Find a fence installation professional in Chadstone

Fence post needs replacing on the back fence, fallen due to the storm couple of weeks ago. - Due date: Flexible

I need quotes so I can get them done quickly. one side is 15m back is 14 m

Needing fencing installed around the parameter of property. Please refer to diagram and below dot points: -Automated Sliding gate at 3.25m width with 1.2m of height. Can be any brand of sliding motor as long as it's a reputable brand and has warranty. - Steel Fence in black colour (powder coated) with Gothic Ring custom steel design for fence panels (non corrosive welding to be used) and sliding gate (preferred) [see attached photo of the design we are after]. Approximately 25 lineal meters of fencing required. - Heavy duty concrete to be used in the installation. - Warranty for work & materials expected.

I'm unable to complete a fencing job dyue to health reasons and looking for someone to complete a short section (10m) of merbau screening fence and to hang a gate. Fence is only 1000mm high. Posts are in and it is simply a matter of cutting to size 5.7m & 2.7m lengths and affixing merbau screening (69 x 19mm) It should take no longer than 4 hours. All materials are already on site and all posts are already in place. You'll need your own tools. Budget is the max I'm prepared to offer for this simple task. Obviously carpentry skills are a must and it must be completed Weds. Cheers

Hi, I recently posted a request to have a fence/gate installed on Airtasker. My plans had fallen through with someone else.

The wing fence was knocked down due to wind storm. Looking to replace: - standard paling fence 1950 mm high - apx. 3m long

I have a picket fence on the front and on one side of my front lawn (photo 3). Need someone to build the other side of the fence nexts to the driveway, matching height and style with a gate near the front door. No materials provided. Please feel free to provide a quote. Photos below.

Replace 12.2 m of standard paling fence rear property boundary. Height 1.95m approx. Easy Access through gate on one side or an open common driveway on other side. Old fence has been removed. Ready to start now prefer if could be completed by sat 22 June.

I am looking for someone (a builder or a fencer) to construct a front fence without charging a fortune. Existing fence can be removed by me before you arrive. 3 sections in total need to be build which are one 3.2M section between the side fence and the driveway, a 5.8M between the driveway and existing pathway and another 3.2M section between the path and the side fence on the other side (Please refer to photos) The second photo is the fence in after (vertical pickets with horizontal rails on top and bottom) Fence will be 1.65M high

Need someone to Install a Pool type Fence/Gate for one side of the house to be used as a safety gate/fence. Overall dimensions are approximately 2600mm Long x 1800 mm High.

I need a garden gate. Height has to be less than 1 meter 2 meter total area 2 post will be required

Supply and install 1.8 meter Gate to the front garden

Wooden Pine sleeper retaining wall needs to be about 900 mm away from the Front fence running parallel to the front fence. Fence runs 12.2 meters. There is a slight but obvious slope that needs to be accounted for (top to down ,and left to right towards the fence). Depth of the retaining wall needs to be between 40 mm - 60 mm.

Looking for someone to fix a fence ... need 1-2 palings and re connect timber to fence post

Looking to get swing driveway double gates supplied and installed. See pic for dimensions. Gate height needs be atleast 1650mm from the ground. Need it done asap. Preferred shape/design/colour is attached. Professionals only please. The area experiences strong winds and I need a job well done.

8.7 mtr long 1.5 mtr high picket fence required. Flat area. Also require roller gate 3.7 mtr for drive way and pedestrian gate 1.3 mtr approx. area chadstone. Please provide quote. I have put approx amount 1800 which includes material and labour . Flexible with time.