Find a reliable computer and IT professional in Brisbane

I have a older Gaming PC that is overheating because the CPU Fan has stopped. I have had it fixed at Umart a few months ago but just want it to hold out for another couple of months yhen I will upgrade.

Setup and Install Microsoft Teams Room Devices. Current room is setup as a Zoom Room. The main tasks are the ff Remove current Zoom Room Devices -PC - Ipad Controller -Camera -Speakerphone -Cables Install New Microsoft Teams Room Equipment -Dell Optiplex PC -Logitech Tap -Existing Camera -Existing Speakerphone

I've severed the fibre optic cable leading to my internal NBN box. The cable sever is very close to the internal NBN box. The external NBN box is at the front of my house and the cable runs inside a conduit along the exterior of the house, approx 15 metres. I need the optic fibre replaced so the internet is operational, however I'd prefer the NBN box be relocated at the same time, closed to the front of the house. I can prep all the conduit and hole to the inside of the house, all I need is the fibre run and terminated.

Assembling custom water-cooled PC . Have already purchased all the parts .Case: NCASE M2 Black Grater Motherboard: Asus ROG STRIX B850-I GAMING WIFI Mini ITX AM5 Motherboard CPU: AMD Ryzen 7 9800X3D 4.7 GHz 8-Core Processor GPU: Inno3D X3 OC GeForce RTX 5080 16 GB Video Card PSU: Corsair SF1000 (2024) 1000 W 80+ RAM: G.Skill Flare X5 64 GB (2 x 32 GB) DDR5-6000 CL30 Memory Watercooling Loop Components: Radiators: Alphacool NexXxoS HPE-45 Full Copper 280mm Radiator & Black Ice Nemesis Radiator GTS 280 Fans: Noctua NF-A14x25 G2 & Be Quiet! Silent Wings Pro 4 CPU Block: Barrow CPU Block Pump Reservoir Intelligent Three In One , For AM5 GPU Block: Alphacool ES RTX 5080 Reference 1-Slot-Design with Backplate

Must have Networking degree or certifications on enterprise grade LAN networks. The current router is Aruba with TPLink APs that are unable to add new users. The network is also connected to printers, VPN config etc. so DDNS config experience is must to ensure existing infra is not broken. We need to check why new users are unable to join the network and resolve the issue. You should have your own equipment to connect with router/ switch or modem.

Convert 5K Retina display to standalone display. Would like working HDMI, Thunderbolt and power button. Will require driver board (will reimburse).

Date and Time ETA: Monday 17th August 2026 at 6:00 PM Site Address: Location: Bowen Hills, Brisbane, QLD 4006, Australia Scope of Work: Scope of Work: We are replacing the 3 old access points with new ones. For this task, the engineer will need to carry a ladder to access the ceiling, remove the existing mounting brackets, install the new mounting brackets, mount the new access point, and reconnect the network cable. Resource Level: Level 2 Required Tools (In addition to standard toolkit): 1 Ladder to remove Existing Access points and install new Access point. (Ceiling height is 3 meter) 2 Required necessary tools to remove existing mounting brackets and install new mount brackets 3 Engineer should carry Insurance Certificate and SWMS certificate as per Australia work standards.

Our home internet is currently not working and we need someone experienced with NBN connections, home networking and routers (preferably Eero) to come onsite and troubleshoot/fix the issue. Our internet provider and NBN have tested the connection and confirmed that the NBN service is up and operational and the NTD box is online. We need someone who can: * Check the NBN NTD and UNI-D Port 4 connection * Check the Ethernet connection from the NTD to our router * Troubleshoot and reconnect our **Eero router/home Wi-Fi network** * Check WAN/router settings and configuration * Determine whether the issue is with the router, cabling or home network * Ideally get the internet and Wi-Fi fully working again while onsite The NBN provider has confirmed no service dropouts over the past two days, so this appears to be an issue somewhere between the working NBN connection and our home network/router. Looking for someone experienced specifically with NBN + home networking/router troubleshooting, rather than general computer support.

My charger cord broke but adapter is fine but I have a broken h and n injuries and need access to my laptop

My computer liquid cooler has failed I think, and the PC will no longer boot up past the fail screen, forcing it to go into the setup screen when I press F1. I think it is trying to protect the motherboard from overheating which makes sense. The fans are all spinning, but last night the ones at the front were spinning at 1000rpm, leading me to think it's pushing the front fan into overdrive to compensate for the AIO not working. The AIO liquid cooler showed no activity in the F1 boot up screen leading me to think it has failed and needs to be replaced. Job is for someone to come out this Saturday with the correct or better quality part, and replace the damaged part or remove the liquid cooling system, and install a noctua nh-d15 or similar quality fan cooler. My PC knowledge isn't super extensive but that's the recommendation I was given from our IT guys at work. current specs are: -Intel Core i7 7700K processor -Corsair Hydro Series H100i Liquid CPU Cooler -ASUS Prime Z270-A Motherboard -MSI RTX GeForce 3060 Gaming X 12GB -16GB Corsair Vengeance memory -Intel 600P Series 256GB M.2 SSD -Seagate 7200RPM 2TB hard drive -Phanteks Eclipse P400S Tempered Glass Glacier White -Be Quiet! Pure Power 9 600W Power Supply Note: quote to include provided parts.

I have bought a laptop from CEX but it's locked from an institution. I have reinstalled windows however it come back to same homepage to use the institution microsoft account. I have the purchase receipt of the laptop.

Need to download all existing files and then restore to original settings

I have recently moved into a large apartment block. I am having trouble getting my new internet service to work. Would like someone to trouble shoot the issue for me. I am available weekends and weekday evenings.

My gaming pc recently moved a few kms in the back of my car. Since then the pc has struggled to get past booting and in bios the NVME isn’t there. I reseated this as well as the ram

I need someone to come to my home in Brisbane to set up a brand new Mac Mini M4 from scratch. The Mac Mini is plugged in and ready to go but I don't have a USB-C to USB-A adapter to connect a keyboard and mouse (the M4 has no USB-A ports). You will need to bring your own USB-C keyboard and mouse, or a USB-C hub/adapter. Here is exactly what needs to be done: Complete the initial Mac Mini setup wizard (language, region, wifi, computer name, password) Download and install RustDesk remote access software from github.com/rustdesk/rustdesk/releases/tag/1.4.6 - specifically the aarch64.dmg version for M4 Configure RustDesk with a password and provide me with the 9-digit ID and password so my developer can connect remotely going forward The Mac Mini needs to be named "BossMoney-Server" during setup Please only apply if you are comfortable with Mac setup and have your own equipment. Brisbane southside preferred.

Setting up microsoft business email account and need to link to domain

MyClaw AI Bot Setup - Need someone who is an expert to come and finalise my setup, very basic, I have Whatsapp Business (with new allocated mobile), FB / Insta meta all setup, linked ads, run remotely off whatsapp, all systems are setup, just need them connected and working basically, if it takes more time I will pay accordingly.

We have super fast NBN but it is only usable at one end of the house. Help with troubleshooting my computer dock to work out why external monitor is no longer recognised Printer not printing (I’m certain this is a network issues as it has previously been reliable

In need of urgent help connecting 20 Meross smart plugs to existing wifi. Should be a simple job for the right person.

I’m looking for an expert in home cabling and WiFi for troubleshooting issues with current home cabling and recommending solutions for improving WiFi signal strength. Must have cabling / switch / NBN / WiFi expertise. I have a current set up that doesn’t see my to be working at 100%. I need advice on what needs upgrading.