Find a fence installation professional in South East Perth

Need front fence installed. A fence like in the image approx 20m long and as high as council permits

Pull down, remove and dispose of existing super six (non asbestos) fencing and replace (supply and install) with colorbond in classic cream. Side fence of 14m x 1800mm fencing with a single plinth. Current fence is partially down with remaining part leaning. Must be done before Friday 3 July. Will pay a premium for short notice. Appreciate if you can provide your quote to take this into account. Contractor to be fully licensed with ABN. References or reviews appreciated. Please advise when you can start and complete (sooner the better!)

I am looking for the supply and installation of an Aluminium Slat Gate measuring approximately 1600mm wide x 1800mm high. The existing timber gate opening is approximately 1600mm wide. I also have an existing aluminium gate on the opposite side of the house and would like the lock replaced to match the new gate, so that both gates can be operated using a single key. Please refer to the attached photo for the preferred style and colour scheme: Black Frame with Timber-look slats.

Landscaping and handyman

Looking for someone who can install farm fence, similar to the picture. Quote me labour, invoice for the consumables. The length is approximately 150 meters.

Small cyclone fence supplied and installed, around 400mm high and approximately 10mtr long

To install 87m of 1200mm High pre fab picket fence panels core drilled into limestone wall. Can provide generator, water and core drill if needed. All materials onsite.

Newly built house needs 15m fencing installed at the back and approx 1.2m gate + 0.8m fence on side entries from front

Super 6 panels of fence need to be replaced and new one installed also old fence to be disposed of please quote

Hiace 2021. I have the cargo barrier I need someone who can install it.

I need an experienced aluminium Slat Fence and gate Installer to assist with two jobs. Similar to photo.

I am looking for a reliable Tasker to supply and install fence extensions to increase the height and privacy of my backyard. The current fence is colorbond standard height and I want to add 300mm of extra coverage I want slats with very little gap or solid with no gap which ever is cheaper and durable I need it for 7 panels only

Two decorative slat fence topper panels have detached from a Colorbond fence. Existing mounting brackets appear to remain in place. Panels need to be refitted and secured with suitable metal screws/fasteners. Please supply fixings if required. Photos attached.

property is an apartment block; balustrade fence smashed during storm, needs relacing

Need side aluminium side gate installed. Also install an infill between colorbond fence and brick wall.Total measurements is 2.4metres

Wooden gate needs replacing

We need a chunk of our existing limestone fence knocked down (see pics). We then need a new pillar built to accommodate a new pedestrian gate. This will also need to include a new letterbox and intercom system (we have already). We have a skip on site.

Require new side gate install. Will need supply and removal of old gate. Aiming for something like the photos. Thanks

I want to partially enclose my garage with one large colourbond panel in Grey Ridge. Supply and install needed, suggest site visit to confirm measurements etc. Solid brick wall to one side and post or similar will need to installed into concrete/paver.

Install PA gate with side panel - colorbond 1.8 high 1.7 width PA gate - approx 1m width Side panel- approx .7m width Belmont area