Find experienced local fencing contractors in NSW

Build & paint timber paling fence We are looking to get a timber paling fence built at the end of our garden. • Dimensions: approx. 6 metres wide x 3–4 metres high • Style: lapped & capped paling fence (flat along the top) • Height to match the highest point on the left-hand side • Fence to be painted white to match the rendered side walls (we can provide paint if required) • Built with treated timber suitable for outdoor use • Timing: ideally within the next couple of weeks (sooner the better)

Need 13-15 metres of timber fencing installed. 1.8-2 metres in height. Will be mounted on top of a low brick wall; requires core holes drilled and galvanised metal posts into brick wall. Current bamboo screen will be removed.

Garden fence to be installed in the front of the property total length is 7.45m long x 1.2m high with 0.5m return.

I have a fencing job I'd like to have completed and. I'd like to replace 4 green fake panels and have something similar to the wooden panel out in its place. 3 large panels size 240cm x 90cm and 1 small panel 90cm x 94cm. The wooden panels in that photos are examples of what I would like to have replace the green sections of that current fencing. Budget is for time only. I will pay for material as you may quote to build the wooden panels or source them already made to fit the fence. I don’t mind either way. Many thanks. Paul.

I bought these panels and want someone to help me to add them to the existing fence.

I want help installing a garden fence. Need to look nice and secure. Length 10m including gate Height 1.2m

I want new fence and gate for my garden.

Need to remove the existing fence and install new Timber fencing Approximately 17 meters of length

Require experience with pool fence certification. A few small fixes around the pool fence. Will require a trip to Bunnings at Dural for wood section and stake and maybe screws. Ideally a handyman/gardener with experience meeting pool compliance rules: - use a shovel to level out the ground under pool fence in 4 small some sections of fence, where the ground is too high. - hammer wooden stake/plank in one small section (50cm section) where gap under fence is too large - check around the fence for any loose screws. See images of the pool certification fixes needed. Should take 1 hour.

21.5 in Length Need new metal posts with timber sleepers

Looking for a reliable gardener/handyman to help cover a small gap between the fence and the ground using chicken wire. The gap ranges from about 0.5 inches to 2 inches along the base of the fence. • Estimated time: 2 to 3 hours • Happy to pay $50/hour Please reach out if you’re experienced with similar work and available. Thanks!

I just need an extra fence built in for privacy but more for my pet dog, something not to pricey but secure it would be medium height the person who accepts this job either must supply the fence or I can give extra funds so they are able to buy the fence must come out and do measurements first before picking a fence, can also upload some pictures to give you a rough idea please and thank you

Hi there, We have just rendered and painted our external wall and had to remove our garden gate in the process. We have restored the gate and now want to reinstall. The brackets are very old so we may need to buy new hardware and a lockable latch. We are away and have Airbnb guests coming Sunday. We would love for you to go and look at the gate to see what hardware is needed, then go to Bunnings to purchase, the come back to install. We will of course pay for the required hardware. Would love for you to install tomorrow :-)

I have two panels of Stratco Quickscreen to be installed at 90 degrees to each other adjoining an existing timber fence. The site is sloping and will require 3 post holes to 600mm. We need to screen neighbours bins. I will provide all materials

Repair small concrete pillar and fence in front yard. See pictures. 1 picture is from street view before the damages.

Fix my fence it got came off because of heavy wind

Install the front gate - Gate will be supplied just need installation and concrete to be poured. Cash in hand job no need invoice Quotation only by guess

Bring garden wire and screws/all materials including ladder Attach wire to facade, length approx 3.4m Trail climber through Height from ground approx 4.3m

Build and install lattice, trim away current hedging in the way.

We need a section of garden fence replaced as it is falling down. Circa 27.5 lineal meters. 1.8m high pails required.

2 sides attach to wooden fence and cat enclosure to secure a pitbull

We have a fence at the front and at the side but the dog is escaping through the garden area in between. We need someone to inspect, buy the appropriate product from Bunnings and secure the area by running wire fencing from one fence to the other.

I need help remove the fence.

Ordered a pre fabricated aluminium fence, install on concrete terrace, require tools to install Dyna bolt posts into concrete

Supply ( I’m happy to buy it under advice) and fitting of strong mesh on verandas to fence off, contain dog to one area and stop dog jumping over railing. Approx measurements 4.5 m by 2.5 . By 2.5. Ideally would like this set up to be easy to put up take down.

We have a small outdoor area which we would like secured for our dog. Am putting $5 in budget as not sure at all of a price yet.

I will need to have a wire barrier installed underneath the house, to keep the dogs from getting out. I have two metal gates which might be good option, they will need to cut to size. It will need to be secured to the piers.

hey just need a fence/cage built for my dog, all instructions and materials all included

I just need an extra fence built in for privacy but more for my pet dog, something not to pricey but secure it would be medium height the person who accepts this job either must supply the fence or I can give extra funds so they are able to buy the fence must come out and do measurements first before picking a fence, can also upload some pictures to give you a rough idea please and thank you

Need a dog gate installed outside on right side of the house in front of a big manual gate..width of gate is 130cm...can be just screwed on type of gate or no drill type. Will need handyman to purchase and install the gate.

