Find trusted local electricians in VIC

Air Conditioning Removal * Remove the existing air conditioning unit. 2 units * Remove the electrical isolator. * Make safe all electrical connections. Reinstall all the removed air conditioner units and isolator after wall finished. * Dispose of removed materials and leave the area clean.

I need a aircon installed on my roof maybe 3 meters from inside unit

I have two electrical jobs that I would like quoted separately. **Job 1 – Add downlights on the second floor** I have two rooms, each with a single downlight installed, and I would like to add two additional downlights to each room. * **Room 1:** The ceiling holes have already been cut and the downlights are already in place. The plugs just need to be installed and connected. * **Room 2:** The ceiling holes need to be cut, the downlights installed, and the plugs connected. This is a townhouse, and the work is on the second floor with full access to the ceiling space. **Job 2 – Add downlights and dimmer on the first floor** * Install 4 additional downlights on the first floor. * There is no ceiling access from above; however, the new lights are only about 1 metre from the existing downlights. * Replace one existing light switch with a dimmer switch. Could you please provide: 1. A quote for **Job 1 only**. 2. A quote for **both Job 1 and Job 2 together**. Please also specify whether your quote includes the supply of the downlights and dimmer switch, or if it is for labour only.

Electrical work - install LED strip lighting, move light, new PowerPoints - Supply and install LED strip lighting in study under shelving (260 mm) - Supply and install LED strip lighting under stairs (205 mm) - Create a separate electrical circuit for one powerpoint - Move light fitting - Create a new powerpoint

Hi, I need to install the new bathroom heater with fan and wall switch.

Looking for an experienced handyman who can also carry out minor electrical work (licensed where required) to complete a range of jobs in a house: Bathroom: • Replace shower curtain rail and install new shower curtain • Replace ceiling light/fan unit (Mercator BH152ESW or equivalent) • Remove redundant exhaust fan if no longer required • Repaint bathroom ceiling to cover staining and possible mould Bedrooms: • Remove redundant smoke alarm mounting brackets and patch ceiling • Touch up wall scuffs and paint marks • Repair and touch up plaster where artwork has been removed Kitchen: • Remove old screws, hooks and tags, and patch holes • Replace two towel rails • Replace one cracked electrical power point Rear Dining Room: • Adjust/fix sliding laundry door so it no longer drags on the floor Please quote for labour and advise whether you can supply materials or if I should purchase them separately. Photos available on request.

Hi all, I am looking for a certified electrician to supply and install a round exhaust fan with a built-in LED light to replace an existing, functional globe light in my bathroom. Job Details: Scope: Remove existing surface-mounted globe light and install a round fan/LED light combo (requires cutting into the ceiling ceiling and wiring). Fixture Color: Must be white. Access: Standard residential ceiling height. Existing light is fully functional. Please include in your quote: 1 Your total price for supply and installation. 2 The specific brand and model of the unit you plan to install. Thanks 🙏

1) I need you to supply and install hardwired smoke alarm (2 units - replacing current ones as they already more than 10 years) and supply certificate 2) replace outdoor wall lighting (lighting will be supplied) 3) change the direction of ceiling light fitting (2 units) so the bulb can point to other direction

I have a power point where the grounding prong seems to be blocked as I cant plug any 3 prong plug in. Need the powerpoint fixed or replaced with the exact same Clipsal Iconic

Task: Convert 12 Existing Downlight Cutouts from 70mm to 90mm and Install New Plug-In LED Downlights Looking for an experienced handyman with downlight installation experience. Scope of work: • Enlarge 12 existing ceiling downlight cutouts from approximately 70mm to 90mm. • Install supplied 90mm LED plug-in downlights. • Connect lights to existing plug bases. • Ensure all lights are fitted neatly and sit flush with the ceiling. • Clean up any plaster dust/debris afterwards. Materials: • I will supply the new 90mm LED downlights. I’ve got new ones here. • Please bring appropriate tools, including a 90mm hole saw or suitable cutting tools, a ladder, and cleaning equipment. Property: • Apartment in Sandringham, Melbourne. • Existing downlights are already installed and working. • Access is straightforward from inside the apartment. When applying, please include: • Relevant experience with downlight installations. • Confirmation you have the required tools. • Your estimated time should only take between 30-60 seconds each hole Photos of the existing lights and new lights can be provided.

I just need a power point moved by a qualified contractor from its current location so we can install a set of wardrobes

A power socket has popped out of place and needs to be fixed. Should be a simple job for someone who has the skills

Rebooking task between Tony and Tom

Looking for a licensed plumber/hot water technician experienced with heat pump hot water systems to diagnose a fault on my Chromagen/Midea heat pump hot water unit. Issue: * Installed in 2020 * Display showing E1 error * Unit has power and display is working * No fan or compressor noise * Hot water is only lukewarm * Power reset has not resolved the issue What I need: * Diagnosis of the fault * Quote for repairs or parts required

I would need an Electrician to replace 2 downlights for apartment in dockland collings st, flexible. Need to provide new lighting.

I’m putting a new TV on a wall - there was previously an outlet on the wall that was removed. I need the outlet put back - wires are still there. There is already a cavity in the wall so I’m hoping it will be easy for you! I’m flexible with where the outlet will go. Need it on Tuesday June 2nd or Wednesday June 3rd (anytime after 9:30am)

Looking for a licensed electrician to supply and install a 4-point power outlet (4 GPO) in place of an existing single power point. Important: The existing power point is installed within a skirting board that is 100mm (10cm) high, so the replacement power point must be 100mm high or less to ensure it fits neatly within the skirting board and does not protrude above it. Scope of works: * Supply a white 4-GPO power point. * Remove existing single power point. * Install new 4-GPO power point. * Test all outlets and ensure everything is working correctly. * Dispose of old fitting if required. Notes: * No wall repairs, patching, plastering or painting will be required. * Photos of the existing outlet and the style of outlet I’m looking for are attached. * Looking for a neat, straightforward installation with minimal fuss. I’ve listed this job at $120, so please keep quotes realistic and close to budget where possible. If there are any genuine reasons the cost would be significantly higher, please explain what additional work would be required. Location: Kooyong Timing: flexible

Need a smoke alarm fitted. Edit based on questions: there is currently a Brooks EIB 141l ionisation smoke alarm installed which needs replacing. I have not yet bought a new one but it appears EIB 146E would be the best replacement. Pics attached on the unit and where it is currently installed.

Replace the current ceiling light with a bigger Philips down light

I have a Ring camera that's been installed at home but the battery has died and I need to install a Ring solar panel to keep it charged. Will require ladder access and power tool to drill the panel mount into the wall.