Find a professional gate installation in NSW

Can’t get the gate to work. Has power. It is a beninca turbo. Intercom has no power idk if that is the issue.

I need someone to fix the automatic front gate which goes back but doesn’t close or move forward with it’s remote

Automatic Gate motor is not working.

Automatic Gate Motor not opening gate Foresee F500. Motor not opening, has power and signal to the board, the motor is clicking but not turning the gear. Previously have adjusted the track which has solved the issue.

Needs to service and needs a spare remote. Looking for a reasonable quote

Assist with construction of a shed a gate and a carport. Need muscle. Weekend work so extra cash.

The mounting plate where the automatic gate motor articulates has become detached from the post it was initially spot welded to. I'm looking for someone experienced in metal work and welding to prepare the mounting surface on the post to enable the reattachment the mounting plate and weld the plate back in place.

I am looking for a professional builder/contractor who can complete the following: Concrete Slab: From the back of the garage extending towards the front (for parking space inside and in front of the garage). Garage Works: Raise the height of the garage Extend the size if possible Improve the interior (gyprock or other suitable finish). Front Fence & Gate (Optional but preferred): Current fence length: approx. 26m Install new fence with automatic sliding/hinged gate. Requirements: Must have experience in concreting, garage renovations, and fencing Must be licensed and insured Provide warranty on work Quote should include materials + labour Please provide examples of similar work completed

Concrete and clear track to stop debris when it rains, and hold land in place to avoid gate operation

Welding plus fixing and automatic gates (motor is working fine but gates are not fully closing)

The automatic gate stop working needs repair or replace the motor. Anyone here know how to fix it? Thanks

My automatic sliding gate stopped working. Only click sound , while pressing the button. Need to fix asap.

I need an electrician to hardwire a recently installed automatic gate, which is currently running off an extension lead from an outlet.

I need to build fence with automatic roller gate ASAP

The head of the dynabolt holding a gate hinge to wall has broken. The hinge is now loose. You’ll need to allow for : - removing the large gate including the motors swing arm - replacing the lower hinge (or just the bolt) - remounting the gate and making sure the gate swings correctly to work with the gate motor (no problem with the motors operating the gate previously). It may be possible to reuse the lower hinge, but it could be difficult digging out the old bolt and then securing a new bolt in that same place in a secure way. I’ll leave that up to you. Please explain how you intend to do the repair with your quote.

Looking for a qualified electrician to install an automatic gate control system. Power supply is already available at the gate. Please reach out with your availability and quotes.

We want to install a remote operated automatic gate at the front of our house. Ideally Bifold gate with motor attaached to the door so it doesn't take extra space. Or a sliding door. If it can curve into a back wall, would be best. If not, open on a hinge. Since its a small driveway, i would hope you can do this without taking too much space from the driveway. You would be expected to supply and install the gate. Build the side fence to accompany the gate for the entire entrance is blocked. Note: Electric connection not available so needs to be brought from the house (approx 20 ft).

Looking for someone experienced with automatic gates to diagnose and repair my remote-operated gate. Details: - Issue: Gate opens normally but won't close (could be faulty obstacle sensor or misalignment) - Type: Remote-operated sliding/automatic gate - Current setup: Photos attached showing: * Cream colored motor unit (shown in photo) * Black sensor box on white post has damage with temporary tape/glue repair * IMPORTANT: Cosmetic appearance of the repair isn't critical - main priority is getting the gate functioning safely and properly again - Timeframe: As soon as possible Requirements: - Experience with automatic gate systems - Must have own tools Please quote including: - Parts (if needed) - Labour - Call-out fee Please respond with: - Your experience with similar repairs - Earliest availability - Estimated cost range *Note: Please let me know if you need any additional information about the gate system.

The automatic gate closing mechanism on an entry gate to a block of flats does not push the door firmly enough closed so the latch clicks tight and engages with lock. The system is new but has never worked properly. Door never locks properly. Labour: $75. Travel time: $25 each way. Total budget: $125

i need someone to provide and install automatic front gates

External gate frame water damaged and needs to be replaced. Material costs to be reimbursed seperate to fee

We have an old timber painted gate. The timber is rotting so I need a timber replica built and hinges and latch moved from old to new gate. Task would include buying materials, making the new gate and installing.

Large outdoor timber gate / door. Need to change direction from opening inwards to open outwards. Also to install a deadlock / deadlatch (supplied)

To replace a sideway timber gate (making from scratch or custom a pre made one). We need a new gate, frame, hinges, lock and installation.

Custom built timber gate needs to be modified with a cut-out to accommodate new PVC pipe that is mounted close by. Gate needs to be reattached more securely to the wall (anchors have come away several times previously). Gate needs to be reswung and adjusted so latch/bolt fits keeper. Estimate 2-3hrs labour, and a small allowance for hardware (anchors etc).

