Find trusted local electricians in Sutherland Shire

Bit of an all over the shop task - all information is below . Please feel free to ask questions and leave your best quote or hourly rate - Basketball ring removed - two white pillars have some debris removed ( think it’s from popped balloons that were once tied up around them ) removed - our laundry door has come off of the hinge , possibly broken - bathroom lights & fan covers have fallen off and need to be put back on or replaced - patch of wall sanded back Touch up of paint on the sanded jobs

I need 2 power points put in the wall and 2 85inch tvs hung on the wall. I have brackets. I also need an electric fireplace hung on the wall And 2 Sonos speakers wall mounted.

Hi, I’m looking for a licensed electrician to complete three specific tasks at my house. Photos of all areas and components are attached for reference. 1. Heated Towel Rail Connection Task: Connect an already-mounted heated towel rail. Details: The previous owners snipped the internal 3-core wire short inside the square wall bracket (recessed about 1cm). You will need to strip the outer sheath inside this open bracket, splice/extend the 3-core cable (using inline crimps/heat-shrink for a tight space), drill a clean hole through the drywall cavity into the laundry directly behind it, and terminate it with a standard 3-pin plug to connect to an existing laundry wall socket. 2. Bathroom Fan & Switch Replacement Task: Replace an existing 2-gang switch and hardwired ceiling exhaust fan. Details: I have already purchased and have onsite the following parts: Switch: 2-gang smart switch (SAA certified). Fan: Fantech Trade Rapid Response 200 ducted fan (matches existing duct size). Note: The replacement fan comes with a 3-pin plug, so you will need to install a surface socket (plug base) connected to the existing hardwiring and install the new fan in ceiling. The ceiling cutout will also need to be slightly enlarged to fit the new unit. 3. Switchboard / Meter Consolidation Assessment Task: Inspect the meter box against NSW Service and Installation Rules (SIRs). Context: I currently have two digital meters and want to consolidate to a single smart meter. My retailer is claiming “there is insufficient space for a Mk10D meter (which requires 175mm clearance)” from a 2019 assessment with prior owner but physically there appears to be plenty of room. Requirement: I need a professional assessment to confirm if the current board is compliant for the upgrade. If it is not compliant, please provide a quote for the minimum required board modifications so I can get the retailer back out to install it.

Small balcony in a unit block. Need someone professional as will need to get strata approval. Preferably to get done around 25th of June.

Need to install a roller shutter and hard wire in

I want to install 3 Aqara smart light switches I have them already

The power point was pull off the wall and needs to be fixed back on. No paint job required. Just put the power point back on the wall.

Need van electrician mechanic to fix wiring to head lights on ILoad Hyundai 2018 model. Looking for reasonable price not rip off. Doesn’t have to be Hyundai parts! Has to purchase parts for me and charge for services. Make an offer. I know what other places cost.

Looking for a qualified electrician for general residential electrical work in a home. Jobs include installing light fittings, minor rewiring, repairs and other general electrical fixes. Must be experienced, and able to complete work safely and professionally.

Secure the cables of the hanging pendant light

Disconnect old hardwired oven. Make connection safe and install standard 10a socket so that I can install new oven.

Replace single powerpoint with double in garage, existing powerpoint already installed. Need Certificate of Compliance upon completion.

We need 1 X more double electrical outlet in our dinning room as our NBN plug won't reach the current one. If you can supply a white electrical outlet and install Approx 2000-2400mm from the other one & same wall

I’m looking for someone to install a small solar power system on my 15ft Franklin caravan. What I need done: 1. Mount my solar panel to the roof of my caravan 2. Run the cabling into the cabin neatly and weatherproof the roof entry point 3. Connect the solar panel to my Kings power pack (portable battery) 4. Install a 12V connection/output so the Kings power pack can power: • Existing 12V caravan lights • A small 12V fridge Details: • 15ft Franklin Caravan with internal 12v lights and 3 way fridge • Solar panel and Kings power pack already purchased • Happy to discuss any additional parts required (cables, connectors, fuse, regulator etc.) • Can negotiate price

AusGrid just replaced a power box that we draw electricity from. They said that before we use our aircon we need an electrician to come and “phase rotation is to be confirmed before energising”. We have a pretty new fuse box- we had it replaced with a new one about a year ago when we moved in here, so I imagine it should be straightforward enough. The AC unit says “daikin code ertor u1”, so we need that fixed.

I required electrician services for power point there junction box on the ceiling and needs around 1 meter wiring and install new power point. I can provide the power point. Expect electrician shroud have 1 meter 3 core wire and covering if any.

Hello, We require an URGENT call-out from a licensed NSW Electrician to replace a faulty light in our staff/storage room at retail store in Westfield Miranda. The Issue: The ceiling-mounted batten light in our staff room has completely failed. The Job: The task is to restore lighting to the room. The scope of work includes: 1. Attending the site to diagnose the fault (e.g., blown tube, faulty starter, failed ballast, or a faulty integrated LED unit). 2. Supplying and installing the necessary replacement part. This may be a new tube/starter, or a complete new like-for-like batten fitting if the current one is irreparable. 3. Testing the light to confirm it is fully operational. Requirements: MUST be a fully licensed and insured NSW Electrician. You must have your own tools and a suitable ladder. You must be able to supply the replacement tube or a complete new standard batten fitting as part of the job. Location & Timing: Location: Westfield Miranda, 600 KINGSWAY, Miranda, 2228 When: URGENT - This is a priority for customer and staff safety. We require service as soon as possible. Please state your immediate availability in your offer. Please provide a comprehensive quote for the complete job. Your offer should include your call-out fee, all labour, and the cost of supplying either a new tube or a complete new batten fitting. Thank you.

We got a new light fixture and require someone to remove the old one and install the new one

1. Need kitchen GPO replaced due to water damage from old roof leak, leak now fixed but GPO was corroded and needed to be removed, wires look ok so should be an easy fix 2. Potential for a second job

Our ducted air con system has a weak fan and is hardly cooling at all. Would like someone to take a look and do a fault diagnosis and general service.