Find a local floorboard profesional in Inner South Melbourne

Looking for an experienced floorboard installer to replace 1–2 damaged timber floorboards in our living room. • We have spare boards (not full length), or can use boards from the pantry for a better match • Experience with floorboard patching and blending required • Careful workmanship & tools needed to ensure a neat finish Timing: Prefer completion by Tuesday 24 March. Please include your experience and quote. Thank you.

I need a handyman or carpenter to replace some floorboards. I have a photo of the current floor, and I want to replace them with similar wood planks. The goal is to match the existing look as closely as possible

I need 6 of these duct holes repaired. Finished and polished to match surround.

We have a few gaps between our floating floorboards that needs to be fixed and a corner needs to be caulked

Lay floating floor in 3 bedrooms at a supported residential facility approx 50 metres squared Would need the job measured. We will supply flooring etc unless you have good deals you can get on flooring Need to have experience laying floors.

10 to 12 SERFLOOR Hybrid/SFC 109/1800x228x7 mm boards require replacement. I have opened 3 boards but was unable to place the new ones correctly. Can't seem to solve the puzzle. lip side are to be cut for perfect fit and i couldnt get it done. I have the replacement boards. I need someone to do a pro job in replacement. The older board got bend due to uneven concrete level ad seen in the photo. I didn't want to use leveling concrete to keep the area tidy so got a box of packers. The solution seems to work but im ok to follow advise of the pro to resolve the issue related to uneven concrete. The budget is kept at $100 to get counter offers

I need to get the sanding and polishing of the floor boards on 3 bedroom’s. Please see the dimensions of the rooms in the attached pic.

Hi I have some floorboards that have popped up due to leaks. Need these fixed. No need for painting on skirting after. Need invoice. Open to rates

Replace up to 3 damaged boards by cut-out method (no full lift). Engineered timber floating floor tongue and groove. New matching boards supplied. Minimal disturbance to surrounding boards and skirting board required. Fit and glue with flexible adhesive the new ones in place. ***Note: Flooring repair experience is required for this job.

I have three baltic pine floorboards that need to be replaced - 150mm wide. I would like the replacements boards already sanded and polished. I also need 15 central heating ducts covered with Baltic pine flooring.

I am after supply and install of some floor boards in a room 3.9 x 3.7 meters..

Old Dishwasher has rotted the floorboards. I have the floorboards to replace them with, just needing to be cleaned up and replaced.

Rotten fascias approximately 1200x5000 need to be removed and replaced with new boards.

I have an existing timber deck built very tightly around a mature elm tree. The boards are cut hard up against the trunk and I’d like them adjusted to allow proper clearance for tree growth and movement. Scope of work: - Carefully cut back deck boards around the tree to create a clean expansion gap - Gap to be neat, intentional, and symmetrical (not rough cut) - Ensure no damage to the tree or surrounding deck structure - Deck is already built – this is an adjustment, not a new deck Important details: - Tree is established and alive – must be treated carefully - Looking for someone experienced with decks / carpentry (not a general handyman guessing) - Finish should look architectural and intentional No structural changes required (unless you advise otherwise) Location: Glen Iris, VIC Timing: Flexible, but preferably within the next couple of weeks Photos: Photos attached show current clearance around the trunk Please include: Your experience with deck modifications Any similar work you’ve done (photos welcome) Your availability

Approx 2m section of floorboards to be sanded and varnished

Timber along front of house has weathered. Boards to be re- affixed or replaced if required. Older home - repairs / make safe for renters.

Due to a leaky fridge I have one or two warped floorboards to repair. Not a massive surface area by any means but enough to notice

I need two floorboards fixed.

Our deck has enclosed sides using Ecodeck. We need to create a manhole to gain access underneath. This requires 3 boards to be sawn in-place, approximately as shown by the tape-measure in the third photo. Probably using a sabre-saw or a small plunge-saw. It needs to be neat and accurate, then I can take it from there.

Lay vinyl plank floorboards in two bedrooms kitchen area and living area for a granny flat approximately 36m2, need done Sunday