Find a fence installation professional in West Adelaide

Supply and install 15 meter colour bond fence

Six Screenline Fence Extensions to be installed across colourbond fence.

Looking for someone to install a LockMaster EKD700M Dual Swing Gate Opener onto our existing double swing gates. The opener was purchased around 5 years ago but has never been installed, it has remained in storage since purchase. The job includes: Installing the gate opener onto the existing gates. Installing the control box and motors. Programming the remotes and testing the system. Letting me know if any additional brackets, posts or mounting hardware are required to suit the existing gates (happy to discuss additional material costs if needed). Please quote for labour only. Happy to provide photos of the gates if required.

we need 25 metres of colorbond good neighbour fencing installed 1800mm high with concrete plinths. Removal of old fence

Scope of Works * Supply and install 60 linear metres of Good Neighbour fencing * Include aluminium plinths throughout * 80% of the fence line is over dirt and grass * 20% of the fence line is over existing concrete * Easy access residential property * Not a boundary fence (so no neighbour contribution/coordination required) * No gates required Site Conditions For pricing purposes, this means: * Around 48 metres of standard post installation into soil. * Around 12 metres requiring fixing through existing concrete, which generally attracts a premium due to core drilling or base-plated posts. * Aluminium plinths are required along the full 60 m.

Looking for someone to install a fence in Richmond. Includes a double-swing carport gate and single gate to align with front door of the property. Approx 15 metres of fencing in total including the gates. Gates, fence paneling and posts will all be supplied. Fence supplier (Future Fence) is more than happy to answer any queries about install. They have been incredibly helpful to date too. Exisiting fence will be removed so site will be ready for install.

Need new colourbond fence supplied and installed.approx 19.23m in length. Also need to remove and dispose the old fence.

Looking for quotes to supply and install automatic swing gates for residential driveway. 1. 4.5m wide x ∼1.8m high 2. Double swing, 2 x 2.25m leaves. Colorbond or aluminium slat infill, black frame preferred 3. Quality kit like BFT/Nice/FAAC with 2 remotes, keypad, safety photo eyes, battery backup 4. Supply + pour concrete footings for steel posts. Run 240V power ∼8m from house. Trenching under pavers may be required 5. Must meet AS/NZS 60335.2.103. Licensed + insured only Flat driveway, good access. Existing fence either side. Please provide itemized quote incl GST covering gates, automation, footings, electrical, and any provisional sums. Site visit preferred for accurate pricing.

Needing a quote for a replacement fence

Supply install side fence replacement Colour bond Surf Mist

Installation of an automatic sliding gate. Will need the gate built same as existing fence and electrical run back to box approx 8m for power for the gate. May need some additional concrete slab to support roller. Also open to ideas from a professional.

I am needing someone to install a baby gate (for a dog) in my hallway - I have most of the material just need it installed

Need good neighbour fence post replaced. I have post,cement and all the screws.

Install over existing fence. 1.8m x 8.6m Will need tools to cut fence in half (it comes in 3.6m)

Build a new fence. Length 3.6 m height 1.5 m . To partition dogs from the back

Remove and dispose of grass fence and replace with colorbond/ good neighbour fence 24 metres

We need to install the attached roll over gate at a construction site at Wingfield The location does have a 6m fall to consider and there is an EWP on site. Are you available this week to install? It will be a 2 personal install. It's a construction site, so will need construction card and EWP licences to work at this height. I have a pdf showing install instructions that can be sent.

Install a new gate latch to an existing steel Gate

Need 35m of good neighbour fence 2.1m Dismantle and removal of existing fence

Hi there! I’m looking for an experienced fencing installer to replace my current horizontal timber slat front fence with a powder‑coated aluminium slat fence in a similar style. Location Woodville West Access Easy, flat frontage, no obstructions. Scope: - remove and dispose of existing timber fence - supply and install aluminium slat fence (approx. 6–8 metres) - supply and install matching pedestrian gate - posts + concrete footings - standard powder‑coated finish (no wood‑look required) - straightforward install, no height changes or tricky angles What I can provide: - photos of the current fence - measurements if needed - flexible timing for install Looking for: - someone experienced with aluminium slat systems - clean workmanship - clear communication - a fair, transparent quote Happy to answer any questions or arrange a quick site look if needed. Thanks! Rebecca