Find trusted local electricians in Bayswater VIC

1. two kitchen downlights – no power / not working 2. One dining room downlight – functional but edge cracked, replacement needed 3. One front porch light – not working

Broken switch in hallway. Needs to be replaced. Also need extra power point in my bed room .preferably remove the fan regulator and replace with power point. That may help. Fan was removed few years back.

Scope: * Ensuite: install 2 x heated towel rails, 1 x bathroom heater/fan/exhaust/LED light (over existing ducted exhaust fan), and 1 x LED mirror. * Main bathroom: install 2 x LED mirrors. * Main living area: hardwire 4 x remote-controlled electric roller blinds. No wall switches required. Please provide total price for all 4. * Alfresco: install 1 x Jumbuck 2200W outdoor strip heater above bifold window. Please advise if dedicated circuit, isolator, weatherproof outlet or extra wiring is required. * Powerpoints/GPOs: install 11 x double GPOs. Final positions to be confirmed onsite. PP1-2: main kitchen splashback PP3: butler’s pantry splashback PP4: inside island bench cabinet PP5: family room wall PP6: family room TV mounting height and mount 75 inch tv on wall and wire pass through to connect to other equipment PP7: master bedroom TV mounting height PP8: main hallway wall PP9: retreat TV mounting height PP10-11: wall near hallway to family room * Lighting/existing points: LL1: energise existing outdoor light in carport LL2: energise existing light and double GPO in garage LL3: improve main entrance lighting, provisional item subject to onsite review I will supply the bathroom products and alfresco heater. Please include in your offer: * confirmation you are licensed and insured * labour cost and whether materials are included/excluded * pricing for all GPOs * total cost for hardwiring the 4 roller blinds * cost to install alfresco heater * allowance for LL1, LL2 and provisional LL3 * any extra costs for switches, plates, wiring, wall chasing, roof/ceiling access, switchboard/circuit upgrades, weatherproof outlets/isolators or patching * confirmation that a Certificate of Electrical Safety will be provided where required Photos/marked-up locations can be provided. Final locations to be confirmed onsite before work starts. Please reach out if you have any questions. budget is flexible.

Insatll powerpoint and Circuit breaker

I'm renovating my shower myself and hence, looking for a LICENCED plumber and electrician to help me do the plumbing and electrical jobs that require mandatory COC. At the most it's a half day job, since I'm keeping the old plumbing as it is - just swapping the vanity and shower positions.

Hi, could you please provide me with a quote to install the following? I will require an electrical compliance certificate once the job is done. 1 x Double GPO and antenna point relocation in the main living area 1 x Double GPO and antenna point relocation in the main bedroom 1 x Double GPO and antenna point relocation in the retreat 1 x Double GPO in the formal lounge 4x hardwire and install LED mirrors (1x in the ensuite, 1x in the powder and 2x in the main bathroom) 2 x heated towel rails in the ensuite. Please provide me with your quote and availability. Please feel free to reach out if you have any questions

Hi, I’m looking for a licensed electrician to do the following work at my house: 1. Ceiling fan installation • Install one ceiling fan (fan supplied). 2. Smart doorbell installation • Install one smart doorbell at the front door. • Power connection required (device supplied). • Wi-Fi already available. Please include: • Electrical licence details • Confirmation of availability (preferably weekend) • All tools and fittings required Thanks.

I've got a Domain split system Ac which wont turn on. Its got a red light on the indoor unit but pressing start on the remote doesn't start the AC. Not sure if regular service is required or something else is wrong

Ceiling fan cleaned, electrical cover at top refitted. Very high cathedral ceiling will need long ladder.

Hey there I have created myself a wiring issue I believe , I was running some foglights and needed a constant power supply from inside the car for the switch I tapped into what I now know is the hazard wiring orange/red wire in the dash loom I currently have no hazards,indercaters no low beams but have Parker’s and high beams Indercaters will flash with lock and unlock All the wiring I had added is now not connected to try and find this issue and resolve it I have swapped hazard switch’s flasher can indercater stalk swapped low beams relay ignition switch Any help would be greatly appreciated Cheers

Need to get some lights fixed at front door, backward and Kitchen

Additional Plugs. Carport : add 2 plugs on wall and 1 plug under the ceilings. Bathroom : relocate an existing plug above vanity.

The Antitheft System is flashing causing the battery to drain

Remove ceiling fan, install 2 downlight plug connections. I’ll supply downlights.

Upgrade 2 older style downlights to the plug in variety. You need to supply the plugs not the downlights.

Hi I want to relocate the NBN box ( currently in a bedroom) to a family area in the house. Single storey. Tiled. Current NBN connection from road to house is on the other side. The cables are coming underneath to the current location. (House is on stumps).

Need to replace pressure relief valve on Aquamax water heater

The issue at home is that the downlighting in the kitchen and one of the rooms randomly go dim or at times completely off. There are four lights in the kitchen and only two light up with varying degrees of brightness from time to time. Room has two down lights and they have gone very very dim. There are no dimmer switches. Just ON/OFF. All lights are on the top floor. None on the ground floor. https://www.youtube.com/shorts/hjvSU1s_nX4 https://www.youtube.com/shorts/8YlhjsUlU5U Are you able to have a look? Could you also include your fee structure. Thanks.

Replace 8 existing Down lights (still have power) then no need to do anything new with this light weight ceiling Bulbs ( no cover ).

I have a switchboard already beautifully designed by my previous retired sparky. I would like to transplant it to my new factory in Bayswater which has an old switchboard with no safety switches. I need to connect to 2 x 3 phase machines. I have some 3 phase cable attached to the machines - about 10 metres each.