Find local downlights installers in Craigieburn

We need a qualified electrician to increase the cutout size from 70mm to 90mm and install the down ceiling lights. The current setup is 70 mm cutout and the lights donot have the plugbases attached. Lights and plugbases will be provided to you. Total number of lights - 35 This is the quotation, just for the labour charge and would also require COES certificate

I need 5 down lights replaced as they have stoped (expired) working. Need quote on work including the lights. Certificate required. Please see pictures of exiting lights.

I need to install 6 downlights in my garage.

Ceiling downlight to change from CFL light to LED downlight colourful( chrome casing) with min 900lumens per light. Total lights in house - Approx 26x lights House is double story independent house Please quote lumpsum amount for job

Looking for quote to replace 7 downlights. These are not plug and play ones but the old style wired connections. I am unsure if they are 70mm or 90mm cutouts. Need someone to get the right size lights as well that can either be included in the quote or I can pay separately.

Need to wire all 3 down lights to the 1 circuit

Need to install new 4 down lights in 4 rooms.

2 down light over the garage door, 2 on the front porch and one on the side of the house (over meterbox). One outdoor light on third rendered pillar. One PowerPoint in the powder room and one ceiling fan in kids room

Need two downlights to be supplied and installed in the single storey house . Holes needs to be done. Both need to be wired with an existing downlight. So no new switch required. D

Replacing old light with downlights

Seeking a licensed electrician to provide the following: -Installation of 8 additional powerpoints in various locations around the house. Powerpoints will need to be provided. -Repair one powerpoint in living area that is operating well but a bit loose at the wall, so that it no longer pulls away from the wall when removing plugs. -I recently had my patio roof lining repaired following collapse. Prior to the repair job my insurance company disconnected electricity to the area to make it safe. I will need the outdoor floodlight reconnected to the indoor light switch. I will also need 5 holes put into patio roof lining for downlights and to have these also reconnected to the indoor light switch. Plugs / wiring for the lights are already positioned inside the roof lining for the 5 lights. 5 downlights will be supplied by me. -Provision of certificate of electrical safety for works conducted. I have attached a picture of the patio prior to the collapse so you can get an idea of how I need the lights positioned and where the floodlight is located. Pic of switchboard also included My house is a single story home and roof access is easy via manhole in laundry. Easy parking in my driveway. Any questions so you can provide an accurate quote, please let me know :)

I have one light in centre of gurage done by builder operated on 1 switch. I would like 4 down lights to be operated on a separate switch, need the certificate. Craigieburn.

I need 12 dowlights installed, 12 upstairs and 2 on groundfloor, and 2 sensor ights (1 in front and 1 in backyard)

Need ceiling light quation allover home

I need additional two downlights to be installed in craigieburn.

I need to change stairway downlight from old style to 90mm style. It is double storage house. The light is on deep-end and will require longer ladder. In rest of the house, it is 90mm downlight. Only one spot has this light. The previous electrician had remove back plug to avoid it being turned on. So need to add that back again. Job requirement: - Remove old led light - Make the hole wider - Replace with 90mm light (I got spare light) - Fix up any wall damage caused by ladder - Put the back plug on light from roof so it can turn back on. - Provide Compliance certificate - Provide Invoice In the photo you can see it is about 4.5 metres high. I don't know if it can be done through the roof but I'll leave it with you.

I will purchase the downlights. Electrical wiring will need to be done through 2 way switches.

down lights which are not working to be replaced with new down lights and there is a short circuit happening in the shower rooms when one of the switches is ON. that needs to be fixed

Have 22 downlights that need to be installed Hole is 7 inch but needs to be cut to 9 inch and downlights to be replaced with single downlights not same ones I have all downlights purchased

3 down lights are not working, probably needs replacement