Find a fence installation professional in Auburn South

Need a new timber gate installed between treated pine fence (not in great condition) and house (weatherboard). Around 1960mm wide and 1800mm high. Existing steel paling where old gate used to be. Garden can be cleared as needed. - Due date: Flexible

Remove & Replace an existing fence roughly 8 meters long . - Due date: Before Sunday, 7 January 2024

New picket fence installing roughly 9m & 1m wide gate in the middle. Electric gate on the right (for drive) roughly 3.4m Including materials and painted. - Due date: flexible

Council requires a Buiding Permit before new boundary fences are erected. I need a Building Surveyor apparently to do this. - Due date: Flexible

Need approximately 5L/m of timber paling fence replaced including 3 posts and rails. Old section of fence to be removed including the creeper that has over grown it. Also need fence extensions added to top of fence to meet pool compliance. These will be supplied by me. Approximately 6 rosemary bushes to be removed. All waste to be taken away and disposed of by you. Will need to inspect site to organise materials and quote. - Due date: Before Saturday, 17 June 2023

I’ve got gates that fit across our driveway, but need them installed with posts. Images attached, there’s a few spots the posts could go, I just need the driveway blocked off so the dog stops barking at the front fence :) - Due date: Flexible

Need new Boundary fence up. Hawthorn East 37m length Standard heights Looking to get done in Dec Contractor to supply and have materials delivered to site

Hi - I need a horizontal fence rail replaced between three posts. I will buy the timber - just need someone to help with the work.

Need to replace my existing rear boundary fence with new timber fence Needs to be pool compliant on the inside (double sided) Good access from lane on both sides L shape 15m and 10m 2m high

I’m looking for someone to replace our rotten timber railing panels. You would need to supply all materials and equipment for this task. There appears to be three timber rails that need to be replaced (two vertical and one that runs along the bottom which connects a number of vertical posts). Please let me know if you have any questions or would like any information

Some of my timber fence railing has rotted and needs to be replaced (see photos) looking for an airtasker to remove the rotten fence rails and replace. You would need to supply all materials and tools

I have a fence that has fallen. Around 5 meters long and sits on top of a small brick wall that is 1m tall. Palings need to be around 1.5 and posts around 2.5

remove and replace back timber fence 20M Good access

Supply bottom rail 75x50x5.0m and replace on existing fence and make good.

Our front and Side gates need to have slats replaced. (Preferably aluminium slats) Frame stripped and painted. Front Gate width 2780 height 1800 Side Gate width 900 height 1700

Glass pool gate too heavy and "pulling" post off vertical thereby not self closing. Will provide photo to interested party. Job location Hawthorn

1500mm high flat top pailing dressed cyrpess pine fence nom 6.4M, 11.5M and 11M wide. Owner to stain.