Job Details: • Fence 1: Straight panel, approx. 1.5m wide • Fence 2: L-shaped, approx. 2.4m x 1.2m • Each enclosure needs one entry gate • Must include painting/staining in light natural timber colour (we can provide paint/stain or reimburse if needed) • you need to buy materials • Installation to be done at our premises (address will be shared with the assigned Tasker) Requirements: • Experience with timber fencing or carpentry • Must bring your own tools • Attention to detail and clean workmanship • Must complete both enclosures securely and safely for pets

Build an enclosure for dog * Fencing [ colour bond ] * Fences blocking each side of house and stairs * All doors of Fences must have self locking lock * Install roof of enclosure *The whole fence around yard needs to be blocked at the bottom with timber or bricks

There is a 2-3m gap in fence, one .5M and another by side of house that need dog proofing. Supplied steel posts and chicken wire. Photo shows part of fence already there and the gap. Cushions on gap. Flexible timing but prefer sooner rather than later.

I need to get an in ground dog wired boundary fence installed around our house yard approx 300m total

I have no back fence and it is just bush. My dog keeps running to explore.. I have purchased the dog wire and all stakes. It is a ten meter fence required to be put up.

The current gate is closing a gap measuring 870mm wall to wall. The hinges are attached to a piece of 4x2 which narrows the gap to 810mm but leaves a gap at the bottom of the gate, big enough for the dog to get through. (see pics). The gate can be from 1500mm to 1600mm. The current gate is not sound and I'd like to replace it.

Needing to create a gated area for my dog which can keep him secured in a section on the property.

Hi my dogs have dug under my colorbond fence and escaped I'm needing help to block it off so they can't get out please

I have Houdini dogs and have just noticed that a fence panel is loose. Need the panel fixed - doesn’t need replacement.

I have about 20 holes in Brushwood Fencing that I need patched. The holes are caused from dogs and foxes. I need the holes patched with brushwood or alternative. The Patch only needs to last about 12 months until the entire fence is replaced. Attached are some example photos. Job in West Pennant Hills

install colour bond gate. materials provided. cutting tools and drill required

29 meters of colourbond fencing. plus two gates 1.9m (total width 3.8m) all 1.8m high

Existing gate needs new post and lock

Hi I have a side access gate made of colourbond 2m high by about 1m wide. The latch has come away and needs to be re fitted ( with rivets I expect)

I have Colorbond fencing installed, but there are visible gaps between two fence sheets (as shown in the photo). I am looking for someone experienced with Colorbond fencing to: • Supply and install cut-to-size Colorbond sheets to properly fill the gaps. • Install the necessary rails so the fence looks neat, strong, and professionally finished. • Ensure the repair matches the existing Colorbond fence style and colour. Please provide a quote including labour and materials. Job is straightforward but requires proper cutting, fitting, and attention to detail.

My Colorbond fence gate is damaged at the joints and needs repair. Seeking someone experienced with Colorbond fencing who can repair it properly and make it sturdy again. Requirements: Experience repairing Colorbond gates/fences Own tools preferred Reliable, efficient, and neat work Please provide a quote and availability. Quick turnaround preferred!

Previously broken colorbond fence was not repaired properly and is now leaning.

Colorbond fence 37m . Three gates please

Stall a lockable latch on colourbond fence gate. I will purchase the lock. Lock will be D&D Technologies Lokklatch Deluxe S3 Gate Latch

A colourbond gate has fallen and needs repairing with new sheets and posts

Fix star pickets into ground and reattach two colourbond fence panels

I need my 4 colourbond fence panels at the back straightened out - currently they’re slanting. May need 1 or 2 posts sorted out (in that case I can supply 2 x 20kg bags cement) but this might not be needed and you might want to check during inspection. I also have approx 2m of colourbond fencing needed at the front to be installed to the brickwork- would require you to supply the material and I can reimburse for it. Please quote for your labour to fix the back 4 panels and install 2 colourbond fence panels at the front including the materials.

Colorbond fence gate collapse after strong wind. Reuse existing frames and sheets since it is still in good condition. Screws all gone and need to be replaced. Reattached the gate.

leaning colourbond fence

Hi, I’m looking for someone experienced in bricklaying and fencing (Colorbond) to inspect a boundary fence that’s currently being rebuilt between our property and the neighbour’s. The rebuild includes both a brick base and Colorbond panels. The job was arranged between the neighbour, my brother, and my ex (carpenter) — but I wasn’t part of the agreement or planning process. Now that the work is underway, our side looks: • Mismatched (bricks don’t line up or match existing ones) • Uneven and rushed compared to the neighbour’s • Potentially unsafe or not up to a proper standard I’d like someone to: • Inspect our side only (no access to neighbour’s required) • Check for any faults: poor alignment, uneven footing, rough bricklaying, etc. • Let me know if the job was done fairly, safely, and up to standard • Provide a short written summary + photos for documentation This is for peace of mind and clarity, so I can decide what to do next if necessary. Need someone flexible with timing, even if workers are still on-site. Budget: $60–$100 Open to offers within this range depending on experience & detail level. I’ve attached a couple of photos for reference — not the full job, just key sections to highlight visible issues. The rest has been left out to protect privacy. More details can be discussed after acceptance.

Need infill sheet replaced for colorbond gate. 2.8m W x 1.8m H. Install drop bolt, safety latch keyed lock. Gate to be raised by 50-60mm while refixing. End posts, stiles, frames etc are all reusable.

30 metre of colour bond fence installed and supplied (1800 high in monument)

Hi there – please see pics attached! I want to match my left-hand front fence to the right. This would involve: 1. Relocating the ‘sloped’ panel to the front. 2. Replacing the 4 x existing panels with higher ones. The dimensions of the panels I want to replace my current ones with, are approx.. 187cm high and 237cm wide. See pic attached/below!! *note: I have since had an arborist remove the overhanging branches in the pics, so there is clear access to install now. ****happy to discuss costs, $1k is just placeholder****

I have a milkcan 13line clothesline that needs to be installed onto my colourbond fence