Find a reliable computer and IT professional in North Brisbane

Need an ACMA-licensed data/antenna cabler to activate or relocate an NBN HFC coax outlet. House has existing Foxtel coax points. Need the active NBN HFC line moved to another room

Nikon D5100 DSLR Press Shutter Release Button Again Issue Need to get it Fixed

I am looking for a licensed electrician or registered data cabler to install permanent wired Ethernet connections in my home. - Timber Queenslander with VJ internal walls - Router and NBN connection are downstairs - Easy roof access - Run Cat6 Ethernet cabling from the downstairs router location to two upstairs offices - Office 1 is directly above the router location, approximately 3 to 4 metres vertical run - Office 2 is upstairs at the opposite end of the house, approximately 15 to 20 metres cable run - Install neat wall plates in both offices - Single Ethernet point per room is fine, but happy to quote double points if the extra work and cost is minimal - Terminate cabling neatly near the router using proper data terminations - Cabling to be concealed within walls and ceiling cavities where possible - Short visible conduit is acceptable if required, but not preferred

Hey all I have a Internet plugs in my house that don’t work, next to my modem there are the cables that should be the ones you plug into the modem and it goes to the wall

Phone screen was smashed late last year and phone got wet and then would no longer turn on/charge. Need data recovered if possible.

Will need to do the following. • Setup unifi gateway with 4g router on the Clients unifi account • Enable port 4 as a WAN port(dhcp) • Move 4G router to port 4 • Setup draytek router(should already be in bridge mode) on port 5 of the unifi gateway on DHCP • Replace the existing switch with a UniFi Poe switch. • Plug 2 access points into the UniFi switch. • Provide remote access to allow for the adoption of the hardware. • Once the hardware is adopted and configured, move 1 access point to a central location in the spa. • Power the access point that has been moved with a Poe injector and mesh it with the UniFi access point that is still under the counter. • Confirm the entire spa has suitable Wi-Fi coverage to support their functions. Log and report speeds in key areas at the site. • Ensure this is done with as little down time as possible (connect at least 1 computer and eft machine to site mobile hotspot so they can continue to transact

I have an Aussie Broadband home (HFC) internet with a TP-Link WiFi-7 router. I have used a few switches some with POE. Main router covering the entire house is Ubiquity 6LR. I have chosen a name for its SSID. I want someone to go through all appliances and make sure that they are on the same network. Eg Tesla gateway, Air conditioners, TV, AVR, Security network, Fronius Inverters, Anything that comes with a wifi. (90% of them are already connected to the desired SSID) I want someone to teach me how to manage my home network (both wired and wireless). I want the TP link router to broadcast its internet via the same SSID as the Ubiquity LR6. route to broadcast an SSID with its name. I am going to change the internet provider. Photos and amendment to the task list by tomorrow after I try to connect everything to one SSID myself. In person only. Explain features of Tesla App, Sigen App (charger), help decide some settings

Replace the existing switch with a UniFi Poe switch. Plug 2 access points into the UniFi switch. Provide remote access to allow for the adoption of the hardware. Once the hardware is adopted and configured, move 1 access point to a central location in the spa. Power the access point that has been moved with a Poe injector and mesh it with the UniFi access point that is still under the counter. Confirm the entire site has suitable Wi-Fi coverage to support their functions.

Key Collection & Keysafe Install Return to map Posted by Brandon I. about 1 hour ago Location Boondall QLD 4034, Australia View map To be done on On Tue, 9 Dec - View all the details of this offer: https://www.airtasker.com/offers/01KBM5KGVRXA210P7NXEMSC2JR

Wanting to find someone who can assist me with a custom loop liquid cooling build for my current air cooled PC. 5070ti X870e motherboard R9 9950x3d Looking for pre start quotes and prior proof of experience and references for similar or the same job Ill be starting this job at 1000 bucks. I know this will be more

Physically Install computer and speakers at a computer desk.

I need someone to help set up a laptop docking station and connect all peripherals

Format computer and re install window 11

Having connection issues with our internet , and Bluetooth of keyboards , passwords saying comprised

The customer is having connection issues and their internet, Bluetooth keyboards and passwords are saying it was comprised.

Need my laptop screen replacement. Screen cracked. Partial display working. Flickering present. Need the quote to include labor and material included. Dell Inspiron 14 7000 laptop. Non touch screen.

Someone has hacked into my email threatening to expose everything if I don’t send them $500US in crypto currency. They have been logging into all of my applications with the same email and changing my passwords on them.

Need the dashcam to be installed and working properly with the App connected

Need RAM replace in Dell XPS 15 9500 laptop, already have RAM just need someone who knows what they’re doing and appropriate tools

I live in a building with a public wifi. I have purchased a personal router and need an access point setup through the router so I have my own secure network from the available building wifi. TP-Link Archer C20 AC750 Dual-Band Wireless Router