Find a fence installation professional in South East Perth

Remove existing pool fence and install glass pool fencing. Details: • Remove and dispose of old pool fence • Installation only – glass already purchased • 10mm toughened glass, as-new condition Measurements: • 1 x gate: 890mm (W) x 1160mm (H) • 3 x panels: 1090mm (W) x 1160mm (H) • 3 x panels: 1600mm (W) • 1 x tall panel: 670mm (W) x 1850mm (H) Looking for an experienced installer familiar with glass pool fencing and compliant with Australian pool safety regulations.

Fence blew down in wind. Would like to replace panel with colourbond

The latch on my gate has fallen off. I have glued it for now. But its not going to last long. I am happy if it can be fixed, but ideally I woud like to install the black lock in the pictures.

Had gate removed for driveway restoration now needs to be put back

Remove cement fibre fence and replace with colorbond panels Approx 15 meters

Wind fence installation, I have already bought the fence but materials will need to be purchased for installing the fence, which I will provide. Second part is spreading mulch on the verge in front of the lot. The lot width is 15m and located in piara waters

Remove current metal sheets from gate frame. Paint frame. Replace panels with colour bond sheets.

Security gate supply and install required on the side of the house, color bond slats or some fancy options quote required

Supply and install 50m Colorbond fence, while remove old fence.

Hi, I’m after a like-for-like replacement of approx 15m of pinelap fence at the front of my property. The posts should be okay but the rails and slats need replacing. Materials not supplied and old fence to be removed.

I am looking for an experienced and reliable fencer to supply and install a Colorbond fence panel to replace a damaged section. Details are as follows The panel is less than 2 metres in length, standard height Standard Colorbond fencing required Colour to match existing fence or closest available match

installing side gate , u just need to make a hole for latch , other than that for the electronic key , it already have a hole just need to sliding in, left side of side gate : - colorbond fence - bottom concrete right side of gate : - back of post is wall - bottom is soil

Remove approx. 8m of old fencing and replace with 9.5m of new colourbond post and rail fencing. I can arrange the fencing or you can supply. 1800h x 3m with a slope down to 900 high for the remaining of the fence. I also want the old fencing taken away from the site. The site is mostly clear except for an old tree stump that I am hoping the post and rail will now clear. photos attached and site visit welcome. any more info required, please reach out.

I need a colour bond fence pole dug out and a new post replaced

Hi Everyone, We need to install the side gate to the house which comes from the fence to house. This will be 2 meters. If you can share us your previous work. It would be helpful

The gap between the fence and the patio is about 5m long and 1m wide, will need to come to house and quote job

3 metres width Colourbond gate needs to be replaced with something less expensive. The gates are damaged. This area is prone to high wind.

Install the Peak, No-Dig fencing at my mums house.

I need a panel beater to repair/replace and then respray the left quarter panel of my 2012 Honda Jazz GE 1.5 VTI. Please see pics and provide quote.

1. Pickup(Solar 4G) camera from Aubin Grove. 2. Procure a 4 meter tall sturdy metal post. 3. Procure quick set concrete mix. 4. Procure required nuts and bolts to attach camera to metal post. 5. At construction site in Willetton near the water meter. Install the metal post with camera. 6. Post must be 1 meter below ground and 3 meters above the ground.