Find local downlights installers near you

I’m looking for an electrician to replace 4 down lights in my apartment. The lights were replaced before but it’s still dim and other downlight is not working. I think it would need an LED driver as well. My budget is $150 including labour and materials.

Sea Airtasker I need a qualified experienced electrician to replace 62 down lights with brighter, energy efficient LED lights. Also to fix a power point that is not working and replace the bulb in a wall light.

Need 4 lights changed to down lights

Replacing or upgrading to down lights (20 (

Change downlighting in living room Some lights don’t work at all, not just replacement of bulb.

Supply and install two led downlights

Task 1 - Install a new light in the garage ceiling, probably to replace existing. Preferably a 3 or 4 globe downlight on a single track. These new lights to be on a dimmer. See first 2 photos. Price to include the new light fitting. Task 2. Existing 4 recessed dimmable downlights in living room have stopped working. Power is fine, globes are fine, think it's the dimmer switch. See last 3 photos.

Electrician Required – Bull Creek (24th or 25th June) Looking for an electrician to complete pre-wire and final installation for approximately 20 downlights in a residential renovation in Bull Creek. DOWNLIGHTS ARE PROVIDED. Install plug bases/sockets for downlights before the new ceiling framing and gyprock are installed. Supply and install any required switches, cabling and accessories. Property details: Existing ceiling is being replaced with a new gyprock raked ceiling. Preference for work to be completed on 24th or 25th June. Quote per Downlight please.

Three kitchen downlights tied to the same switch are pulsing. They will need to be replaced with new ones and changed to individual transformer (as opposed to connected)… if that makes sense.

Downlights to be purchased and installed at Wyndham vale property

Hi, I'm looking for a licensed and insured electrician to complete a small fit-out in my apartment in Liverpool 2170. Work required: • Install 1 or 2 new double power points (GPOs) – exact number and wall locations to be confirmed on site • Install 2 x pendant lights (light fittings supplied by me). You will need to bring the switches • Install 1 x downlight (fitting supplied by me) What I need included in your quote: - Work carried out to AS/NZS 3000 standards - Testing and a Certificate of Compliance (CoC) on completion I have attached photos of the of the ceiling and the wall where the installation will happen

Dinning room, kitchen, main bedroom light fittings installed. External back & front lights repaired, new down lights installed in hallway

Replace 3 lights. Will need to buy 3 down lights. The 3 fancy light are the ones I want to get rid of for something similar in the other photos.

Replace 4 downlights you will need a ladder. Parking is hard so im happy to pay for a parking station

Hello, We are looking for a licensed NSW Electrician to attend our retail store, in Westfield Castle Towers, to inspect and secure a loose downlight. The Issue: One of the recessed ceiling downlights located directly above our main customer display table has come loose and is sagging out of its ceiling cutout. While the light still functions, it is partially detached. The Job: The task is to safely access and re-secure the downlight so it is flush with the ceiling. The scope of work includes: 1. Safely accessing the ceiling above our central display island (an appropriate ladder/steps will be required). 2. Inspecting the downlight and the surrounding plasterboard. 3. Re-securing the fitting into the ceiling (adjusting or replacing the spring clips, or reinforcing the plasterboard edge if it has deteriorated). 4. Testing the light to confirm it is secure, flush, and working correctly. Requirements: - MUST be a fully licensed and insured NSW Electrician. - You must have your own tools and a suitable ladder to work safely above our display table. - Ability to work cleanly and professionally in a retail environment. Location & Timing: Location: Level 2, 6-14 Castle St, Castle Hill NSW 2154 When: URGENT - As this is located above a high-traffic customer area, we need this resolved as soon as possible. Please state your earliest availability in your offer. Please provide a quote for the complete job. Thank you.

Move PowerPoint and tv point Replace 8 downlights

I require a licensed electrician to complete the following electrical work: 1. Install Bathroom Heat/Fan/Light Unit: Supply not required – I will provide the unit. Install and connect the IXL Tastic Original 3-in-1 Bathroom Heat, Fan & Light. Replace the existing Clipsal wall switch with the appropriate wall switch that came with the unit. Existing bathroom downlights and exhaust fan functionality must be retained and continue to operate correctly after installation. No bathroom wall tiles are to be damaged, removed or broken during installation. Photos of the existing setup is attached. 2. Supply and Install Two External Downlights: Supply and install 2 new LED downlights outside the house near the left-side gate. There is an existing downlight in the area which can be used as a reference point for installation. Electrician to supply all fittings and materials required. 3. Replace Toilet Light Bulbs with Downlights: Supply and install 2 LED downlights (one in each toilet) to replace the existing light bulb fittings. Existing Clipsal wall switches are to remain in use and continue functioning normally. Electrician to supply all fittings and materials required. 4. Wiring and Electrical Work: Electrician to supply and install all wiring, connectors, cabling, mounting hardware and any other materials required to complete the works. 5. Electrical Certificate: Provide the required Electrical Safety Certificate / Certificate of Electrical Compliance upon completion of the works.

Please only licensed electricians bid on this job. Please include materials in your bid. Job description: Replace 1 halogen light with a standard LED down light. I have included a photo of the general down light we are after. An iron caused a fuse to blow and the light has blown. The other switch on the same switch still works. There is no rush for this job although we are aiming to have it completed this week, 8th-14th June. Please send any questions you have. Thank you.

Licensed electrician required to install 2 x Philips Hue Akari downlights in my Melbourne CBD apartment. Scope of works: * Remove 2 existing downlights * Enlarge existing ceiling cut-outs from approximately 63mm to 90mm * Convert existing hard-wired connections to plug-base connections suitable for the new lights * Install 2 x Philips Hue Akari downlights (lights supplied by me) * Test operation and ensure installation complies with Victorian electrical requirements Details: * Apartment with plasterboard ceiling * Existing lights are currently wired directly into the electrical circuit (not plug-based) * New lights require 90mm cut-outs and plug-base connections * Looking for a neat, professional finish with clean cut-outs and no ceiling damage * Licensed electrician only * Please include any parts required (e.g. plug bases) in your quote and advise whether a Certificate of Electrical Safety will be provided

Task: Convert 12 Existing Downlight Cutouts from 70mm to 90mm and Install New Plug-In LED Downlights Looking for an experienced handyman with downlight installation experience. Scope of work: • Enlarge 12 existing ceiling downlight cutouts from approximately 70mm to 90mm. • Install supplied 90mm LED plug-in downlights. • Connect lights to existing plug bases. • Ensure all lights are fitted neatly and sit flush with the ceiling. • Clean up any plaster dust/debris afterwards. Materials: • I will supply the new 90mm LED downlights. I’ve got new ones here. • Please bring appropriate tools, including a 90mm hole saw or suitable cutting tools, a ladder, and cleaning equipment. Property: • Apartment in Sandringham, Melbourne. • Existing downlights are already installed and working. • Access is straightforward from inside the apartment. When applying, please include: • Relevant experience with downlight installations. • Confirmation you have the required tools. • Your estimated time should only take between 30-60 seconds each hole Photos of the existing lights and new lights can be provided.