Find experienced local carpenters in NSW

This is a completed project now in the defect rectification stage. We need a cabinet maker or handyman to fix about 10 minor joinery defects across 4 new units, and a few more may come up when we confirm everything on site together. The work includes adjusting misaligned cabinet doors and drawers, repairing a damaged cabinet section, refixing a panel above a dishwasher, treating a water-marked kickboard, filling and colour-matching holes inside wardrobes, and enlarging a cabinet cut-out around a power outlet. We have plenty of spare boards, so you don't need to supply any. Please bring your own tools. The finish must be neat, as the work will be inspected. Payment can be a fixed price for the whole job or a day rate. Photos are available.

Please see attached document to get an idea of what I am after. Generally requires reconfiguration of a wardrobe, and building two bespoke cabinets. Please put a link to previous examples of your work.

This is to ask a provider on the below services, to come, measure and provide and adequate and precise quotation for the joinery works below. 1- replace existing cabinets made to wrong measure and replace with newly made to measure. See pictures, finish is polytech feathersoft 80/20 gloss 2- build custom measure free standing wardrobe/cupboard, same external finish (see sketched drawings) 3- demolish and re-do built-in wardrobe about 2.4H x 1.8W x 0.5D **please read** price is for all 3 jobs, however please do contact me to discuss more details and more accurate quotes even just for 1, or if you think the advertised budget may not be enough for all 3?

Looking for an experienced Joiner who can attach our pre-fabricated shaker doors to our Fisher and Paykel dishwasher drawer along with the kickboard we have all items ready for installation. Dishwasher has already been installed by a plumber..

Slight joinery modification to fit fridge. 1. Tall/long fridge end panel on left removed. 2. Skirting on bottom right removed. 3. Fridge slimline cabinet above removed

Hey guys. Looking for an experienced joinery installer to go finish up a job of mine I can’t make it to. Very easy stuff I have photos of what you have to do. Putting shadowlines, fingerpull rails , adjusting, gap filling, drilling handles, hanging rods. Not many handles and rods to do job is mostly finger pull. Just can’t make it out myself so I need to try and find someone to help me finish it off. Job is 95% done. 500$

Looking for joinery installation for single story house. I am after day rate. Everything is pre assembled. In 3 weeks Plans are attached and still is 2 more linens and cupboard for a bathroom that couldn’t attached

Help me put up some mirrors on new tiled bathroom wall and inside joinery. See mirror details below. Purely just a glue to wall job but want support to ensure its done correctly 6mm Silver Polished edges 1-1404 x 1300 4mm Silver Polished edges 1-450 x 1650 1-450 x 1000 2-370 x1100 Thanks Henry

Looking for a carpenter or joinery to build a meter box. 1. Supply and build a wooden meter box (treated weatherproof wood) 2. Box must have a small door for ease of access to meters 3. Install box and mount onto wall Must have tools and insurance for the work.

JOINERY INSTALLER NEEDED – CHATSWOOD Looking for an experienced Joinery Installer for ongoing work in Chatswood. 📍 Location: Chatswood 📅 Start: Monday 22nd September 💰 Rate: $60/hr 🛠 Full set of tools required ✅ Minimum 3 years’ experience ✅ Must have strong attention to detail and deliver a high standard of finish We have 2,000+ units across Sydney, so there is plenty of ongoing work for the right candidate.

Mounted Pullout tiwn bins slides broken, need replacement of slides which I’m unable to find in Bunnings.

I need a tradie who is able to see if my current draw dishwasher can be changed to a full size dishwasher. Ideally person could do whole job I will need to be advised what size dishwasher needs to be purchased. Need full quote for all required

I need a joinery install to install wine area

Need an experienced joiner to go to site and level kick bases, put base cabinets on screw together. Simple stuff easy money for someone who knows what they’re doing.

Cut down joinery 100mm on the left. Must have proper equipment and experience

I have a 60mm diameter hole in a cabinet door (20mm thick) that I want to fill. I have a piece of particle board but I don’t have hole saw or jig saw to cut the piece to plug the hole.

Need someone to help me assemble some large custom furniture as my assistant/sidekick. Woodworking experience favourable but not required. Must be able to: - communicate well - happy to work with another person (me) - physically fit and equivalent strength of medium male (but either gender fine) - Decent eyesight - be tidy Tasks will involve working together with me to move some furniture, lift timber together in specific orientation, keep clean workspace, apply glue, use tape, use clamps etc. Will provide safety equipment (medium gloves and earplugs). All tools and material provided by me. Location: Jannali at my home (10mins walk from station, 30mins from central) Start time: 7am Monday morning Duration: 6hrs (until 1pm) with possibility to extend depending on how project goes. Ideally you would have availability in the afternoon (to discuss) Lunch+drinks: happy to provide

Offer is for a quote. Build a custom joinery against a wall. Will involve two pocket doors- one for an office and one for an actual door.

We have a small circular cut out in the back of some joinery to feed cables and we need to increase the hole slightly so we can fit a hand/arm in. Probably an extra few cm each side so a hand can reach in.

I have two tasks I need done: The first is the bathroom sink: when I unblocked it I noticed that it’s leaking and it seems to be from wear and tear. May need to be sealed. Also have a broken hinge on a kitchen cabinet. This might be able to be fixed but may need to replace hinge also

we have stairs in our house and currently bare underneath. we want a small wall built to frame off under the stairs and then some under stair storage built with doors

Looking for an experienced carpenter or cabinet maker to help design and build custom storage under our staircase. When we knock on the wall under the stairs, it sounds hollow/empty, so we believe there is usable space there that could be converted into storage. We are thinking of two storage sections: - Shoe cabinet on one side - Bookshelf / general storage on the other side I shared photos of the area to give a better idea of the space. Also, references for the storage of what we are thinking. What we need: - Advice on the best way to open and utilise the under-stairs space - Help with design ideas - Build and installation of the storage units Additional details: - Measurements will be provided - Happy for you to visit and quote if needed - If possible, please share photos of similar work you’ve done It would also be helpful if you could provide a rough cost range or estimate based on similar projects before inspection, just so we can understand the typical budget. If the work goes well, we may also have future carpentry projects, such as built-in TV shelving or other custom storage. Thanks!

We would like to have custom fitted under stair storage and cupboard installed and made

Want a licensed builder/carpenter/cabinet maker to supply and install under stair storage with push to open doors and drawers, similar to this instagram post: https://www.instagram.com/reel/DAqolqCqyzy/?igsh=cGp0bmh0NHJuNHpj

I need a door installed to cover off the area under the stairs. Want just a basic door - two panels. No extra features.

I would like to add storage under my staircase. See photo of the current staircase, as well as a photo example of what we want and a video showing how to build it. https://m.youtube.com/watch?v=_Ld3Y1N4X4k Quote is to include labour and materials. The materials just need to be white mdf. Let me know if any questions. Measurements for the triangle section (highlighted in red) under stairs are: - 2000mm width x 1950 tall, 2650mm on diagonal I want to use someone who has done this before.

Carpenter or Cabinet maker to build under stairs storage cabinet

Built in shelving either side of fireplace with curved front Built in storage under stairs - open to design and whatever works best - Due date: Flexible

Looking for someone to build under stair storage to hide away clutter! See photo attached. Open to some options and ideas

Supply FC sheeting and install. Plaster all joints and paint Install skirting and paint - Due date: Flexible