Find a fence installation professional in South East Perth

I am looking for a handyman or tradesperson to install a self-closing spring or hinges and a latch on a garden side gate. Job details: • Install a spring for self-closing function on garden side door • Install/adjust hinges as required • Ensure the gate closes properly and aligns correctly prefer someone with Own tools and equipment.

Install a colour bond gate at my property

Install PA gate with side panel - colorbond 1.8 high 1.7 width PA gate - approx 1m width Side panel- approx .7m width Belmont area

removal of 1 x pillar and wall section and replaced with colour bond fencing to match the existing colour bond on the neighbouring property. Skip bin and fencing requirements supplied by client.

the fence is rusted out at the bottam needs replacing

I have some old besko glass pool hinges on our pool fence that need to be replaced. I have bought replacement Polaris 130 hinges and I just need them installed.

Build 9m of colourbond fence. All consumables supplied and ready, 2bags of concrete per hole. All colourbond fencing on site ready to be installed. All 4 holes dug already to around 400-500mm might need abit more depends on height alignment of rear fence. Just have ran outta time and need it done to mark my boundary.

Installation of side gate to new build. 940-950mm wide

Needing a small brick wall to be demolished that is already broken and to install a double swing gate. Size is 2.6m x 1.5m. Would want it to be automated but can start with it as a manual gate as well. Would want it to be aluminium wood looking slats

Installation of plinths under a colorbond fence 2 plinths on the first photo and 1 plinth on each of the other 6 photos

I need a pedestrian gate to cover a 1200mm wide gap in a masonry fence. I would like the gate to be around 1600mm to 1800mm tall. Happy for the gate to be aluminium, either a tube or fin style gate, but must be in a dark colour. I would like the gate to be lockable from the inside, but openable from both sides. I would also like self closing hinges. See attached for images of the gap.

The side fence panel need to be re-instated after it fell due to strong winds. The fence panel is 1m wide and 2m long.

Remove existing pool fence and install glass pool fencing. Details: • Remove and dispose of old pool fence • Installation only – glass already purchased • 10mm toughened glass, as-new condition Measurements: • 1 x gate: 890mm (W) x 1160mm (H) • 3 x panels: 1090mm (W) x 1160mm (H) • 3 x panels: 1600mm (W) • 1 x tall panel: 670mm (W) x 1850mm (H) Looking for an experienced installer familiar with glass pool fencing and compliant with Australian pool safety regulations.

Fence blew down in wind. Would like to replace panel with colourbond

The latch on my gate has fallen off. I have glued it for now. But its not going to last long. I am happy if it can be fixed, but ideally I woud like to install the black lock in the pictures.

Had gate removed for driveway restoration now needs to be put back

Remove cement fibre fence and replace with colorbond panels Approx 15 meters

Wind fence installation, I have already bought the fence but materials will need to be purchased for installing the fence, which I will provide. Second part is spreading mulch on the verge in front of the lot. The lot width is 15m and located in piara waters

Remove current metal sheets from gate frame. Paint frame. Replace panels with colour bond sheets.

3 metres width Colourbond gate needs to be replaced with something less expensive. The gates are damaged. This area is prone to high wind.