Find a professional computer repair service in QLD

Looking for someone experienced with PC building to transfer my current PC components into a new Montech AIR 100 ARGB case and troubleshoot an existing RAM/startup issue. I also have a new DeepCool AK400 CPU cooler to install. Work required: Transfer all existing PC components into the new Montech AIR 100 ARGB case Install DeepCool AK400 CPU cooler with fresh thermal paste Connect and configure all 4 included case fans and ARGB lighting Proper cable management Remove/reseat RAM and check RAM slots/connections Troubleshoot an intermittent 4-beep issue on startup Test each RAM stick individually if necessary Run a memory/RAM stability test Check BIOS/POST for any issues Check CPU and GPU temperatures after rebuild Confirm all case fans are installed/oriented correctly for good airflow Run a basic load/stress test after completion to make sure temperatures and system stability are good Current motherboard is an ASUS ROG Strix B460-I Gaming (Mini-ITX). PC is currently working, but occasionally gives the 4 beeps on startup. I already have the new case and CPU cooler. Looking for someone who has good experience building and troubleshooting gaming PCs, rather than just doing the physical case swap.

As previously mentioned in the last field im putting $50 because i have to put something in and i have no idea what this stuff costs, looking for a quote.

I need suggestions for the dual monitor set up and then based on the suggestions we buy the monitor, arms and the set up and you can do the full dual monitor set up .

I was hacked so i need to see if im no longer hacked and also i lost my favourites/ bookmarks from the hacking and theres no restore point set up ... i dont want this done remotely i will come to you or you come to me.

Setting up a PC and connecting to computer and play station

Need someone who can help set up quote and invoice templates and a signature page on a apple computer

PCR, I have had to wait over 45min for the plumber to finish works before I could leave with keys

Windows computer is very slow, not responding, freezsing, wheel of death is showing. We have shut down, and restarted. We have turned off programs we do not need.

I need some one that is tech savvy to come set up OBS for whatnot and my thermal lable printer plus show us how to use it

Business with issues with wifi / set up new router and set up devices to join as needed

I need to swap out my PC cooler with a new one. I previously had a CoolerMaster AIO, now have a ThermalTake AIO. Need to get them swapped over and I'm just not interested in dealing with it.

I have a older Gaming PC that is overheating because the CPU Fan has stopped. I have had it fixed at Umart a few months ago but just want it to hold out for another couple of months yhen I will upgrade.

Hi I’m no slouch but I need some help setting up a new house with Wi-Fi multiple TVs and some are connected to old apps which is causing confusion. Need some basic advice on setup of devices and new laptops etc in the house with the current NBN. I have happy to pay an hourly rate for ongoing assistance.

Assembling custom water-cooled PC . Have already purchased all the parts .Case: NCASE M2 Black Grater Motherboard: Asus ROG STRIX B850-I GAMING WIFI Mini ITX AM5 Motherboard CPU: AMD Ryzen 7 9800X3D 4.7 GHz 8-Core Processor GPU: Inno3D X3 OC GeForce RTX 5080 16 GB Video Card PSU: Corsair SF1000 (2024) 1000 W 80+ RAM: G.Skill Flare X5 64 GB (2 x 32 GB) DDR5-6000 CL30 Memory Watercooling Loop Components: Radiators: Alphacool NexXxoS HPE-45 Full Copper 280mm Radiator & Black Ice Nemesis Radiator GTS 280 Fans: Noctua NF-A14x25 G2 & Be Quiet! Silent Wings Pro 4 CPU Block: Barrow CPU Block Pump Reservoir Intelligent Three In One , For AM5 GPU Block: Alphacool ES RTX 5080 Reference 1-Slot-Design with Backplate

I’ve just purchased a brand-new Aftershock PC but forgot to order the RGB light strips when I had it built. I’ve now ordered the two RGB strips separately and am looking for someone experienced with building/working on PCs to come and install them for me. I’m not very handy when it comes to working inside PCs, so I’d rather have someone who knows what they’re doing. From what I understand, one connects around the motherboard and the other around the GPU, but I’ll have both strips ready to go. Should be a pretty straightforward job for someone experienced with PCs - I’d estimate around 30 minutes or so. Just looking for someone who can install them neatly and make sure everything is connected and working correctly.

