241 Wood Fence Experts Near You

We are looking to have 2 gates installed off the sides of our house.

A couple of pailings have been pushed out on front gate. Also a loose Pailing on the fence to be repaired

Need you to replace and repair the wooden gate.

I need someone to come by and patch/repair holes in my wooden fences so that our dog doesn't escape our back yard.

Wooden fence needs to be taken down. See pics

4 panels need replacing in gate. I have the 4 pine panels but they need trimming to size and one of them needs to be cut in half lengthways.

Invitation to quote on installing a wooden gate at the side of my property. See pics attached. Note I don't know the exact measurements so task will involve visiting property to measure and advise what size gate I'll need (I will purchase the gate, latch and any other materials). You will need to collect gate and materials from Bunnings and install at property. Pls submit an estimated quote or message me and I'll provide you the address in Victoria Park. Please include the text "I have read and understand the task requirements" in your quote message. Many thanks, Leigh

Scope of Work Repair (finishes at first large tree & excludes smaller sections of fence either side of large trees) “Fill & Roll” 27.9 metres of existing brushwood fencing including gate. Fill & Roll – to remove old roll top and dispose of at tip. To add and thatch new brushwood to the top of the fence on both sides, re tension top wire only and replace tension clips. Install a black PVC water proof membrane that sits on top of the fence, but underneath the roll top. This membrane helps protects the top of the fence giving it better longevity. Install a new hand crafted brushwood roll top. To supply and install new base plate to prevent brushwood from dropping. To “Bottom Fill” existing brushwood gate. Bottom Fill – to add and thatch new brushwood to the base of the gate on both sides, re tension bottom wire, replace tension clips, and then trim neatly. New To remove 3.7 meters of existing double gates and dispose of at tip. To install a total of 3.7 meters of new brushwood fencing panels at existing height. To install a black PVC water proof membrane that sits on top of the fence, but underneath the roll top. This membrane helps protects the top of the fence giving it better longevity. New brushwood fence includes a hand crafted brushwood roll top. New brushwood fence will have a single H4 treated pine timber base for the fence to sit on; this prevents moisture rising up into the fence giving it better longevity. All new galvanized posts will be capped to prevent them from filling up with water. In addition all galvanized posts will be rolled and dressed in brushwood to disguise. All rubbish disposed of at tip. Includes all tip fees. Site to be left clean and tidy

Build a 15m chest high front garden wooden fence & double gate for car entry. Made of pine. Standard not overlapped. Must be build around brick letter box. Paint it white.

Need to paint wood fence and mesh. Mesh 5.5 x 1.1 meters Fence 28 m long Wood Gate

I require a wooden side gate installed in Clyde. You will need to provide the gate and install it. There is timber fence on one side (1.95 H) and the other side is the side of the brick house. The size of the space is 1.4 metres wide.

Looking to create a gate in an existing wood fence. Ideally to open from the inside. Gate can be created from the existing fence so it looks seamless from the outside (locks etc on the inside). This will probably mean you will need to cut the existing fence. Reasonable width required around 1.2m but flexible if there are constraints. Quote please include materials eg. Hinges or lock mechanisms. At minimum a extra post is required and some sort of steel frame internally. Suggestions welcomed otherwise. Anything else please state in offer and if its included or not. Please see attached pictures.

I have a steel fence that’s come off at a couple of spots from the wooden fence behind .. needs to be screwed back to the wooden fence Less than half hr job

I need a lockable gate (from both sides) put into the existing wooden fence. The wooden fence is on top of brickwork. Job is in Dunlop ACT. I need the lock and gate supplied as well.

I have bought 3 fence panels and 6 galvanised posts which will cover roughly 7.5 meter in length of the total 9.5 meter. So one extra 2 meter panel need to be provided.My old posts are not that good so have to replace those with galvanised ones. So need someone to dig 6 posts (40x40) in between to install those fences. So it would be mainly the labour for digging the posts, installing the panels with one extra panels.

A section of the side wooden fence; 2 panels of approx 2.5m each, was remove during construction work. Now they need to be reinstalled.

I need wooden post/ batten fence repaired. It is approx6-7ft tall.. runs along laneway at rear property. The posts have come away from cross battens in several places. Needs aligning with clamps & bolted? Please quote & method of fixing. I posted this yesterday but has lost in cyberspace??? No timeframe or not sure on cost but assume approx $150 reasonable?

My little courtyard has bamboo fencing that needs to be nailed in properly, it should take about 10-20 mins

Hey there, my name is Tristan. I need to hire a handyperson to help me in Mount Martha VIC, Australia. What do you need done? Carpentry What is the type of property? House Which areas of the property need work? Verandah post What would you like the handyperson to work on? There's a wood post on the verandah that is rotten and needs replacing.

Wooden fence and pedestrian access gate installation. Height of fence is 1.2m, fence would be double batted with colonial posts on top. 12m with 2m return. Total length is 14m Max excluding pedestrian gate lenght