Find trusted local electricians in VIC

Looking for a licensed and insured electrician to carry out a combination of new installations, cable relocations, light removals, and a general electrical safety check across our home. ​Key Requirements & Scope of Work: ​Cable Relocation & De-energising: ​Remove redundant wiring and relocate active cables out of the proposed bedroom-to-ensuite doorway frame. ​Lighting & Exhaust Fans: ​Remove existing light fitting in the ensuite zone. ​Remove an existing light fitting in 2nd Bedroom and cap off safely. ​Install and wire new downlights for both bathrooms. ​Install and wire an exhaust fan for the common bathroom. ​Power Points (GPOs) & TV Points: ​Install vanity power points in both bathrooms. ​Install a double power point in the laundry for the washing machine and dryer (to confirm/verify power draw requirements and circuit capacity). ​Install additional power points in meals, Living Room and Bedrooms. ​Whole-House General Electrical Check: ​Inspect and test all existing power supply, wall plug points, and major appliance connections for safe operation. ​Check/test existing TV point(s) for proper connection and signal/power safety. Important Notes for Bidders: ​Licensing: Must be a fully licensed electrician (REC / Electrical Contractor License required). ​Compliance: Must issue an official Certificate of Electrical Safety / Compliance upon completion. Fixtures: Please state in your quote for labour only. Materials will be provided once you list.

Hi, I need a licensed electrician to install two dedicated circuits 10m about in my kitchen: 1. Induction cooktop: Run a new 6mm² cable from the main switchboard to the induction cooktop. This must include an isolator switch and RCBO protection. 2. Oven: Run a separate dedicated cable/circuit from the oven back to the switchboard. Requirements: · Must be a licensed electrician · Must provide a Certificate of Electrical Safety (COES) · Work must comply with AS/NZS 3000 · Please provide a fixed quote including materials and GST · Please confirm cable route and whether any extra work is needed after inspection I’m looking for a clear, itemised quote and someone who can do the job properly and safely. Please only reply if you are licensed and can provide the compliance certificate.

Just built new 4 car colorbond garage. Needs power points and lights installed.

I need an electrician to do the following in a newly built ward robe: 1. Add LED (warm white dotless) lights to the wardrobe, power point already externalised, grooves and channels already in place. 2. Shift two existing and working downlights by 30-50cm and install and connect them to a motion sensor. Located in Keilor East. Available after hours or on weekends. You will provide the material and I pay for them separately. LED channel lengths are: Four 110 cm channels Six 190cm channels Four 215cm channels

Central air con controller touch nit working and one of the rooms outlet doesnt blow air

I have 5 lights I need installed above my Kitchen island. There is one batten point already so 4 additional points required. Must be qualified.

Hi, I’ve purchased a commercial Roband G700 electric griddle. Specifications: * 4,240W * 230V / 400V * 18.4A total * Currently configured with L1, L2, Neutral and Earth terminals. According to Roband, it can be installed on either a dedicated 20A single-phase circuit or a two-phase + neutral supply. I’m looking to install it in my domestic kitchen in Melbourne. Could you inspect my switchboard, confirm which configuration is suitable, and quote for installing the appropriate dedicated circuit, isolation switch and connection? Thanks.

Need 15amp outdoor socket for spa plug in. We have outdoor 10amp socket but need changed or one installed next to current 10amp - Mentone area

Remove old pendant light and replace with new one. Lightswitch exists

Looking for a electrician to replace the function selector switch on our built-in Belling IB609FP electric oven. The function knob snapped off and the switch shaft broke flush with the switch, so the switch needs replacing. Everything else on the oven was working fine before this. We have the replacement part ready (Glen Dimplex part [22102002 / 20884983]). We believe the job may involve: - Isolating power and sliding the oven out of the cabinet - Removing the control panel (it has a glass front, so please take care) - Swapping the old switch for the new one and transferring the wiring - Refitting the oven and testing each function We are open to fixing it other ways though if you can think of any. Photos of the broken knob and switch are attached.

Need 2 fluro lights changed in garage Both are broken You can supply the 2 light fittings or I can whatever works better

Buy and install new downlights. Total of 6.

I've just moved into a 6-year-old, 2-bedroom unit in Broadmeadows and want the electrics checked by a licensed electrician. The job: • Check the smoke alarms. A recent building report wasn't clear whether any are fitted and working. Supply and install compliant interconnected smoke alarms where needed (please quote parts separately). • Test the safety switches (RCDs) and check the switchboard • General electrical safety check of power points and light fittings • Fix the rangehood lights, which aren't working • Replace any missing or dead light globes Requirements: • Licensed electrician (please include your licence number) • Certificate of Electrical Safety for any work that needs one • Public liability insurance

Water heater went off, not turning on Used a lighter to turn on the pilot but letting go off the pilot button turns the pilot off

Need an electrician to installa ceiling light. I have attached the photo and dimensions including weight. It need to be installed on ground floor of a Double Storey house. Please quote.

I have a power outlet that is coming of the wall that needs fixing or replacing. The outlet itself currently works fine. Plus I have 2 light switches as per attached that needs fixing or replacement. They work but sometimes the switch is loose and the lights flicker. See images. Only qualified electricians that can provide electrical certificates to quote please

Looking for a licensed electrician to complete the following at my home in Brighton: 1. Install 1 new double GPO (power point) in each of my two children's bedrooms. Both are on an external wall and to the bottom right of the windows in the picture. 2. Wall mount my TV in the living room and connect power concealed wiring. There are existing GPOs on the wall. Details: • Wall type for TV is plasterboard • TV bracket is provided • Roof/ceiling access if required • Nearest existing power point to each new GPO is about 3m and is on internal walls Requirements: • Must hold Victorian electrical licence • Public liability insurance • Please send a fixed price quote, including materials

Hi I need about 4x light fittings removed and made safe for painting. I also need 4x light fittings removed and plugged off for painting. The fans and light fittings will be binnned and will be replaced in a week or so when painting is done. Need done before this Tuesday when painter starts. Single storey 2.1 ceilings small unit and completely vacant. Scope for more work. Thanks in advance. Update: if you can do before Monday great. Must be licensed and can provide invoice. Please advise.

Looking for a licensed electrician to install a new pendant light and a wall switch. The light: Lucci Fjord 1 Light Large Dome Pendant in Clay Gypsum (Beacon Lighting, SKU 018179) - 600mm wide x 260mm high - Weighs 10.2kg, so it needs to be securely fixed to a ceiling joist or proper support, not just plasterboard - 2m suspension, to be cut/adjusted to the right drop - 240V, 1 x ES (E27) globe, max 45W - Installation instructions: https://assets.beaconlighting.com.au/assets/018178-018179__FJORD_LRG_DOME_PDT__IM__v1.0__%282024-5-20%29.pdf

Just changed a switch over electrics are fine