Description: I need a handyman/carpenter to carry out minor repairs on an outdoor timber gate. Scope of Work: 1. Replace the top timber rail on the gate — the existing one is weathered and slightly detached. 2. Install a new gate latch (standard side gate latch; please supply if possible). 3. Replace the vertical timber support post on the left side of the gate frame — it’s deteriorated and no longer securely fixed. 4. Check overall gate alignment and ensure it opens/closes smoothly once repairs are complete. Materials: • You can quote for supply and installation of replacement timber and latch. • Please ensure the new timber is treated and suitable for outdoor use. • Paint or prime to match existing colour (if possible). Access: Ground-floor courtyard, easy access from driveway.

Hi, I have two outdoor timber gates that have started sagging slightly and no longer latch closed. They need to be re-aligned and adjusted so they close and click in smoothly again. Likely requires installing an additional hinge at the top of the gate, and making sure the gate hangs square. No major rebuilding needed.

See photos. Existing Timber Gate and Posts require relocation from existing position/location to just in front of the gas meter which is located approx 1-1.3m away. No new door is needed just relocation of the existing door. You will need to either re-use or create a new frame and post on either side of the gate.

Fix timber gate include the latch

Please separate pricing as your labour (e.g. $500) + materials (I.e. at cost). Looking for a skilled handyman or carpenter to install a timber gate inside my property to match the front fence. - Gate type => Timber, looks like the front fence. - Dimensions => 1200 high x 4800 wide with <1800 x2 swing sections (see postid note sketch). - Location => Side passage behind end of driveway. - Mounting => TBD. Likely bolted to house on one side &/or with 3-4 new posts newly installed post (by you). - Hardware provided => Installer to measure and provide all gate inputs (timber, latch, screws, bolts, post(?), etc). OR order to measure & I can pay and pick up based on an preorder nearby(ish). - Requirements => Level & secure, smooth swing & latch attachment, post cleanup, aesthetically like the front fence. - Experience => Gate/fence installation (obviously), own tools/safety gear, attention to detail. - Timing => Start in 1-2ish weeks & installer to nominate how many days it’ll take. - Access => Easy via the driveway. - Painting => Excluded. I’ll paint it later. Please no holes I need to bog.

My gate needs to be fixed to open and close

New brass lever latch and handle need to be installed on timber gate. The spindle provided in latch kit is too long and needs to be cut back to fit. All screws and fittings are supplied, gate has been prepped

Looking for a carpenter to build/replace two timber gates. Dimension is 160cm wide x 80cm high (there are two existing posts). Dimension for second gate (brown one in photo) is 140cm wide (jamb to jamb) x 110cm high. Need the job done in early Oct.

I need someone to supply and install a timber gate with a post in the back fence. The job also includes restraining/adjusting the fence if required so the gate is secure and we can easily access the back paddock. Requirements: • Provide and fit a sturdy timber gate + post • Ensure proper alignment and secure fitting • Adjust/restrain fence if needed for smooth access • Must bring own tools and materials Location: [Your suburb, NSW] Timing: Flexible, ideally within the next 1–2 weeks Budget: Open to quotes

An existing timber gate needs some centre panels replaced and to gate to be sanded back ready for repainting. The gate is solid on except for a few centre panels that have had wet rot and need replacing.

1. Supply & Install 1500mm X 1000mm timber picket single leaf gate material treated pine 2. Supply & Install 1200mm x 1000mm timber picket single leaf gate material treated pine 3. Supply and install 1200mm high x 2000mm length timber picket fence material treated pine. The photos are for reference: - one gate will go where the blue gate is (blue gate will already be removed.) - the other photo of the empty space is where the smaller gate will go and fence running next to it behind garden.

We need the front wooden gate cleaned thoroughly while ensuring the wood is protected and not damaged in the process. Please follow these guidelines: • Use a mild, wood-safe cleaner (avoid bleach or harsh chemicals that may strip the wood or affect any existing sealant). • If using a pressure washer, keep it on a low-pressure setting to avoid damaging the wood grain. • Focus on removing dirt, mildew, and discoloration, especially around joints and lower panels. • Rinse thoroughly and allow the gate to dry completely.

A small treated pine timber gate , less than 1 x metre by 1 x metre with galvanised hinges. Not more than 5mm gap surrounding the gate and the brick wall, and not less than 5mm between pine palings.

Want to add a timber gate to the top of our deck stairs. Simple is fine - something that will blend in with the deck. We can oil it later. Hoping for someone who can source the materials/hardware, build it to fit, and install it. The gap between the stair posts is 101cm wide, and from floor to top of the post is 102.5cm tall. Open to quotes! Please factor in materials into your quote. I've attached an image of our deck (no gate), and a sample photo of a gate that has the features we're looking for - simple, timber, with a latch.

Timber pane side gate requires sanding and repainting. Price quoted to include products required.