Find experienced local carpenters in Baulkham Hills & Hawkesbury

Need joiner to custom make L shape bench seat with storage underneath for shoes in a yoga studio 1.4 m x 400 + 1.6m x 400

Study nook to be converted. Need polytec cabinetry and stone with stone splashback. Led lighting and shelves on the side.

This is Visit + Inspect + Quote Job as of now . Looking for an experienced carpenter/joiner or renovation tradesperson to visit our home, inspect the space and provide a quote for a small renovation to our master bedroom/ensuite area. The proposed work includes: 1. Image 1 - Close the existing opening between the bedroom and walk-in wardrobe to create one clean, continuous wall. 2. Image 2 - Create a new entrance into the walk-in wardrobe from the adjacent wall. 3. Image 3 - Update/reconfigure the existing walk-in wardrobe cabinetry to give it a more modern, premium look At this stage, we are looking for an onsite visit, measurements, recommendations and a detailed quote for the complete job.

We need to make a room into office space and need a someone to custom build the space.

Custom Joinery MDF okay Trying to build bookshelves for a library 5.3m long x 30-35cm deep and 2m-ish height Hoping to get a look like below: https://lovelettersbytori.com/diy-ikea-built-ins-hack/ Dark green colour

Looking for a cabinet maker or joiner to complete two small jobs in my kitchen. 1. Modify the overhead cupboard to suit a new 60cm Bosch slide-out rangehood. The current duct cover is in the middle and may need to be removed or modified to suit the new rangehood. Remove the duct cover basically. 2. Remove the internal shelf (middle shelf) from the another cupboard. Photos are attached.

Hi everyone we are looking for a experience joiner and cabinet maker to help us with a few joinery project for next few months with high salary. Please put your offer to talk more regarding the jobs

Joineries on the 2nd floor of our house appear to be loose/sliding out. Will need someone who has a high enough ladder and experience to come in and fix it. Issue is from 2 sides of the house. Majority is at the back of the house where the first floor roof can be used to reach it The 2nd side is on my neighbors side, and a higher ladder is needed, as it will need to come over the fence in between my neighbor and our house

Have a kitchen bench top that has cracked. Need to have it replaced with a new cooktop and oven

Need my solid hardwood vanities fixed. They are little out of place

I need to install a thermo pine on the back of our TV room. Like the photo. Happy to buy the supplies if you tell me what you need. I have our TV room photo plus the sample picture. The TV needs to be dismantled, timbers get installed and put TV back.

Need someone to build cabinets on top of existing wardrobes. All materials on site only screws and tools to be brought. 4 wardrobes in total 6 x 700h x 1000w 1 x 700h x 500w

Set of drawers to be fixed or replaced as soon as possible.

We’ve recently got joinery done in the office. The carpenter has forgotten to provision for complete length of the channels for LED installation and gone overseas. We need a handy carpenter who knows how to fix this joinery so the electrician can finish the LED installations. There are already channels provided. 3-4 of them need to be increased in length and we need 2 holes done on the office desks to allow for Computer wires. Thanks

Customisation of Wardrobe to add additional storage space and drawers. ● Bedroom 1 (Walk-In Robe): ○ Type: L-shaped configuration, open (no doors). ○ Side X Dimensions: W: 1890mm, H: 2400mm , D: 590mm. ○ Side Y Dimensions: W: 800mm, H: 2400mm, D: 590mm. Required customisation: ● Fit new adjustable shelves (4 shelfs), soft-close 4 drawers and a hanging section that align with the open design. ● Split the top section by adding one shelf in the middle (horizontally) - Bedroom 2 (Walk-In Robe): ○ Type: L-shaped configuration, open (no doors). ○ Side X Dimensions: W: 1250mm, H: 2400mm, D: 590mm (to be confirmed). ○ Side Y Dimensions: W: 1970mm, H: 2400mm, D: 590mm. Required Customisation: Mirror Bedroom 1’s configuration, adapting to the larger Side Y, again using shelves, drawers and hanging rods. ● Bedroom 3: ○ Type: Single swing door wardrobe ○ Dimensions: W: 1100mm, H: 2400mm, D: 650mm. Required Customisation: - Add 4 shelving on the left side without disturbing the hanging rail . ● Bedroom 4: ○ Type: Sliding door wardrobe with mirrored doors. ○ Dimensions: W: 1550mm, H: 2400mm, D: 550mm. Required customisation: Split in 2 columns, double-hanging on column 1, Column 2 will have open 3-4 shelves at the top and 3 drawers at the bottom.

We have an independent double bowl sink and dishwasher in a box. These have to be installed next to each other and we don’t need any remaining cabinets. I will attach a picture for reference, I highlighted the work to be done in green and crossed anything else

We are looking for an experienced carpenter/joiner to design, build and install custom cabinetry and shelving for two spaces in our home: 1. Home Office Nook • Install cabinetry and shelving along one wall (wooden laminate finish, with option for warm LED strip lighting). • Create an L-shaped wraparound desk with drawers (may not require drawers on both sides). • Include a built-in bench seat under the window with storage drawers underneath. 2. Living Room (TV Wall) • Build custom cabinetry under wall-mounted TV (mix of drawers and cupboards for Playstation, storage etc). • Add shelving on either side of the TV (open shelves, wooden laminate). • Option for warm LED strip lighting if possible. Requirements: • Experience with custom joinery/cabinetry. • Able to measure, design, build, and install. • Supply and install materials (laminate finish preferred, open to recommendations). • Quality workmanship with clean, modern style (similar to attached references). Photos attached for reference. Please include examples of past work, approximate timing, and cost estimate. Budget $9,999 Initial payment $20 to come and measure/quote

Looking for joiner or cabinet maker we have a custom furniture that is imported, furniture is unique and not a standard flat-pack item. Looking for some one who has experience with "custom joinery," "bespoke furniture," or "fine woodworking. we need assistance with installing a vertical wall bed unit in our guest room. The boxes have been opened by movers , but the assembly instructions are missing . we can share pictures and video of the final product for reference.

Hi there! I’m looking for a reliable and skilled joinery assistant to help me on-site for 1 to 2 days. I’m the main joinery, just need an extra set of hands to assist with various tasks. Job Details: • Location: Box Hill Requirements: • Some joinery experience (basic tools knowledge, measurements, cutting, assembling, etc.) • Able to follow directions and work efficiently • Must be punctual and reliable

Handyman to install shelves in new walk in closet space. Box hill area. I’ll buy the parts from Bunnings.