Find local NBN electricians in VIC

Currently the builder has a conduit in front of the property but no pit in front of my property. Need a conduit from the pit in front of my neighbour's property to the conduit. About 15 meters away. My neighbours driveway is also in the path. Thanks

I need a licensed electrician or experienced cabler to install a conduit for an NBN connection. NBN has advised that a conduit must be installed before they can proceed with the installation. Scope of work: • Install a suitable conduit from the external NBN entry point to the lounge • Route the conduit • Ensure the pathway is compliant with NBN standards (including appropriate bends, weather sealing, and entry/exit points) • Leave a draw wire/string inside the conduit for NBN technician use • Ensure neat finish internally and externally

Need an electrician to run Hfc of rg6 cable from NBN box to my office (about 15 meters) Will likely need to be in roof, I don’t think you will need to drill anything

An nbn box needs to be moved about 1m to the left on the other side of a switchboard

I have an old telstra wiring box I want it removed, but with the nbn cabling which is part of it reconnected after removal. In the photos you can see the conduit in, the conduit out as it goes through the wall (to the port) and the overall box

I need a small hole in the wall fixed. Drywall where the nbn bracket goes. Please provide all materials. Anytime is ok.

hole in wall where my NBN cable comes out

Hi, I have a connection issue in my new apartment. The ISP said the line is active to the MDF, but there is a fault or a missing jumper between the MDF and my internal socket. Are you a licensed cabler who can do MDF jumpering?

We have an nbn box mounted over plywood, we need the box temporarily moved just to remove the backing, then reattached to the same location

I need an Ethernet port installed from my NBN box in my garage to my downstairs living room. There are existing Ethernet ports located upstairs. Double storey house.

Need help connecting my NBN modem to pre-existing connection. Have tried to do it myself with no luck! Hopefully should be straight forward for someone more tech savvy! Have included photos of my modem and connection point as best I can.

hole in wall where my NBN cable comes out

Need assistance in installing an internal conduit with drawstring for NBN installation. We have a 2 storey townhouse and looking for advice on best place to install this. After the internal conduit has been built NBNco will install. The electricity box is located on the wall just outside the garage. See below photo. Pls let me know if you need more information.

Looking for a licensed cabler or experienced NBN technician to run an existing Ethernet cable from the building MDF to a floor-level location. Details: Cabling only – no device installation No ceiling work No terminations required (pre-made cable provided) All pathways already exist Straightforward MDF-to-floor cabling job What’s provided: Pre-terminated Ethernet cable What you need: Basic hand tools ACMA cabling license preferred Estimated time: 30–60 minutes

We need someone to dig a ca 8m trench for an NBN conduit. It needs to be 30 cm deep and runs from the house to the boundary. Ideally we want to keep the grass to cover it again. NB: the photo shows the front of the house. The trench needs to be slightly to the right. It’s a clear strip from the house to the boundary.

When I plug the wall socket in my nbn machine starts clicking and blinking red, when I take it out it blinks blue. I believe its a line error on the property and need an nbn technician to take a look and repair if needed

Need experienced network technician/data cabler to: • Install new 12U wall mount rack cabinet (Dataworld RW-12R-450 or similar, ~450mm deep) in garage wall space shown in photos • Consolidate garage NBN box + relocate Hikvision NVR/cabling from bedroom into new rack • Mount in rack: Synology NAS, NetMesh20 router • Test all connections (internet, cameras, power) Equipment provided: New rack cabinet, all networking gear.

Hi there 👋 I had an NBN fibre upgrade appointment, but the technician couldn’t complete the installation because I wanted the indoor NBN connection box/modem installed in my closet (where my current setup is). He said he couldn’t use the existing cable path as it runs inside the brick facade, and therefore couldn’t get a new fibre through to that point. He also didn’t install the outdoor unit for the same reason. He advised me to get a licensed electrician/data cabler to: Create a new cable path or conduit from outside (where NBN will mount the outdoor unit) to the closet where I want the modem. Ensure the cable route is ready for NBN to return and complete the fibre connection. Job details: Single-storey brick home 🏡 Need neat, NBN-compliant cabling or conduit installed Easy access to both outdoor wall and closet Just need the cable path ready — NBN will handle the fibre install once this part is done Timing: Flexible — weekday or weekend is fine. Please quote only if you’re a licensed cabler or electrician experienced with NBN fibre or data cabling. I have attached pics of existing connection from outdoor unit to indoor modem in my closet

Need to change HFC NBN port location. Currently it's in the living room and i'd like to change it to my bedroom. Theres an old ADSL port thats currently in the bedroom which might help with drilling.

Move NBN from front of the house to the study cupboard. Recent renovations and electrician advised there was plenty of cable for this if we wanted to do it in future. Single story home. Tiled roof.