Book a professional blind repair service in Brisbane

Roller Blind bracket has fallen off wall (no stud only gyprock). Need alternative to get the bracket attached to wall again.

I have indoor roller blinds that need installing in two windows. It will require hammer-drilling into a masonry window frame. I have a hammer drill, and I think I have the correct drill bit, but hopefully you have your own that you can bring.

Hi - will need some help installing my DIY blinds custom built to fit my windows (5 windows). Would someone be able to assist once they arrive?

Hi. Kitchen roller blind fell down when cleaning. Need someone to put back up. ASAP. Minding home. Wi discuss price. Should be quick job. Time is limited - today, tomorrow morning 1/1 or Friday 9/1.

I have a ceiling-to-floor roller blind that has come out of the ratchet/end mechanism and needs to be slotted/clicked back into place. • Blind is approximately 3 metres long • It is a chain-operated roller blind, allowing it to be pulled up and down • Despite the chain, the blind needs to be re-seated correctly into the ratchet/end fitting • Due to the length and weight, this task will likely require two people to safely align and click it back into place • Blind fabric and chain are in good condition — it has simply come out of the fitting Requirements: • Experience with roller blinds / window furnishings • Own tools if required • Ability to safely handle a long blind and refit it correctly Location: Clayfield Preferred time/date: [Add if relevant] Please respond only if you have experience refitting or installing roller blinds. [Please note I’m not available on Wednesday morning. I’ll be available from midday onwards]

The chain on my roller blind has snapped. I need someone to take down the roller blind, replace the chain with a new one (which I have) and mount the roller blind back up on the door.

Drill Bunnings blinds in.

Hey guys, needing some quotes put together to get some blackout/pull down blinds for this space here. My dog has absolutely butchered the current ones so looking for one big one (kind of like the picture here) and wondering what the costs would be.

I need one old venetian blind replaced with a new one. It will involve trimming the new blind to 152cm x 93 cm

Install 8 blinds across doors and windows at our place. Blinds are new and in boxes. Will require two people and some blinds are quite long. Everything should be accessible by a chair or small step ladder. Needs to be done on 13 December. Plan for two hours.

Need help to install our second roller blind. The challenge is half of the window over the stairs and will likely need a very long ladder to reach as it’s probably too far away to reach from the top. The wall is also made out of concrete so it requires a lot of pressure. I have also included images of the blind we installed next to it for reference.

Install kitchen blinds x 2: 1 x inside top mount into 3mm steel lintel/double brick frame. 1 x above kitchen window frame. Hang VJ panelling around kitchen window and spare wall. Cut down/modify a library ladder. Cut pre-purchased brass rails to size. Would prefer one person to do all jobs. However, getting the blinds installed is priority. $200 is guide only for installation of two blinds. Price does not reflect cost of other jobs. Airtasker to quote. Thank you.

Put 2 blinds into wall. Will likely need to use screw in anchors.

Install new blinds. 4 blinds to install across small unit. Blinds vary in length depending on window. Shouldn’t take two long but may not assistance due to varying length of blinds They are roller blinds and will go behind the sheer curtains as seen in image!

Existing Roller blind has come off wall . Needs to screwed back in .

3 x blind installation + 1 X curtain rod Room 1: - install blind 2.6m wide NOTE BYO LADDER: roughly 3m height for this room Room 2: - remove old blind, replace with new blind - install curtain rod Room 3: - remove old blind, replace with new blind Blinds + curtain rods purchased from Bunnings. BYO tools + screws + ladder for room 1 (3m height) Can you bring a tool incase any of the blind lengths need to be cut.

Remove blinds and install pre-cut Venetian blinds - the blinds are to be affixed to a mix of concrete or wood, so masonry tools required There are 6 sets of blinds all up - the windows where blinds to be removed and installed are attached - Due date: Needs to be done today, Monday 15 September or Tuesday, 16 September 2025

Install a dual roller blind in kitchen. I have blinds and all the nails etc to install just need help actually installing

Blinds installed (3 drops in total, each have a black out drop). One hand drawn curtain installed (install brackets and rod) not including hanging actual curtain, I can do that. Both windows have pelmets and need brackets to be drilled. And install a cupboard door, 3 hinges to be drilled. I have a step ladder for blinds and curtain. I have all fixings.

Broken blind holder. Need to get fixed