Find experienced local carpenters in NSW

Need a cabinet maker to make a unique custome bed side table that can secretly and sophisticated hide valuables (ie secret section that opens to magnet)

Looking for a carpenter/experienced handyman to build a freestanding privacy partition around my office desk, similar to the attached reference photos. 2 partitions 3M wide each Each 2M in height Approx 70-100mm thick Tasker must source, purchase and transport all materials. Partition needs to be stable/freestanding and professionally finished. No fixing into the office floor. Ideally constructed in sections so it can be moved or removed later. Office is on the first floor with stairs/no lift. Please include all labour, materials and transport in your offer. Need done ASAP.

Looking for an experienced Kaboodle installer/cabinet maker to complete the finishing work on our laundry cabinetry. Cabinetry is already installed and all required Kaboodle parts/materials are supplied. Work required includes fitting/cutting the kickboard and end panel, adjusting and aligning the existing cabinet doors/fronts so gaps are even, and assembling/installing a Kaboodle laundry cupboard insert inside an existing tall cabinet. Important: the laundry cupboard insert is slightly too deep for the existing cabinet, so it will need to be accurately trimmed/reduced in depth before being assembled and installed. Please bring all tools required for accurate, clean cabinetry cuts and installation. Looking for someone with cabinetry/Kaboodle installation experience rather than general furniture assembly. Photos attached showing existing cabinetry and tall cupboard.

Garden steps require replacing . Garden shed timber balcony and some supporting beams need replacing. Want to convert shed to teenage cave

Looking for a painter to prime with a stain blocking base and repaint a room. Dimensions approx 2.84m by 3.59m, plus the ceiling. One wall has a window which is approx 1.795m wide by 1.47m high. Bring your own tools and products and include all labour and materials in the quote. Prefer not to remove the wall mounted AC. Wall mounted TV either needs safe removal and remount, or paint carefully around it.

I need a hardwood deck completely stripped, sanded and stained. Approx 70sqm. All equiped to be supplied by person accepted to do job. I have put a figure in the quote but happy to negotiate.

Need a study corner to be closed off into a bedroom. Install a barn door for the doorway. Install a right angle floor to ceiling wall on the other opening. Supply and install, include materials

Mounted Pullout tiwn bins slides broken, need replacement of slides which I’m unable to find in Bunnings.

Need an experienced joiner to go to site and level kick bases, put base cabinets on screw together. Simple stuff easy money for someone who knows what they’re doing.

Drill and hang 8 custom IKEA kitchen cabinet doors — Crows Nest I need an experienced cabinetmaker, kitchen installer, or highly capable handyman to drill the concealed-hinge holes in 8 new custom cabinet doors, then fit and align them on my existing IKEA kitchen cabinetry. The cabinet carcasses and IKEA-style hinge mounting plates are already installed. The new doors are on site, still wrapped, and ready to be drilled and hung. Scope • Measure and mark each door based on the existing cabinet-side hinge/mounting-plate positions • Drill the correct hinge pattern for IKEA UTRUSTA / METOD-style concealed hinges • Fit hinges to each door and attach them to the existing mounting plates • Hang, align and adjust all 8 doors for consistent gaps and smooth opening/closing • Keep doors protected during work and clean up all drilling dust/debris Hinge details These are standard European-style concealed cup hinges: • 35 mm hinge-cup hole • Approx. 11.5–12 mm deep — absolutely must not drill through the front face • Two smaller adjacent locating/screw holes for the hinge hardware • Existing kitchen and hinge close-up are shown in the photos Important: Please confirm the exact cup-hole setback, vertical hinge positions and smaller-hole pattern from the actual existing hinges/cabinet locations before drilling. I do not want generic measurements used blindly. Ideally, test-fit one door first, confirm alignment, then complete the rest. Tools required Please bring appropriate tools, ideally including: • 35 mm Forstner bit or concealed-hinge drilling jig • Depth stop • Drill/driver and smaller drill bits • Measuring/marking tools, clamps, etc. Please confirm you have a suitable 35 mm hinge jig or Forstner bit with depth control. Budget and location Budget: $400 total for drilling, fitting, hanging and final adjustment of 8 doors. Located in Crows Nest, NSW. Flexible on day/time.

1. Replace/renovate cupboard to nicer one. 2. Add shelves (See pictures for example) 3. Add table top and sides design to enclose existing fridge area 4. Enclose top storage area with sliding doors to cover storage. Attached are photos of the place, plans and an AI example (preferably with wood colour that matches current wood in shop). Send your quotes. Happy to arrange an in person measure and quote as well.

I have 2 double door corner cabinets that dont close properly

We recently had blinds removed from around these timber doors/windows, and the top section has been left looking unfinished. I’m not exactly sure what needs to be done, but I’d like the top of the doors/windows to look the same as the timber sides, so it looks like there is one continuous, finished timber border all the way around. This may mean a new architrave to match the left and righthand sides Looking for someone experienced with carpentry/joinery who can look at the photos, advise on the best way to do this, and complete the work. Ideally the new timber/finish would match the existing frame as closely as possible. Please include your proposed approach and approximate materials cost in your offer. It would need to be done some time this Sunday or Monday. Thanks!

