will reimburse the materials

Install and supply two new deadbolt locking systems with an internal snibs. Must be black in colour. Front and back door of house as per photos shown. Repair broken window latch also. Repair kitchen window latch as well.

I need to replace the lock on my external hinge gate. It has broken twice and I want something installed that will be robust enough for the application.

The lock on my Toyota hilux canopy has snapped. I have the new replacement lock, I just need someone to install it.

I’ve got 2 new door handles with a key system ready from Bunnings, and I’m looking for someone to install them. The task involves replacing the existing door handles and adjusting the door frame to fit the new locking mechanism. Please bring any tools required, and ensure everything is fitted securely and working perfectly. Let me know if you have any questions!

Hello There, Door locks to be installed on two doors.

Installing an aqara u400 smart lock