Find trusted local electricians in Mill Park

Supply solar panels (15kW) and battery (50kWh) and install. Double storey house with 3-phase power

I have an LG split system that is refusing to run. It is giving me 4 yellow lights and 2 orange lights as the error.

I have old lights in all rooms (non-LED). - 3 bedrooms: Replace old lights with new 32.8 cm Aaron LED lights (same spot) - Multiple Areas 6 lights: Remove old bulbs and replace with Arlec LED downlights (same spot) - Lounge: Remove 3 current downlights and 1 pendant light. Fill their holes. Create 6 new holes and install 6 Arlec downlights with dimmer. - All areas (5 in total): Move switches from door frames to wall next to it. (Wall is all plasterboard/drywall). - Laundry and 1 Bedroom: Replace existing switch board with a new one (same spot) Requirement: - Needs to be licenced and insured electrician - Clean and Great craftsmanship - Thoroughly install wirings with no hazard - Have their own tools Please see photos for more information. I will provide the lights.

Need help in figuring out what's wrong with our aircon . It's an LG aircon that has 4 green lights and 2 orange lights. Refuses to run. After we turn off electricity in the house and turn on it runs for a bit and does this again. We have tried cleaning the filters.

I need two indoor electricity plugs put in

We need a licensed electrician to relocate an existing power socket in our kitchen. As shown in the attached images, the current outlet position prevents our fridge from fitting properly in the allocated space. We would like the power socket moved higher on the wall to create enough clearance for the fridge. Move/uplift the outlet to a higher position on the wall

New power point to be installed on a wall There is no power nearby Its a single story house

Not sure what’s wrong but I need my air con fixed. 2 weeks ago it stopped turning on and not it shows E1 sign. Tried turning switch board off and on which makes it work for 30 seconds then turns off.

We have single story, tiled roof, ducted heated house. We are eligible for government rebate. I am looking for 5 indoor units and 1 outdoor unit. Would like total to be $3000 or less. Can you send quotes for 1 or 2 different brands. Located in Mill Park. Floor plan is provided, with locations of where AC units need to go so you can judge price for internal vs external wall installation.

6 power points put in internally, mainly for hanging tvs. I've also added in a wall in the lounge room and needs new power ran and tv antenna plug in there too. Also a power point outside in the alfresco area.

Split Ac to install, upstairs on a double storey house, back to back is fine

Need aircon installed Bedroom size is 9.5 m2, so something between 2.6-3.5 kw reverse cycle. AC will be mounted in interior wall, no space elsewhere in room. Outdoor unit will be on opposite side of house. I would like you to provide a supply and install quote, and an install quote only. I might purchase my own indoor and outdoor unit soon as well.

Install 1 MIDEA SPLIT SYSTEM UNIT 6900W in a single story unit

Need an electrical safety check - Report, Residential Tenancies Regulations 2021 completed for a rental Property.

For my kitchen renovation, I need a licensed electrician to add two new power outlets, slightly relocate a few existing ones, and install three downlights. Need a second visit for fit off and a certificate.

The NBN FTTP NTD or connection box and power supply is mounted up high on the wall. I'd like it relocated about 1.5 meter below. Please see attached images. Additional power outlet is also required next to the new NTD location.

I need power point for the cooktop (there is power line coming into the oven (right underneath the cooktop). I just need power point for the cooktop as I recently installed the cooktop. Must be certified electrician

Supply 26 x IC4 downlights and replace existing downlights

Supply and install IC4 downlights - replacing existing hard wired downlights

Seeking a licenced electrician to: ▪️Install x 2 light fittings (Provide 1 x batten holder) ▪️Fix / install new shower fan (suspected not connected properly - will need fan to be provided if old one unrepairable) 1. Install Gigi flush mount fitting to replace existing old flush mount square fluorescent light fitting 2. Install Rose batten fix light fitting to replace existing old flush chandelier light fitting. Please note there is no existing batten holder & one will need to be provided & installed. 3. Reconnect existing new shower fan that seems to not be working when turned on. Has sound of motor running but blades in fan are not turning. Maybe a dodgy previous installation by past tradesman. Job available from the afternoon of Sunday 7th Sept, or in the evening during a weekday next week. Should be a quick straightforward job with the potential for more light fitting installations in the near future. Job location is Mill Park Seeking best price for the job for immediate start