Find a reliable computer and IT professional in Outer East Melbourne

I have a dual monitor arm and two monitors I need set up. It has instructions but I can’t figure it out 🤦‍♀️

Connect Ethernet cable to my granny flat

The incorrect PSU was used and the printer no longer turns on. Wanting someone to analysis the faulty component and repair the board

Cracked laptop screen need to be replaced. The lap works perfectly when connected to external screens. HP Prox360 435 13.3 inch G9 Notebook PC Details are in the photos. Happy to bring it in or be replaced at home.

3.5mm headphone jack is damaged and needs replacing

I need to relocate my NBN HFC box from the main lounge area to underneath the stairs approximately 2m away but nearer to the external NBN incoming box. There is good clear below floor access as the home is on a sloping block. There are also some CAT type cables and foxtel cables already running to the understairs location, but these are unused by me and I assume installed by the previous owner.

CAT6 data cabling installation to 8 locations on our existing 2 storey home. They should run to our room under the stairs and terminate onto wall plates

My father cannot get emails or do his 20% rebate on services Australia website or get his nbn to work with the sim, or UTube on his iPad so I’m wanting someone that’s tech savvy who is wiz bang to knock this out of the park, patient with older people but knows exactly what to do would be magnificent

We have bought second hand Konica-Minolta Bizhub press 6000. We have difficulty starting up. (It was running condition before) I would like to get printing machine expert to come and take a look at it my factory. The task include setting up , trouble shooting, basic maintenance and so on.

We are happy to drop it somewhere local. Just not sure who does this type of repair.

Need virus removed off my laptop after a scam

Put together flow hive and frames as per online instructions. No tools needed.

I need some help with creating spreadsheets for an accounting assignment

Title: Extend NBN/Internet Connection & Install Wi-Fi Access Point at Rear of House I’m looking for an experienced network technician or licensed cabler to improve the Wi-Fi coverage in my home. Current setup: * The modem/router is located in the front living room. * Wi-Fi signal is very poor at the rear of the house. * Single-storey home. What I need: * Run an Ethernet cable from the existing modem/router to the rear of the house. * Install a new Wi-Fi access point (or suitable secondary router configured as an access point) at the rear to provide strong wireless coverage. * Ensure the new access point is properly configured and seamlessly extends the existing network. * Test the connection and Wi-Fi coverage before finishing. Please let me know: * Whether you are a registered cabler (preferred). * If you can supply the access point/router or if I should purchase one separately. * Any recommendations for the best setup after inspecting the house. Please include your experience with home network installations and what’s included in your quote.

Hi, I have just built a brand new PC and I need help getting it working. Looking for someone experienced with PC building, Intel systems, DDR5 memory, and BIOS troubleshooting. The PC powers on, but I cannot get any display output or enter BIOS. I need someone who can troubleshoot the issue and help fix it (including BIOS update if required). specifications: * Motherboard: MSI PRO B860M-A WIFI * CPU: Intel Ultra 5 250K Plus * AIO: Arctic Liquid Freezer III 240 * RAM: V-Color Manta XSky RGB DDR5 6000MHz CL36 32GB (2x16GB) * GPU: Using IGPU * SSD: Lexar NM620 256GB PCIe Gen3x4 M.2 2280 * PSU: Corsair RM650e (2025) Fully Modular Current issue: When pressing the power button, the PC does not display anything on the monitor. Originally, the startup sequence was: 1. CPU red debug light flashes briefly (~1 second) 2. DRAM yellow debug light turns on for around 3–4 seconds 3. PC stays on for around 30 seconds 4. CPU red light flashes again 5. PC restarts automatically This reboot cycle repeated around 5 times, then sometimes the PC would stay powered on: * RAM RGB on * Arctic AIO running * Case fans running * No debug LEDs staying lit * But monitor still shows “No Signal” Troubleshooting already attempted: * Cleared CMOS multiple times using motherboard Clear CMOS button * Tested both RAM sticks separately (one stick at a time) * Reseated RAM multiple times * Removed RAM completely to test motherboard DRAM detection * Reseated CPU * Tried different HDMI cables * Tried different monitors * Tried to enter BIOS using Delete key Additional info: * I do not have a wired keyboard, only a wireless keyboard with USB receiver * The mb does not appear to have a BIOS Flashback / Flash BIOS button, so I cannot update the BIOS myself without the system successfully POSTing. * I also tested the system with no RAM installed: * DRAM yellow debug light stays on continuously * No reboot loop occurs * No display output * No beep (no motherboard speaker connected)

Need someone to come and relocate NBN point Just moved in and the point was in the back bedroom. Access via subfloor. I only need it moved to an adjacent room a few metres away to an existing Telstra point

My mother retired 2 years ago and her company left her her laptop. It is locked to that company and I need it reset for personal use.

My laser printer has a severe paper jam — the paper has shredded and is stuck inside the rollers. I’ve tried removing it by hand but can’t get it out. Need someone to carefully remove all paper fragments and do a test print to confirm it’s working. Should be a quick job for someone with printer/tech experience

Install Ethernet cable. Cable is supplied

Have moved to mums need internet connection have cable for tv and WiFi box