Find an experienced gas fitter in Inner South Melbourne

Disconnect and cap off water and gas lines to kitchen renovation $500 (plus airtakser 20% = $600) Job Title: Licensed Plumber & Gasfitter Required: Kitchen Disconnect, Cap-Off & Final Fit-Off (Split-Shift) Job Description: Seeking a licensed plumber and gasfitter for a split-shift kitchen renovation project. Must be able to provide mandatory compliance certificates/sign-offs upon completion. Disconnection & Cap-Off - est Thurs 18th / Friday 19th June Disconnection and safe isolation of water, gas, and power lines prior to structural removal. Safely isolate, disconnect, and cap off the water lines to the existing kitchen sink and dishwasher. Safely disconnect and cap off the gas line from the existing cooker. Note: Existing cooker is a gas cooktop with an electric oven. Installation & Fit-Off (Approx. 4–5 days later) Return once new IKEA cabinetry and benchtops are built to complete the physical installation, housing fit-off, and connections for: 1 x Insert kitchen sink and mixer tap 1 x Standard dishwasher (freestanding) 1 x Gas cooktop 1 x Electric pyrolytic under-bench oven 1 x integrated rangehood - wanting ducting to go vertical from rangehood via cut out at top of cabinet directly above rangehood then back to flue. Photos: Please see attached Requirements: Please confirm your availability for both stages (separated by approx week) and ensure your quote includes the cost of rubbish removal/disposal fees and compliance certificates

I need someone (with experience) to connect my gas bottle (CGA320 head) to my soda stream (TR21-4 female). I have the hose and necessary implements. Every time I connect it, the gas bottle just leaks C02 and doesn't pass through the hose. Rendering it all useless. Not really sure what I'm doing wrong. The deliverable must be the fully functioning connected gas bottle to the soda stream. I'm happy to pay for any extra parts required.

Looking for a fully qualified, licensed gasfitter to handle a gas pipe relocation and the installation of a second-hand Heat & Glo SL-550TRS-AUC heater and flue. Strictly for gas plumbing, installation, and compliance sign-off. Scope of Work: Gas Line Relocation: Decommission an existing wall furnace gas supply. Relocate the gas line ~4m through framework to the new heater location (underfloor access available via a door in the same room). Flue Inspection & Installation: Inspect a supplied second-hand vertical balanced flue kit to ensure compliance and completeness. Run it through a single-level ceiling and penetrate a standard concrete tile roof, installing correct weatherproof flashing. Commissioning: Connect the gas line, pressure test, and commission the fireplace (pilot, burners, 3-speed fan, remote). Site Conditions: Property: Single-level residential home, concrete tile roof. Access: Wide-open access to the skeleton timber stud frame before front non-combustible face boards are closed up. Power: 240V GPO will be pre-installed inside the cavity. Assistance: Owner will be onsite to provide a second pair of hands to help reduce your labor costs. Requirements: Must hold a current, valid Licensed Plumber & Gasfitter registration with Type A Gas Appliance endorsements. Must provide an official Certificate of Compliance (Gas Safety Certificate) upon completion. Must bring all own tools, roof safety gear, and standard consumables (copper/PEX-AL-PEX, fittings, sealant). Please Reply With: Your total quote/offer for the scope of work. Your earliest availability to complete the job. Confirmation that you are satisfied to inspect the second-hand flue onsite prior to installation.

Looking for a licensed plumber and electrician (or a team capable of both trades) to carry out works associated with a new kitchen installation in Mordialloc. The kitchen layout will remain largely unchanged, with the sink, oven, cooktop and dishwasher staying substantially in their current locations. Electrical works: - Disconnect existing appliances during demolition. - Supply and install a dedicated circuit from the switchboard for a new induction cooktop. - Wire and connect the induction cooktop. - Reconnect existing electric oven. - Relocate or install any required power points. - Test and provide compliance certificates. Plumbing / Gas works: - Disconnect and permanently cap the existing gas line to the cooktop. - Install and connect the new sink and mixer tap. - Reconnect dishwasher. - Carry out any minor plumbing adjustments required to suit the new cabinetry. - Test and certify works where required. The work will need to be completed in stages and coordinated with the kitchen installers: - Initial disconnects during demolition. - Rough-in after old kitchen removal. - Final fit-off after cabinets and benchtops are installed. Kitchen installation dates are currently TBA, so some flexibility will be required. Please quote only if suitably licensed and insured. Experience working alongside kitchen installers is preferred. Location: Mordialloc, VIC.

The gas cannot ignite. May also check if there is any gas leakage

Fix gas top clicking noise

Looking for a registered/licensed gas fitter or appliance technician to inspect and repair my gas cooktop. Occasionally when igniting a burner with a lighter, a large flame appears before it lights properly. Occurs more frequently with the larger elements. Would like someone experienced with gas appliances to assess and fix the issue safely. Please provide licence details and reasonable quote. Located in Cheltenham Availability: Flexible but asap

The gas ignition won't go off

Supply and Installation of gas isolation valve for freestanding for existing cooker

Supply and Installation of gas isolation valve for existing freestanding cooker

Looking for a licensed gas plumber to cap off and decommission our contemporary open gas fireplace. Ideally if you can also support with the removal of the externally-mounted flue fan. Photos attached. Let me know if you have questions. I'm open to agreeing an hourly rate if that's easier than a fixed-price quote.

I have purchased the barbecue (https://www.harveynorman.com.au/beefeater-1600-5-burner-built-in-bbq-stainless-steel.html?gclsrc=aw.ds&gad_source=1&gad_campaignid=12122924317&gbraid=0AAAAADnx7prX9eaw73eYy6es_95hudjqd&gclid=Cj0KCQjwh-HPBhCIARIsAC0p3ceOSKeTsq-wItiwMv5w_wz-5HO4ynGJ72BIN0T1QJgBUy_TW6z6yMEaAohKEALw_wcB) and looking for fixing in the alfresco. I already have; > gas connection > Natural GAS to LPG conversion Kit > Holes in the stone and bench Looking for certified plumber to come and fixBBQJob

Hi I’m looking for a gas technician to fix the gas line in my shop kitchen. Because my gas not working at the moment need to fix it soon for cooking at the kitchen

Need gas safety check done by holder of gas licence and have a gas type A service certificate qualification. Provide report to real estate agent. After this initial report, will be for two properties going forward annually.

I need to change the thermocouple of 3 gas stove burners

One of the Oak burner is not working as the gas flow is not coming and one burner in 4 burner gas stove is also not working normal general service needed.

There is a copper gas pipe sticking out of the ground already, it just needs to be fitted off with a shut off valve and hose to connect my BBQ to it

There used to be an old gas heater in the living room area. The heater was removed but the gas pipeline coming from the exterior of the house was left in place. I would like to remove this piece of pipeline and have it plugged. Please see the piece of pipe on the external wall. Would like to cut it flush to brick wall, remove part of the buried portion and plug it. Also seal with Silicone the portion of the pipe that will be left at the brick wall. A plumber certificate is also required being a gas installation.

I need my gas stove disconnected. The pipe can be capped as I am putting in an induction. Easy access under cupboard

I need a liscenced plumber to remove my old bbq and plumb in the new one. They are exactly the same . Ziegler&Brown turbo classic 4 burner. Built in.