Find a fence installation professional in Yatala SA

Build a new fence. Length 3.6 m height 1.5 m . To partition dogs from the back

Supply and Install NEW Side gate with post and d latch. Approx 1150mm wide

Remove and dispose of grass fence and replace with colorbond/ good neighbour fence 24 metres

Colorbond single fence gate to be installed on side of property. Dimensions are 885mm x 2000mm. There’s currently one DIY installed, but is now almost not functional.

I need someone to repair or replace the latches on two external gates that provide access to electricity and gas meters. The current latches were poorly installed by the building developer and are very difficult to use — the gates often stick and require force to open or close. Access is straightforward and timing can be flexible. Please quote including labour and any parts if possible.

Install a new gate latch to an existing steel Gate

Need Sliding gate to be installed, Gate need to be as per following 1. Height 1.5 meter with top of the vertical slats pointed/spikes 2. gate length 5.9 meter 3. Vertical slats width -to be standard - low budget 4. Distance between standard vertical slats to be 120mm Need estimate for motorized and non motorized /manual gate. Supply for the motor will be arranged by me up to motor point. My expected price quoted here is slightly negotiable.

We have a commercial building and need 2.4mt security fence without gate

Hi there! I’m looking for an experienced fencing installer to replace my current horizontal timber slat front fence with a powder‑coated aluminium slat fence in a similar style. Location Woodville West Access Easy, flat frontage, no obstructions. Scope: - remove and dispose of existing timber fence - supply and install aluminium slat fence (approx. 6–8 metres) - supply and install matching pedestrian gate - posts + concrete footings - standard powder‑coated finish (no wood‑look required) - straightforward install, no height changes or tricky angles What I can provide: - photos of the current fence - measurements if needed - flexible timing for install Looking for: - someone experienced with aluminium slat systems - clean workmanship - clear communication - a fair, transparent quote Happy to answer any questions or arrange a quick site look if needed. Thanks! Rebecca

I’m seeking a handyman or carpenter to supply and install the following: 3 × H4 treated pine posts, 100×100mm, 3.0m long Posts to be concreted into the ground (~800–900mm deep) Finished height to suit ~2.2m fencing Top and bottom timber rails between posts Galvanised chicken wire / aviary mesh, fixed tight and neat 1 × custom-made timber hinged gate Approx. 1500mm high × 800–900mm wide Timber frame with diagonal brace Galvanised hinges and latch supplied and installed All materials, concrete, fixings, labour, and installation included Notes / Quality Expectations: No staining or painting required H4 posts minimum Gate to be braced correctly and swing freely Wire to be tensioned and fixed neatly Example Photo Provided

Wanting a small/medium height aluminium picket styled fence installed in our front garden. Monument colour to match the exterior of our house. We estimate the length is likely between 15-20 metres and will require two small gates at the entry points of the property. Would like someone to come and measure area and provide quote for products and labour. Price negotiable. Located in Greenwith. Photo taken from Google of fence - cannot find an exact photo of what we would like but something similar to pictured.

Photo attached . Fence was damaged by outsiders and needs to be repaired and partially replaced

I’ve got a Stratco Ezislat gate (1100mm wide) already assembled — just need someone who knows what they’re doing to install it properly. Job includes: Remove one paver Concrete one post into the ground Fix the second post to a Hebel wall Fit hinges + lock Make sure the gate swings clean, straight, and solid I supply: All materials. You supply: Tools, skills, and a track record that doesn’t make me nervous. If you’re handy, reliable, and have good feedback, this will be an easy win.

Hi, this task is to replace my side gates,both at the left and right of my house. I have purchased the gates. The poles of the existing gates may need to be cut out. I want the poles of the new gates to he cemented so that they are firm and steady. Please let me know if you need more information. Thanks.

Install about 13 length of good Neighbour fencing panels and concrete plinths.

We need wire installed on the back fence to train the plants we have purchased to climb up the fence. Type of gardening: Other Size of garden: Under 50m² Has green waste bin: Yes

Hi i need someone to remove and install new good neighbour fence. Please give me your rate how much you charge per meter , supply and install. Total is about 60m

Need a concrete sleeper retaining wall built on the front of our property between us and our neighbours. Will require a surveyor first. Roughly 2-4 concrete sleepers wide and 4-6 sleepers tall, with a 1.6-1.8m colorbond fence installed on top.

Colour bond fence rusted replace bottom 2 x 2.4m horizontal posts , 2 x 2.1 vertical posts and reset into ground with concrete . Fence sheets ok to use. Woodland grey.

I want to hire a professional to do the colourbond fence in front yard. I need sliding gate automation, pedestrian gate 1.2m and mail box.