Find trusted window repair experts in Parramatta

A quote of window and door repairs

Lots of drilling and heights involved (ladder required! Not supplied!) pieces have been semi assembled... Needs someone with some handyman skills and half a brain to work out how to make it work well...

We have awning windows that require repairs. One of them has a left end not shutting properly despite being fully winded and another not winding properly resulting in the window not being fully shut.

60 cm by 210 cm size. half needs replacement.

Seal and roller replacement needed on 6 aluminium sliding windows of varying sizes. Two of the windows are in the kitchen above the sink, requiring ladder access from the outside. The Tasker will need to supply the replacement seals and rollers, choosing standard options. The job should be done on weekends or after 3:30 PM on weekdays.

Due to condensed water window got damaged

Need 1 x flyscreen on 1 x window repaired & reinstalled

The mesh for my fly screen sliding door have been damaged and have come off from the bottom Need to fix it

Install fly screen for bathroom window

2 windows and 1 door need fly screen mesh replacement. High ceilings. Can send photos / measurements.

Fixing top screw on a little window security screen

I have a rectangular opening of my restaurant kitchen (as shown with green arrow), I want to lower the bottom for 20-30 cm. -the wall is standard gyprock wall(10cm thickness) -opening length 1970 mm -kitchen side has tiles. tiles need to be cut and re-installed -electric wirings will be removed by myself -The bottom has stainless bench which will be lowered with the wall -the corners will be reinstated photo 1 (kitchen view) photo 2 (outside view)

I have a rectangular opening of my restaurant kitchen (as shown with green arrow), I want to lower the bottom for 20-30 cm. -the wall is standard gyprock wall(10cm thickness) -opening length 1970 mm -kitchen side has tiles. tiles need to be cut and re-installed -electric wirings will be removed by myself -The bottom has stainless bench which will be lowered with the wall -the corners will be reinstated photo 1 (kitchen view) photo 2 (outside view)

I have a rectangular opening of my restaurant kitchen (as shown with green arrow), I want to lower the bottom for 20-30 cm. -the wall is standard gyprock wall(10cm thickness) -opening length 1970 mm -kitchen side has tiles. tiles need to be cut and re-installed -electric wirings will be removed by myself -The bottom has stainless bench which will be lowered with the wall -the corners will be reinstated photo 1 (kitchen view) photo 2 (outside view)

Gap between window glass and frame. Loose strip on the other end.

We would like to change an existing floor to ceiling window to a door with a fly screen which opens outwards. The project would involve: - Removal of existing window - Installing a framed glass door to match the trim / architecture currently in place - Placing two steps (ideally concreted but open to temporary options) The size is approx 2100h x 900w Thanks in advance.

The ropes that open the window are painted over and the window wouldn't open, and it's jammed. Need to fix and open the window

1 room - I need to remove the varnish off the wardrobe door, windows and skirting and repaint

Client purchased a property and settles 14 April 2025. They are hoping to replace 3 x windows and 1 x sliding door to steel windows. The client has more windows in future to install but would like to try out a labourer before I get the rest completed. The existing windows and door can be seen in the first two photos. The third photo is an idea of what the client wants installed.

Need window handle replaced or fixed. Do not have materials