Find trusted local electricians in West Melbourne

Repair replace electrical cord

Our apartment has a balcony and the electrical power point has stopped working. We also need to re-affix a lose one and install a USB compatible power point in the kitchen.

Hi, I need an electrician or qualified handyman to replace an old rangehood and fix an oven door that is not closing properly. 1. Replace the old rangehood • Remove existing non-functional rangehood • Supply and install a budget-friendly but reliable quality rangehood • Ensure wiring is safe and functional • Dispose of old unit (optional) 2. Fix oven door not closing • Inspect current freestanding oven • Repair or adjust hinges/seals so the door closes properly • If small parts (hinge, screw, clip, seal) are needed, please supply replacements and include in quote NOTES: - Property is vacant - Access via property manager - Please include materials in quote - Itemised quote preferred

Underneath the eaves on one of the side sides of our house, is a whole bunch of wires and old Telstra boxes. I don’t thinany of these are hooked up to any electricity any more. I need someone to come in and clean them up so that the cords aren’t sticking out because we have a builder coming out to put eaves up.

30 downlights to be installed. Singke storeyed house in Manor Lakes

Pillar light installation

Would like someone to help hang christmas lights on our front facade, unfortunately our ladder isn't high enough. Wanting them hanging from the white metal part as highlighted in the picture. It is just one set of lights. Clips prepared and provided to stick on. If possible to get to the top of the roof, I'd consider doing the same to line the triangle shape of the roof. Would light your recommendation if the clips should go just under the metal bit as theyre not weather proof. If the lights are long enough happy for them to wrap around the side of the white bit and hoping the solar panel is long enough to go into the ground near the porch so we can leave lights up all year round and turn on only im December. Happy to get this done later today or tomorrow. Just looking for someone handy and experienced with Heights, not so much a professional that will charge alot.

Need to install 2 air conditioner. 1in first floor which is going on wall. Next one is on ground floor going on concrete. Looking for best quote.

Looking for a licensed electrician to replace two downlights. One if the kitchen and one outside the front door. They are hard wired

Move switch in New location approximately half a metre and move light to centre of the room and look at ensuite power on the same circuit as slight switch

Need an electrician to install a new double power point on the wall. The wall sits behind one that has a power point

Electrician Required – Safety Certificate for Non-Operational Café We are seeking a licensed electrician to inspect a café premises that is currently not in operation and provide the necessary electrical safety certificate to restore the electricity connection. Location: Laverton North, VIC Availability: As soon as possible If you can assist, please get in touch with your availability and a quotation

Replace two old ceiling lights. First is kitchen replaced with new round fluorescent. Second is dining room, replace with 3-way LED spot light. New lights supplied.

Need to change HFC NBN port location. Currently it's in the living room and i'd like to change it to my bedroom. Theres an old ADSL port thats currently in the bedroom which might help with drilling.

Out outdoor wall lights don't work. Lights are less than 2 years old. Suspect its the power switch that's faulty. Need a licenced electrician to check/fix the issue.

Hi there, I’m looking for a qualified electrician to help fit two hanging pendant lights. The power points are already in place; the task involves safely removing any existing fittings and installing the new pendants. Details: 2 pendant lights to be installed 2.7m ceiling height Power and switch wiring are already available Must bring your own tools and ladder Requirements: Licensed electrician only Experience with pendant light installations Ensure all work meets Australian electrical standards Attached are the installation points and pendant lights instructions for one of them.

We require a licensed electrician to install and connect 3-phase power in our factory for: 1. Light Gauge Steel Roll-Forming Machine (main equipment) 2. Battery-powered Forklift Charger (Lithium) – requires a 3-phase outlet connection from the same supply ⸻ Scope of Works • Run approx. 30 m of 16 mm 4C+E circular orange cable (see photos). • Install 40 mm rigid PVC conduit with 90° bends neatly along wall and ceiling (route shown in red in photo). • Connect to existing main distribution board inside the office area (see photo). • Install and wire: • 1 × 40 A 5-pin 3-phase outlet (IP66) for the roll-forming machine • 1 × 32 A 5-pin 3-phase outlet (IP66) for the forklift charger • Supply and fit appropriate RCBO / MCB protection as per parts list. • Test, label, and commission both outlets for safe operation. • Provide certificate of electrical safety on completion. ⸻ Materials Supplied On-Site • 30 m – 16 mm 4C+E circular unarmoured orange cable • 10 × 40 mm rigid PVC conduits (4 m lengths) • 90° conduit bends • 3-phase outlets and plugs (40 A & 32 A IP66) • Distribution board enclosure and circuit protection devices (see parts list) ⸻ Requirements • Fully licensed A-Grade electrician with industrial experience • Own tools, consumables, and ladders if required • Must provide Certificate of Electrical Safety upon completion. (I will organise scissor lift) ⸻ Photos Attached 1. Factory wall and conduit path (marked in red/blue) 2. Main distribution board location (office) 3. Orange 3-phase cable roll 4. Supplied conduits 5. Parts list with all supplied materials ⸻ Preferred Start: ASAP (factory is ready for works)

2 x Pendant Lights to be wired and installed on top of Butchers Bench in Kitchen area

Needing solar panel bird mesh installation. Approx 30-40m perimeter . Double storey house

6 new electrical plug sockets to be installed in my house.