Find a professional gate installation in Sydney Eastern Suburbs

The head of the dynabolt holding a gate hinge to wall has broken. The hinge is now loose. You’ll need to allow for : - removing the large gate including the motors swing arm - replacing the lower hinge (or just the bolt) - remounting the gate and making sure the gate swings correctly to work with the gate motor (no problem with the motors operating the gate previously). It may be possible to reuse the lower hinge, but it could be difficult digging out the old bolt and then securing a new bolt in that same place in a secure way. I’ll leave that up to you. Please explain how you intend to do the repair with your quote.

The automatic gate closing mechanism on an entry gate to a block of flats does not push the door firmly enough closed so the latch clicks tight and engages with lock. The system is new but has never worked properly. Door never locks properly. Labour: $75. Travel time: $25 each way. Total budget: $125

Fence around 40m. Automatic gate

Need an automatic gate for my driveway. Need to have aluminium vertical pickets look. Size is 3.0m wide x 1.2 high Power point is there. Its in between two walls so a singlw swing gate is best - Due date: Needs to be done on Thursday, 5 October 2023

Custom built timber gate needs to be modified with a cut-out to accommodate new PVC pipe that is mounted close by. Gate needs to be reattached more securely to the wall (anchors have come away several times previously). Gate needs to be reswung and adjusted so latch/bolt fits keeper. Estimate 2-3hrs labour, and a small allowance for hardware (anchors etc).

Hi, I have two outdoor timber gates that have started sagging slightly and no longer latch closed. They need to be re-aligned and adjusted so they close and click in smoothly again. Likely requires installing an additional hinge at the top of the gate, and making sure the gate hangs square. No major rebuilding needed.

1. Supply & Install 1500mm X 1000mm timber picket single leaf gate material treated pine 2. Supply & Install 1200mm x 1000mm timber picket single leaf gate material treated pine 3. Supply and install 1200mm high x 2000mm length timber picket fence material treated pine. The photos are for reference: - one gate will go where the blue gate is (blue gate will already be removed.) - the other photo of the empty space is where the smaller gate will go and fence running next to it behind garden.

We need the front wooden gate cleaned thoroughly while ensuring the wood is protected and not damaged in the process. Please follow these guidelines: • Use a mild, wood-safe cleaner (avoid bleach or harsh chemicals that may strip the wood or affect any existing sealant). • If using a pressure washer, keep it on a low-pressure setting to avoid damaging the wood grain. • Focus on removing dirt, mildew, and discoloration, especially around joints and lower panels. • Rinse thoroughly and allow the gate to dry completely.

Hi we are looking to install new timber gates 2.2m wide 1.8m high with 2 swing doors. Something simple. After New concrete driveway is done. Thanks

1 x gate requires timber panels to be re-fixed, deadlock to be supplied and installed and coated with a protective sealer 2 x gate requires timber panels to be re-fixed, and coated with a protective sealer

Timber enclosure with gate about 2m wide - sample picture available. - Due date: Flexible

Supply and install 2 outdoor timber gates - Due date: Flexible

Re-hang timber gate and shave side to fit. See hinge in photos. - Due date: Before Sunday, 27 November 2022

Timber outdoor garden gate built to replace old metal gate. Dimensions approx 900mm x 1800mm. - Due date: Flexible

Need to pick up a gate from Bunnings and some posts and a lock and install it. - Due date: Before Friday, 20 May 2022