Find trusted local electricians in Ryde

ASP Level 2 Electrician required to upgrade fuses in the switchboard. Bluecurrent came by to install a smart meter but said that the fuses needed to be upgraded before the house can be isolated safely. Flexible on timing. Switchboard appears to be three phase. Location in North Epping.

This brand new smoke alarm has been just installed - we have another 2 smoke alarms in the house - 3 connected together - this one in picture as soon as you close its lid or put battery starts giving out the alarm - need fixing

Remove existing cooktop in kitchen and replace with new from box. Only install and connect, no additional wiring needed.

Two downlights need to be replaced

REPLACE WALL POWER SWITCH

Need an electrician to install 2 new ceiling fans to replace existing oyster lights and check on 2 exhaust fans.

I have a Daikin split system (Model: FTX525LVMA) that has stopped working and is displaying a flashing light on the indoor unit. Please provide a quote for the initial inspection and diagnostic. Details: • Error Code: The remote control is showing fault code F3. • System State: The unit is unresponsive to the remote, and the "Cancel" button on the remote is not functioning while in this error state. • Troubleshooting Done: I have already attempted a hard reset by turning off the circuit breaker for 10 minutes and resetting the remote batteries, but the F3 code returns immediately. Requirements: Looking for a qualified HVAC technician to diagnose and repair. This code typically indicates a discharge pipe temperature issue or potential refrigerant shortage. Please provide a quote for the initial inspection and diagnostic.

Electrician Wanted – Ongoing Fire Alarm Work - Dry Fire We’re after a reliable electrician sub-contractor with fire alarm installation experience for ongoing projects. 📍 Sydney Metro (Macquarie Park office) 🔧 Ongoing work 🚨 Fire systems experience essential ✅ Immediate start for right candidate

Need install of attached fan by licensed electrician. Probably will be hookup to existing power for oyster. Delete oyster light. Install fan. Asap please.

Require a licenced electrician to perform the following: 1. Remove 3 wired smoke alarms 2. Remove an old bathroom light with heated globes and fan 3. Install a new bathroom light with heated globes and fan

We need our outdoor light fittings replaced on the facade of our house. I have all the new fittings purchased and ready. It’s a simple replacement job. Will take 30mins at most.

Need an electrician to install one power point in our family room on the wall.

Looking for someone to replace outdoor bulbs with led lights like the ones in picture. I have the lights, there are 4 of them. Currently some are light bulbs and we want them changed to the ones in the picture

New spa getting delivered Need spa PowerPoint extended from already 15amp outside PowerPoint as new spa comes with only 2.5 meter power cable Need extra 4meter extended

I need a licensed electrician to install a double power point in my apartment. The purpose is to have: • One outlet dedicated to the fridge, and • One outlet for a modem / router Currently there is only a single power point in this location, and I would like it upgraded to a double power point for safety and proper usage. The job involves replacing the existing socket and ensuring the installation is compliant with Australian electrical standards. Please quote including labour and materials. Note apartment is an old one built in 1970s.

Need a certified technician to install an RJ11/NBN wall socket for internet access. The apartment only has an old 600-series telephone terminal. There is no modern RJ11 or NBN-ready socket installed.

We need 2 ceiling fans installed. 1 x in small home office 1 x front lounge room. New ceiling fans provided. Must be a qualified electrician. Install ASAP. Thanks.

Disconnect old oven and connect a new oven. Need LICENCED ELECTRICIAN. Located in Eastwood NSW 2122. I am pretty flexible with the timing. No need disposal. Thanks

Needing an electrician to fix or replace bedroom lights they are hardwired bulbs still work however they work intermittently and flicker and then shut off it could be the driver unsure needing someone experienced

Hello, We are looking for a licensed NSW Electrician to diagnose and repair a faulty illuminated sign at our retail store, in Macquarie Centre. The Issue: Our vertical, illuminated "EYETESTS" sign, which is mounted on a pivoting door, has an electrical fault. The light only turns on when the door is open and goes out when the door is closed. This strongly indicates a broken, loose, or frayed wire in the cable that runs from the wall into the moving door, likely at the hinge or pivot point. The Job: The task is to find and repair the wiring fault to ensure the sign remains consistently lit, regardless of the door's position. The scope of work includes: 1. Safely isolating power to the circuit. 2. Diagnosing the exact location of the break or loose connection in the wiring. 3. Performing a durable repair. This may involve splicing the wire, re-terminating connections, or replacing a small section of the cable to ensure it can withstand the repeated motion of the door. 4. Testing the sign thoroughly by opening and closing the door multiple times to confirm the light stays on reliably. Requirements: - MUST be a fully licensed and insured NSW Electrician. This is essential for safety and compliance. - You must have your own diagnostic tools (e.g., multimeter) and electrical repair equipment. - Experience with fault-finding in commercial settings or on moving fixtures is highly desirable. Location & Timing: Location: Macquarie Centre, Cnr Herring Rd &, Waterloo Rd, North Ryde NSW 2113 (exact location will be provided once the task is assigned). When: The job can be completed at your earliest convenience. Please state your availability in your offer. Please provide a comprehensive quote for the complete job. Your offer should include your call-out fee and all labour required to diagnose and repair the fault. Thank you.