Find experienced local carpenters in VIC

Shop Island Counter needs draws and cupboards installed Exisiting cupboard doors and internal shelving removed and replaced with custom ( to be built) door (left) and 3 draws where current cupboard door is (right) New shelving on far right measurements are 189x75 1 x cupboard door ( far left) 3 x draws ( 2 small 1 large) middle 3 x open shelving ( far right)

Just looking for someone to finish off our kitchen, we are just needing drawer fronts and doors to be done, framework has already been completed need someone to come and measure and quote.

Build custom cabinet, white laminate, as per attached sketch

Paint kitchen joinery including replacing hardware, possibly replacing bench surface

- Door frame needs fixing - Sliding door needs fixing - Outside cabinet door needs fixing

I want to create a vertical queen murphy bed in the guest bedroom (3.7m x 3.2m). Importantly, when it is put away, there needs to be a desk and a mounted monitor ready to be used as an office desk. Also, on one side, it will have some simple shelving because it will be adjacent to a sliding wardrobe (therefore, cannot be a closed cupboard). See screenshot for example of shelving (to the right of the picture).

I have two shelves that need to be hung.

I need a joinery to cut out 10 door and 6 end panels and apply pre glued edge strip for my bathroom and laundry renovation. I also need the sockets for the hinges routed into the doors. The cupboards are already constructed. I have coloured laminate board, pre glued edge strip, and hinges.

Renovating our home and need regular weekend work with myself to assist with the build. Common task are framing, installing cabinetry, underground works, flooring, plastering etc.

Seeking an experienced and professional installer for the pickup, delivery, and assembly of flat pack joinery for a retail store located in the Melbourne CBD. Responsibilities: Collection & Transport: Pick up flat pack components from Heidelberg West (van or ute required) and deliver to the Melbourne CBD site. Site Delivery & Handling: Carefully transport components into the store. Parking is available at the front of the site. Furniture Relocation (Pre-Assembly): Assist in moving existing furniture to accommodate new joinery. Joinery Assembly: Assemble two (2) cupboards: 500mm (W) x 500mm (D) x 500mm (H), 1 door each. Assemble fourteen (14) cupboards: 1000mm (W) x 500mm (D) x 500mm (H), 2 doors each. Includes all door mounting and adjustments for correct alignment. Includes kicker installation. Furniture Relocation (Post-Assembly): Assist in returning existing furniture to its original position. Requirements for Applicants: Demonstrable experience in flat pack joinery assembly, preferably in commercial/retail settings. Own professional tools suitable for joinery assembly. Reliable, with a high standard of workmanship and attention to detail. Access to a suitable vehicle (van or ute) for transport.

I have a walll unit I want quoted to build. Plenty of pics to go from. Can discuss on quote.

Requiring someone experienced with building robe joinery from white melamine. Just wanting shelving, top shelf, mid dividing panel and hanging rails. Will be installing to 3x robes. Requiring: - 2x shelving units to Master Robe - 1x shelving units to two additional Bedrooms - Hanging rail to all Images are examples of what we are wanting.

Just need a bulkhead to be made and installed in kitchen area, it will be approx 2.7 m long

There are 16 H Joiner post of retaining wall which are not cut to size of the retaining g wall, the jotting out edges needs to be cut to level with retaing wall

Wardrobe joinery and cabinets

Looking for someone qualified to come and quote and re build framing above kitchen breast and make ready for joinery to go in.

I have a front study room that i'd like wall panels added too on all three walls and ceiling (i've attached a reference photo of what i'm after). I want the entire room covered with this veneer. I have the veneer (58cmx250cm) - these will need to be applied to a thin plywood (or MDF) and then applied to the walls and ceiling. The room is approx. 2.8m long x 2m wide x 2.1m tall. I have attached a photo of the room (currently painted in green).

Joinery & Build Scope Budget: around $12,000. Happy to discuss and negotiate. Business & Liability Insurances required 1. Demolition • Remove one internal non-load-bearing wall (as per layout) • Remove 1 internal doors (same wall) 2. Frame Carpentry • Construct new MDF walls (e.g. for waxing room) • Supply and install all required framing hardware • Elevation for pedicure, 4 meter L, 1.2m deep and 40cm H, from of the stage 3 drawers equally divided and next to each drawer space for electric socket. The stage should be strong enough to support 3 people sitting plus the chairs Need to do plumber rough in before finalising 3. Plastering • Supply and install plasterboard for new walls • Patch and repair existing walls as needed • Install cornices (e.g. 90 mm Scotia or similar) 4. Joinery • Install kitchen base cabinet (Bunnings-supplied) • Install basin vanity cabinet (Bunnings-supplied) • Tile splashback installation for kitchen and vanity • Install shelving units (approx. 4 lm, 32 mm shelves) (Ikea / Kmart - Supplies) • Construct partition column wall 5. Fixing Carpentry • Fit internal swing door (1) • Install passage sets and door hardware • Install door architraves (67 × 18 MDF profile) • Install skirting boards (92 × 18 MDF, approx. 36.9 lm) 6. WPC Cladding (Or similar wallpaper) Installation • Indoor WPC cladding panels (1 wall) Outdoor signage installation Mhs M

I have one cupboard in our office on which I need the old lock removed and a new one installed. I need two keys with the lock.

I have just had my gas meter moved location. I am need of a plumber urgently to install roughly 1m of copper and joiner to hook up to the relocated meter. Needing done ASAP as my hot water is currently off. See pictures for reference.