Find trusted local electricians in Box Hill VIC

None of the lights in the house are working. The “Protected Light” breaker trips immediately when it is reset. Looking for a licensed electrician to attend, fault find, and repair the issue on the spot if possible. Please check the lighting circuit, light switches, wiring terminations, and switchboard breaker/RCBO to identify and fix the fault. It may be a faulty cable, loose termination, light switch, or breaker, but I need the exact cause diagnosed and repaired. Please only respond if you’re able to carry out the repair, not just provide a quote for a full switchboard replacement. If major work is genuinely required, please explain why before proceeding.

Damaged socket-out, faulty/loose socket mechanisms to be replaced; Fault location: Kitchen bench, cooktop connection switch, please see photos In compliance with AS/NZS3000 4.4 Socket-Outlets

need an electrician to install a plug near toilet seat. nearest plug is 2m away

I have a power outlet circuit tripping instantly with everything unplugged, so I need an electrician to investigate a hard fault or short circuit in the permanent wiring. COH

Need a licensed electrician to install this overhead light in our bathroom and hardwire it into the existing lighting. https://www.ikea.com/au/en/p/flaskpost-led-cabinet-wall-lighting-chrome-plated-40591091/

Need help with rewire controlled load (hot water) to the main phase in switchboard. I have solar and battery. Trying to eliminate drawing power from the grid.

Need 15 downlights, 5 new power points and 2-3 powerpoints replaced.

Exhaust fan in kitchen is not working Need an electrician to fix it urgent (Pensioner's home, low budget) Thank you

Fixing switch board and installing a new switch board

Install down lights (12-16), center light in hall, and replace other existing down lights (white)

Position is close to the main switch

Single storey home with tiled roof. Looking to upgrade an old switchboard by replacing all current circuit breakers with 20A RCBO safety switches (where wiring permits), to meet modern safety standards and reduce frequent tripping. Also need 2–3 additional 20A circuits installed to split the load from high-usage appliances (4 heaters, air fryer, electric pressure cooker, steamer, TVs, computers). Wiring should be assessed to ensure safe load capacity. Certificate of Electrical Safety required.

Change two down-lights on an awkward flight of stairs

Looking to get a quote on: Installing security lights Moving powerpoints Moving internal circuit Moving switches Moving HVAC - to potentially be done another time, so if you're not experienced in HVAC for this particular quote thats ok.

Some of the wall power outlets in my home (apartment)is not supplying electricity. When I plug something into it, I hear a slight buzzing or crackling sound. I need a licensed electrician to inspect the issue – it could be wiring or the outlet itself. Location: boxhill, VIC Time: Flexible, but preferably as soon as possible. Please bring basic diagnostic tools.

Three GPOs from adjacent power points One flood light from existing dedicated wiring Provision for a strip led from adjacent circuit One downlight using existing switch ( extra wire already existing in the ceiling)

RCD keeps tripping unplugged all sockets, not an immediate trip need electrician to check wiring and breaker Box Hill

Install downlights in 3 rooms - Approx. 12-18

We need someone to switch the pilot light back on a 130 litre Rheem gas Hot water heater.Box Hill.

I have 4 broken or stuck light switches and power point that needs to be replaced by a licensed electrician. Note: electrician to provide materials, and issue a certificate of electrical safety