We are an audio-visual installation company that is looking for someone who can facilitate the removal of a piece of hardware from an audio-visual rack at a hotel. We need someone who can facilitate the removal of a Q-SYS core, which is a simple job of unscrewing the unit from an audio-visual rack in the AV room of a hotel and then delivering it to the repair centre where it can be assessed. You would need to have only a very basic understanding of audio visual to help, and we are able to talk you through the removal of the unit before delivering to another part of Brisbane for the assessment and repair.

Need my printer connected to my laptop and need my emails connected to my phone

My computer liquid cooler has failed I think, and the PC will no longer boot up past the fail screen, forcing it to go into the setup screen when I press F1. I think it is trying to protect the motherboard from overheating which makes sense. The fans are all spinning, but last night the ones at the front were spinning at 1000rpm, leading me to think it's pushing the front fan into overdrive to compensate for the AIO not working. The AIO liquid cooler showed no activity in the F1 boot up screen leading me to think it has failed and needs to be replaced. Job is for someone to come out this Saturday with the correct or better quality part, and replace the damaged part or remove the liquid cooling system, and install a noctua nh-d15 or similar quality fan cooler. My PC knowledge isn't super extensive but that's the recommendation I was given from our IT guys at work. current specs are: -Intel Core i7 7700K processor -Corsair Hydro Series H100i Liquid CPU Cooler -ASUS Prime Z270-A Motherboard -MSI RTX GeForce 3060 Gaming X 12GB -16GB Corsair Vengeance memory -Intel 600P Series 256GB M.2 SSD -Seagate 7200RPM 2TB hard drive -Phanteks Eclipse P400S Tempered Glass Glacier White -Be Quiet! Pure Power 9 600W Power Supply Note: quote to include provided parts.

Title: Complete Gaming PC Build + BIOS Update & Offline Windows Setup Description: I need an experienced PC technician to completely assemble a custom gaming computer from scratch in Capalaba. My Components: * Case: Thermaltake View 170 ARGB (White Edition) * CPU: AMD Ryzen 5 5600X * GPU: XFX Swift AMD Radeon RX 9060 XT 16GB * Motherboard: ASUS PRIME B550M-A WIFI II (Micro-ATX) * RAM: 16GB Kingston Fury DDR4 3600MHz * Storage: Silicon Power P34A60 512GB NVMe SSD * PSU: MSI MAG A650BN 650W Required Tech Steps: 1. Physical Assembly: Safely install all hardware components into the Thermaltake case and route the cables cleanly. 2. BIOS Firmware Update: Because these boards can ship with old software, it might hit a black screen on startup. You must bring an older AM4 test CPU to boot the board and flash it to the latest ASUS BIOS version if it doesn't post out of the box. 3. RAM Optimization: Enter the BIOS and turn on D.O.C.P. / XMP to uncap the Kingston Fury memory so it runs at its full 3600MHz speed stably. 4. Software Setup: Install a clean, fresh copy of Windows 11 onto my 512GB NVMe SSD. 5. Offline Driver Installation: CRITICAL NOTE: There is no active Wi-Fi or internet at the build location. You must pre-download the official ASUS wireless, Bluetooth, and latest BIOS drivers onto a USB drive before arriving, so they can be installed completely offline. This ensures I can connect to my phone hotspot the second you finish. The build must be completed at my location so I can see it working on my monitor before funds are released. Thanks!

I’m looking for an experienced Google Home/Google Nest technician to help troubleshoot and set up my smart home devices. What’s happening I’ve spent several hours trying to get my Google Home devices working and have attempted multiple troubleshooting steps without success. The devices are not connecting or setting up correctly through the Google Home app. Looking for someone who: * Has strong experience with Google Home and Google Nest devices. * Is confident troubleshooting setup, Wi-Fi and connectivity issues. * Can identify and resolve configuration problems. * Can ensure all devices are working correctly before finishing the job. What you’ll need * Experience with Google Home, Google Nest and the Google Home app. * Knowledge of Wi-Fi networks and smart home device setup. * Ability to explain what the issue was and any changes made.