Find a fence installation professional in South East Perth

Supply and fit two Colorbond Steel Fencing Post - Domain 2400mm (retailing for $15 at Bunnings). Disassemble fencing on either side of the rusted-out post. Remove old post. It is already separated from the concrete base. Remove old concrete base and dig out sand. The concrete base looks manageable. Install and level new post with 20kg of concrete (you supply concrete). Wait for curing. Reassemble fence. I will arrange access on either side of the fence.

I need 7m of fencing removed (so my builder can do retaining work) and then 3 weeks later have the fence reinstalled. I have attached photo of actual fence. However, grass, trees and small shed are now gone. I have also attached picture of block with fence to be removed highlighted. I have also attached photo of the type of retaining that will be installed and the fence will need to be reinstalled on top of. Not actual retaining

Fence install 1.8 m hight

Supply and install the following: Colorbond fence - About 31m of 1.8m Colorbond in a straight line from the front of the block to the rear boundary, on a line pegged by a licensed surveyor. - Part of the line is a new brick boundary wall on the house, so the fence runs up to the wall from the front and continues from it to the rear. - At the rear it needs to tie into the existing fibro side fence. - The front section sits in the front setback, so it needs to comply with the council height limit there. Aluminium slat fencing with gates - Section 1: about 2.9m, running from the Colorbond fence to the house, with a pedestrian gate. - Section 2: about 1.3m, running from the house to the side boundary fence, with a pedestrian gate. Please let me know your price, and your earliest availability to measure up and to install. Thanks in advance.

Need PVC picket fencing installation. Already bought picket fencing with post. Send your offers. Need installation. Each 2.4 mtr wide x 1.2mtr height Approx 24mtr on left side and 8mtr on the right side. 1 small gate. Flexible days.

I’m looking for someone to install approximately 50 metres of wire fencing with metal posts at my property in Lesmurdie. The job is fairly straightforward and shouldn’t be too complicated for someone with fencing experience who knows what they’re doing. Please bring your own tools and let me know if you can supply the materials or if I need to organise them separately. Looking for someone reliable who can do a neat, solid job. Please send me your quote and availability. Thanks!

Colour bond fence install 3 panels total 2 on 1 side 3rd panel on other side of house Take away all waste Materials and concrete will be provided. Must have all tools

Installing fence 29.4 m , straight install . 1.8m high

Install 9 x Bunnings fence extensions on colorbond fence. Will supply fencing extensions and any other requested materials. $300 Labour https://www.bunnings.com.au/matrix-2400-x-600mm-charcoal-coolabah-fence-extension_p0029255

Looking for an experienced pool-fence installer to replace the section shown in the photos with Woodland Grey aluminium tubular pool fencing and a new self-closing gate. Approx. 3.94 m total: • 2290 mm fixed section • 1050 mm gate opening • 600 mm fixed section Gate to stay in approximately the same position. Supply and installation required. Existing pool barrier is regularly inspected and currently compliant. Located in the Kalamunda area. Photos show the existing setup and measurements

Build a criss cross pattern wire trellis on one panel of my colourblind fence, so I can have plants growing and climbing up it. Please quote including wire and other required materials. Thanks!

I will be purchasing a gate from stratco nee someone to install the gate its 108cm wide by 1.8 high attach to a bric wall.and the beick house .its a picket fence aluminum. Will have the wall brackets. The gate shown is like the one being put up bit nit the actual gate as i babe to go picke it up

I need someone to install 39.20 meter fencing, There will be about 3 meter asbestos fence to be removed.

Lattice came undone due to rusty 3 bolts

Looking for a handyman available soon to realign and fix back gate. It is a small colourbond gate that closes. The end of the frame was screwed into a brick wall but one of the bolts snapped off. New hole in brick wall was required that I didn’t put at the right height and made a bit of a mess of so the latch won’t close. I have run out of time and don’t have the right tools for the drop before I head away tomorrow and need the gate to lock. A quick handyman job if you’ve got a drill. Have new plugs and bolts. Extra points if you’ve got some extra time and are available to rescrew my garden shed door so that it also closes. (Can raise price of job if required).

panel 1 needs replacing on fence

one panel was damaged need replace

I need a metal post installed for my pool area so i can put up a shade sail. I just need a post installed, please. Near the fence.

The tenant has advised the gate has fallen off the hinges again as they have rusted through.

I need an experienced aluminium Slat Fence and gate Installer to assist with two jobs. Similar to photo.