Find a fence installation professional in South East Melbourne

Replace two side boundary fences with new timber paling fences. Include demolition and removal of existing fences. Scope of Work • Supply and install treated pine timber paling fences. • Total length: – Section 1: 18.5 metres – Section 2: 8.5 metres • Height: 1.95 metres for both sections. • Remove and dispose of existing fence lines. • Install new posts, rails, and palings to standard residential specification. • Include cement footings for all posts. • No capping. • No gates. • No sleepers. • No painting. • Leave sites clean upon completion. Material Requirements • Treated pine palings: 150 x 13 mm and 100 x 13 mm. • Treated pine plinth board: 150 x 25 mm if required for level adjustment. • Treated pine rails: 75 x 50 mm, recessed fitted. • Cypress or hardwood posts: 125 x 75 mm, weather-capped. • Galvanised nails. • Concrete footings. Contractor Requirements • Confirm boundary alignment. • Provide clear timeline and estimated start date. • Provide full written quotation including GST. • State warranty terms for workmanship and materials. • Confirm insurance coverage. • Power and water available onsite if required. • Access required to both sides of fence line, with 500 mm clearance. Quote Format Requested Please supply: • Total price for each fence section separately and combined. • Breakdown of labour, materials, demolition, and disposal. • Deposit required and payment terms. • Estimated number of days to complete.

I have a colorbond fence at the side of my house which I am wanting to transform into a gate. Not sure on budget, wanting to get an idea for costs.

Install new wooden fence 2.6 x 1.8 metres (L x H). Please quote with and without wooden gate. Net on other side is removable.

Build a detached extension in my backyard

Replace current fence with new one. Around 8m.

Hi, looking for a Hebel supply and install on extension project in Dandenong north. Looking for 50mm Hebel The property is 12x8m Attached pics show plan

Fencing company based in Oakleigh looking for an experienced chain mesh fencing contractor for immediate site work. You must be fully experienced in: Installing chain mesh/security fencing Posts, gates, strain wires & stays Working from site plans & measurements Completing jobs with minimal supervision This is a professional, ongoing opportunity. Please do not apply unless you are an experienced installer with commercial project experience.

I have Acoustic panels installed and need to install soundbar (5kg) on the panels.

I need a Side Gate - 1140 mm (Wing + Gate) on the LHS near the meter box and a Side wing- 950 mm on the right side of the Garage installed.

Would like a driveway gate to keep my car in a safe place

supply and install 30m colorbond，2.1m high

Hi, I’m looking for an experienced fencing professional to supply and install a Colourbond fence with a gate on the side of my house. Details: - Total width: 2 metres - Gate width: 1 metre - Material: Colourbond (preferred colour can be discussed) Scope: - Supply all materials - Install fence + gate - Ensure durability, proper alignment, and clean finish Please include in your offer: - Labour + material cost - Any warranty details Looking forward to your quotes. Thanks

as described. Msg me for more details

Approx 6 metres of standard timber fence. Side boundary.

Install new fence with a door. Total about 7.6 metres long. Accessible from inside and outside. Please contact for viewing if required. Thanks.

- install pool barrier and gate total 6m, materials supplied , location : Ashwood VIC , more other odd jobs for fencing and gates, pool compliance job , any add ons can discuss further

Looking for someone experienced to help install two 100x100mm 4.5mt galvanized steel posts to a height of approximately 3.10 metres. Holes will need to be dug and posts concreted in securely Posts and high strength concrete bags will be supplied

We have very old timber fencing with severe wood rot including in the posts. I am keen to get quotes to replace the fencing (25ish metres). Would like 1.9 metre Their recent wind downed part of the fence and we have used star pickets to hold it up. We would also be keen to get some lattice fence topper installed to improve privacy. Happy to negotiate pricing.

I’m looking to replace a damaged front brick fence at my property (see attached photo) with either a Colorbond or timber fence, depending on cost and availability. The total length of the fence is approximately 13–14 metres. Could you please provide a quote for both Colorbond and timber options, including removal of the existing brick fence and installation of the new one?

I have a gate that I need installed 1m x 1m