Kitchen & cabinetry dismantle – Bowral – 12/13 Sept We’re looking for an experienced kitchen installer, cabinetmaker or carpenter to carefully dismantle a kitchen and other cabinetry at a home in Bowral. Dates: 12–13 September, with 14 September available if required. Everything is being reused, so the cabinetry needs to be carefully dismantled, labelled and organised rather than demolished. The job includes: * Kitchen cabinetry and island * Stone/marble benchtops * Vanities * Built-in wardrobes * Banquette seating * Associated doors, panels, shelving and fittings Photos are attached and further measurements/details can be provided. Everything will need to be dismantled carefully, with components labelled and screws/fittings kept together, then organised and stacked in the garage ready for collection by our delivery driver. There are stone/marble benchtops, so please let us know if you’re comfortable removing these for reuse or if you recommend they are handled separately. Plumbing/electrical disconnections can be arranged separately where required. Potential follow-on work We are posting two separate installation jobs in Balmain for approximately 21/22 September: one for kitchen reinstallation and another for wardrobe/cabinetry reinstallation. If you’re interested in the follow-on work, please see our other Airtasker listings and let us know. We’d be happy to use the same person/team for dismantling and installation if it works. Please quote for the Bowral dismantling only on this task. When responding, please let us know your relevant experience, availability for 12–14 September, how many people you would bring and approximately how long you expect the job to take. Thanks!

Looking for someone experienced to oil/stain our new timber fence in Drummoyne. Fence is approximately 8.6m long × 2.1m high (18m²) * I will supply the timber oil * You supply brushes/rollers and all other equipment * Protect surrounding artificial grass, paving, walls and garden from drips/splashes * Leave the area clean and tidy afterwards Only the one visible side of the fence shown in the photo needs to be done. Looking for someone with experience.

See corner insert that rotted away because of leak from roof. Now leak is repaired. So need area cleaned up, then replaced with new timber (will be supplied). Can be glued or otherwise held together. (One part of the material may be asbestos material so best to be gentle). It's about 4 meters high, so need ladder

I’m looking for someone who can take down an old bathroom cabinet & build and put up a new one. The measurements of the old one are 60cm x 70cm & the new one is roughly 65cm x 70cm.

Small section of timber flooring needs to be installed. This will include purchasing floorboards, install them and staining them ensuring they match the existing flooring. Subfloor may also need to be replaced. Happy to negotiate price pending scope

Hello, We are looking for an experienced handyman, cabinet maker, or carpenter to repair a broken drawer front at our retail store, in Westfield Hurstville. The Issue: The timber front face of one of our main under-counter glasses storage drawers has completely broken/riipped off the drawer box. The drawer became jammed and had to be forced open, which pulled the face off, splitting the internal MDF backing where the brad nails were secured. The loose timber face has been set aside. The Job: The task is to securely re-attach the timber drawer front to the drawer box. The scope of work includes: 1. Preparing the back of the timber drawer front and the front of the white drawer box (removing old nails/staples). 2. Repairing the damaged MDF backing on the timber front using a strong wood glue, epoxy, or timber blocking to ensure a durable bond. 3. Securely mounting the timber face back onto the drawer box (recommend screwing it from the inside of the box for maximum strength). 4. Checking and adjusting the drawer runners/tracks so the drawer opens and closes smoothly without jamming. 5. Checking the adjacent drawer to ensure it is also aligned and operating smoothly. Requirements: - Proven experience with cabinetry or furniture repairs (specifically re-securing drawer fronts and repairing split MDF/timber). - You must supply all your own tools and materials (heavy-duty wood glue, clamps, screws). - Ability to work cleanly and professionally within a live retail environment. - Public liability insurance is required. Location & Timing: Location: Westfield Hurstville, 3 Cross Street, Hurstville NSW 2220 When: The job can be completed at your earliest convenience. Please state your availability in your offer. Please provide a quote for the complete repair. Thank you.

I have a wall cupboard that was damaged while being moved. I have removed a 600 x 400 x 2100 cupboard section and have a ready made replacement for that section. All 10 doors need to be drilled onto the unit. I have photographed both the wall unit and the replacement section. The unit may be best fixed while lying on floor allowing you to remove the old cupboard side without the whole unit falling apart (Lie it down?). This is not a hard job, it just requires somebody who knows how to use tools. If you need help there are two of us here to help lift or move or hold it while drilling. My partner and I are here to help Sunday 6th after 3pm or Monday 7th afternoon or Tuesday morning 7 - 9.30 am or 11.30 a m - 1.30 pm the following saturday 11th. PHOTOS: 1 Entire BESTA unit 2 The side which requires 2 parts being removed 3 same 4 same 5 The unit that will replace broken part (same BESTA product) Doors to be changed