Find a professional lattice installation service in Sydney

HI I have a backyard patio - replace lattice work and shad cloth - remove old plants and take old lattice work away - Due date: Flexible

Seeking a handyman to apply reinforcing brackets to a panel of fence on Saturday morning. The fence panel is old and rotten so needs some metal brackets applied. We have rear access and can provide a parking pass. - Due date: Needs to be done on Saturday, 20 May 2023

Upper part of backyard needs repaving approx 5 metres X 5 Lattice on fence needs replacing- 5 metres with decorative metal and the rest 4 metres with new wooden lattice new retractable hose needs installing (and remove old one) - Due date: Flexible

supply 3 pieces of lattice and screw some existing pieces back on

Lattice has come apart from our fence and the edges of fence need reattaching. I also have some chicken wire to go cross the top of my fence as my cat keeps escaping. - Due date: Before Tuesday, November 8, 2022

Please note, the offers that are coming through are ridiculous I got these $30 sheets cut at Bunnings for free originally, I just don’t drive. This job is for anyone who has a saw in their tool kit. I have a sheet of lattice that needs to be cut a tad bit shorter 1 cut straight line. I live in a studio & don’t have a saw. Can work in car park downstairs, you will need something to rest the sheet on. It’s flimsy wood not a big job.5-10min - Due date: Tomorrow

I need someone to supply and fit a latticework screen 1.8metres high and 3.6metres wide. It has to meet a building compliance requirements.

Replace a very old fence and balustrade going to the the second floor in my house

I have an unassembled bike shed and an old timber lattice board that I would like removed from my property. The bike shed consists of around 8 metal panels and some metal frames. The lattice is old and falling apart a bit. It's around 3m x 1.5m. - Due date: Flexible

some of my lattice fencing has become loose over the 20 years its been in place and needs some reattachment and strengthening to the main framework - Due date: Flexible

A new development means we are overlooked! Need to build lattice fence and paint at rear of property

Hi there, we need someone with a ladder and some nails to reattach this lattice to the brick wall behind it- shouldn’t take long, we just don’t have the tools

Hi there! We are looking for someone who can attach two wooden lattice panels to our backyard fence. We already have the lattice panels from Bunnings (they are vertical in the product image but we want to put them up horizontally): https://www.bunnings.com.au/lattice-makers-2400-x-600mm-traditional-lattice-panel_p0189446 This job will involve 3 components: 1. Remove the existing metal brackets and wiring above the fence 2. Cut the second lattice panel to size (our fence is approximately 3.3m long, so one of the lattices will presumably need to be cut to roughly 900cm) 3. Attach both lattices securely to the top of the fence. Our fence is wooden and around 1.8m high. While we have the lattice panels, we don’t have any of the tools or extra components needed to cut them to size and attach them to the fence, so you will need to supply those please. My partner and I have no knowledge in backyard DIY so we welcome your expertise! Please do let us know if there is more involved in this job that we haven’t thought of, or if you have any recommendations for ways to do this. Thanks in advance.

Hi I need a quote on building a 1. Lattice fence 2. Timber fence It needs to be 7 meters wide Attached is the reference photo The first photo has the red arrow for the fence .

We have an old lattice and vine that needs removing from pergola roof. Roof is 3 x 3 and all excess vine already removed. We will provide reciprocal saw + KN95 mask and ladder. Please bring own goggles and gloves. Two men. 2-3 hours. Needs to be reciprocal chainsaw from bottom and removed from top which can be accessed from shed next to pergola. Then need to take to front yard for collection by other.

We need someone with appropriate tools to attach three pieces of lattice to our back fence. The lattice is made to fit on the top. All it will require is a few screws or nails into the brackets on each side of the fence (6 x 2). You'll need a ladder to reach over.

Hello Airtaskers, I would like a garden lattice to be installed on a brick wall for a friend. The measurements are approx 2m in length by 90cm in height. There are about 6 screws already in the wall, with the wall plug. The job requires the drilling of 8-12 holes into the lattice and fixing it against the wall. With the same amount of screws and wall plugs. Screws and wall plugs are supplied for this job

Hi all, Very simple task - just need someone with a drill and knowhow to put together the surrounds on a lattice. Shouldn't take more than about 10 mins - so a generous offer! Look forward to hearing from you.

Hi Airtaskers, I have a 2400 x 1200 lattice frame with surrounds for my garden balcony that requires assembly. I'd also need some help securing it to the wall so I can hang some pot plants on it. Ideally without damaging the wall. Not sure exactly how we'd approach it but may need a strap of some kind. If a Bunnings run is needed that will be factored into price. Thought I would put a post on Airtasker to see who's willing to help! Does not require mitre sawing. Prob just a drill, a hammer, some creativity and some knowhow! :) Thanks and hope you're all keeping safe :)

Hi Airtaskers, I have a 2400 x 1200 lattice frame with surrounds for my garden balcony that requires assembly. I'd also need some help fixing it to the wall with ratchet strap so as not damage the wall. Shouldn't take more than 30 mins but thought I would put a post on Airtasker to see who's willing to help! Does not require mitre sawing. Prob just a drill, some creativity and (what I am severely lacking) - some knowhow! :) Thanks and hope you're all keeping safe :)